]> Joshua Wise's Git repositories - firearm.git/commitdiff
Execute.v: Execute multiplication happily
authorJoshua Wise <joshua@nyus.joshuawise.com>
Wed, 31 Dec 2008 09:21:11 +0000 (04:21 -0500)
committerJoshua Wise <joshua@nyus.joshuawise.com>
Wed, 31 Dec 2008 09:21:11 +0000 (04:21 -0500)
Execute.v

index ac759bb8b69642a8938665d6c97a35c21fff50ab..ea6cd60d3ef74e3e8cb02d35c9afdf7763f59ecb 100644 (file)
--- a/Execute.v
+++ b/Execute.v
@@ -62,6 +62,10 @@ module Execute(
                end
        end
 
                end
        end
 
+       reg prevstall = 0;
+       always @(posedge clk)
+               prevstall <= outstall;
+
        always @(*)
        begin
                outstall = stall;
        always @(*)
        begin
                outstall = stall;
@@ -71,13 +75,34 @@ module Execute(
                next_write_num = 4'hx;
                next_write_data = 32'hxxxxxxxx;
        
                next_write_num = 4'hx;
                next_write_data = 32'hxxxxxxxx;
        
+               mult_start = 0;
+               mult_acc0 = 32'hxxxxxxxx;
+               mult_in0 = 32'hxxxxxxxx;
+               mult_in1 = 32'hxxxxxxxx;
+       
                alu_in0 = 32'hxxxxxxxx;
                alu_in1 = 32'hxxxxxxxx;
                alu_op = 4'hx;  /* hax! */
                alu_setflags = 1'bx;
                
                casez (insn)
                alu_in0 = 32'hxxxxxxxx;
                alu_in1 = 32'hxxxxxxxx;
                alu_op = 4'hx;  /* hax! */
                alu_setflags = 1'bx;
                
                casez (insn)
-               `DECODE_ALU_MULT,       /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+               `DECODE_ALU_MULT:       /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+               begin
+                       if (!prevstall && !inbubble)
+                       begin
+                               mult_start = 1;
+                               mult_acc0 = insn[21] /* A */ ? op0 /* Rn */ : 32'h0;
+                               mult_in0 = op1 /* Rm */;
+                               mult_in1 = op2 /* Rs */;
+                               $display("New MUL instruction");
+                       end
+                       outstall = stall | ((!prevstall | !mult_done) && !inbubble);
+                       next_outbubble = inbubble | !mult_done | !prevstall;
+                       next_outcpsr = insn[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr[28] /* V */, cpsr[27:0]} : cpsr;
+                       next_write_reg = 1;
+                       next_write_num = insn[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
+                       next_write_data = mult_result;
+               end
 //             `DECODE_ALU_MUL_LONG,   /* Multiply long */
                `DECODE_ALU_MRS,        /* MRS (Transfer PSR to register) */
                `DECODE_ALU_MSR,        /* MSR (Transfer register to PSR) */
 //             `DECODE_ALU_MUL_LONG,   /* Multiply long */
                `DECODE_ALU_MRS,        /* MRS (Transfer PSR to register) */
                `DECODE_ALU_MSR,        /* MSR (Transfer register to PSR) */
This page took 0.025881 seconds and 4 git commands to generate.