[firearm.git] / Execute.v

module Execute(
	input clk,
	input Nrst,	/* XXX not used yet */
	
	input stall,
	input flush,
	
	input inbubble,
	input [31:0] pc,
	input [31:0] insn,
	input [31:0] cpsr,
	input [31:0] spsr,
	input [31:0] op0,
	input [31:0] op1,
	input [31:0] op2,
	input carry,
	
	output reg outstall = 0,
	output reg outbubble = 1,
	output reg [31:0] outcpsr = 0,
	output reg [31:0] outspsr = 0,
	output reg write_reg = 1'bx,
	output reg [3:0] write_num = 4'bxxxx,
	output reg [31:0] write_data = 32'hxxxxxxxx,
	output reg [31:0] jmppc,
	output reg jmp,
	output reg [31:0] outpc,
	output reg [31:0] outinsn,
	output reg [31:0] outop0, outop1, outop2
	);
	
	reg mult_start;
	reg [31:0] mult_acc0, mult_in0, mult_in1;
	wire mult_done;
	wire [31:0] mult_result;
	
	reg [31:0] alu_in0, alu_in1;
	reg [3:0] alu_op;
	reg alu_setflags;
	wire [31:0] alu_result, alu_outcpsr;
	wire alu_setres;
	
	reg next_outbubble;
	reg [31:0] next_outcpsr, next_outspsr;
	reg next_write_reg;
	reg [3:0] next_write_num;

	reg [31:0] next_write_data;

	Multiplier multiplier(
		.clk(clk), .Nrst(Nrst),
		.start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
		.in1(mult_in1), .done(mult_done), .result(mult_result));
	
	ALU alu(
		.clk(clk), .Nrst(Nrst),
		.in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op),
		.setflags(alu_setflags), .shifter_carry(carry),
		.result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres));

	always @(posedge clk)
	begin
		if (!stall)
		begin
			outbubble <= next_outbubble;
			outcpsr <= next_outcpsr;
			outspsr <= next_outspsr;
			write_reg <= next_write_reg;
			write_num <= next_write_num;
			write_data <= next_write_data;
			outpc <= pc;
			outinsn <= insn;
			outop0 <= op0;
			outop1 <= op1;
			outop2 <= op2;
		end
	end
	
	reg delayedflush = 0;
	always @(posedge clk)
		if (flush && outstall /* halp! I can't do it now, maybe later? */)
			delayedflush <= 1;
		else if (!outstall /* anything has been handled this time around */)
			delayedflush <= 0;

	reg prevstall = 0;
	always @(posedge clk)
		prevstall <= outstall;

	always @(*)
	begin
		outstall = stall;
		next_outbubble = inbubble | flush | delayedflush;
		next_outcpsr = cpsr;
		next_outspsr = spsr;
		next_write_reg = 0;
		next_write_num = 4'hx;
		next_write_data = 32'hxxxxxxxx;

		mult_start = 0;
		mult_acc0 = 32'hxxxxxxxx;
		mult_in0 = 32'hxxxxxxxx;
		mult_in1 = 32'hxxxxxxxx;

		alu_in0 = 32'hxxxxxxxx;
		alu_in1 = 32'hxxxxxxxx;
		alu_op = 4'hx;	/* hax! */
		alu_setflags = 1'bx;

		jmp = 1'b0;
		jmppc = 32'h00000000;

		casez (insn)
		`DECODE_ALU_MULT:	/* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
		begin
			if (!prevstall && !inbubble)
			begin
				mult_start = 1;
				mult_acc0 = insn[21] /* A */ ? op0 /* Rn */ : 32'h0;
				mult_in0 = op1 /* Rm */;
				mult_in1 = op2 /* Rs */;
				$display("New MUL instruction");
			end
			outstall = stall | ((!prevstall | !mult_done) && !inbubble);
			next_outbubble = inbubble | !mult_done | !prevstall;
			next_outcpsr = insn[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr[28] /* V */, cpsr[27:0]} : cpsr;
			next_write_reg = 1;
			next_write_num = insn[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
			next_write_data = mult_result;
		end
//		`DECODE_ALU_MUL_LONG,	/* Multiply long */
		`DECODE_ALU_MRS:	/* MRS (Transfer PSR to register) */
		begin
			next_write_reg = 1;
			next_write_num = insn[15:12];
			if (insn[22] /* Ps */)
				next_write_data = spsr;
			else
				next_write_data = cpsr;
		end
		`DECODE_ALU_MSR,	/* MSR (Transfer register to PSR) */
		`DECODE_ALU_MSR_FLAGS:	/* MSR (Transfer register or immediate to PSR, flag bits only) */
			if ((cpsr[4:0] == `MODE_USR) || (insn[16] /* that random bit */ == 1'b0))	/* flags only */
			begin
				if (insn[22] /* Ps */)
					next_outspsr = {op0[31:29], spsr[28:0]};
				else
					next_outcpsr = {op0[31:29], cpsr[28:0]};
			end else begin
				if (insn[22] /* Ps */)
					next_outspsr = op0;
				else
					next_outcpsr = op0;
			end
		`DECODE_ALU_SWP,	/* Atomic swap */
		`DECODE_ALU_BX,		/* Branch */
		`DECODE_ALU_HDATA_REG,	/* Halfword transfer - register offset */
		`DECODE_ALU_HDATA_IMM:	/* Halfword transfer - immediate offset */
		begin end
		`DECODE_ALU:		/* ALU */
		begin
			alu_in0 = op0;
			alu_in1 = op1;
			alu_op = insn[24:21];
			alu_setflags = insn[20] /* S */;
			
			if (alu_setres) begin
				next_write_reg = 1;
				next_write_num = insn[15:12] /* Rd */;
				next_write_data = alu_result;
			end
			
			next_outcpsr = ((insn[15:12] == 4'b1111) && insn[20]) ? spsr : alu_outcpsr;
		end
		`DECODE_LDRSTR_UNDEFINED,	/* Undefined. I hate ARM */
		`DECODE_LDRSTR,		/* Single data transfer */
		`DECODE_LDMSTM:		/* Block data transfer */
		begin end
		`DECODE_BRANCH:
		begin
			if(!inbubble && !flush && !delayedflush) begin
				jmppc = pc + op0 + 32'h8;
				if(insn[24]) begin
					next_write_reg = 1;
					next_write_num = 4'hE; /* link register */
					next_write_data = pc + 32'h4;
				end
				jmp = 1'b1;
			end
		end                     /* Branch */
		`DECODE_LDCSTC,		/* Coprocessor data transfer */
		`DECODE_CDP,		/* Coprocessor data op */
		`DECODE_MRCMCR,		/* Coprocessor register transfer */
		`DECODE_SWI:		/* SWI */
		begin end
		default:		/* X everything else out */
		begin end
		endcase
	end
endmodule

module Multiplier(
	input clk,
	input Nrst,	/* XXX not used yet */
	
	input start,
	input [31:0] acc0,
	input [31:0] in0,
	input [31:0] in1,
	
	output reg done = 0,
	output reg [31:0] result);
	
	reg [31:0] bitfield;
	reg [31:0] multiplicand;
	reg [31:0] acc;
	
	always @(posedge clk)
	begin
		if (start) begin
			bitfield <= in0;
			multiplicand <= in1;
			acc <= acc0;
			done <= 0;
		end else begin
			bitfield <= {2'b00, bitfield[31:2]};
			multiplicand <= {multiplicand[29:0], 2'b00};
			acc <= acc +
				(bitfield[0] ? multiplicand : 0) +
				(bitfield[1] ? {multiplicand[30:0], 1'b0} : 0);
			if (bitfield == 0) begin
				result <= acc;
				done <= 1;
			end
		end
	end
endmodule

module ALU(
	input clk,
	input Nrst,	/* XXX not used yet */

	input [31:0] in0,
	input [31:0] in1,
	input [31:0] cpsr,
	input [3:0] op,
	input setflags,
	input shifter_carry,

	output reg [31:0] result,
	output reg [31:0] cpsr_out,
	output reg setres
);
	reg [31:0] res;
	reg flag_n, flag_z, flag_c, flag_v;
	wire [32:0] sum, diff, rdiff;
	wire sum_v, diff_v, rdiff_v;

	assign sum = {1'b0, in0} + {1'b0, in1};
	assign diff = {1'b0, in0} - {1'b0, in1};
	assign rdiff = {1'b0, in1} + {1'b0, in0};
	assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
	assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
	assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);

	always @(*) begin
		res = 32'hxxxxxxxx;
		setres = 1'bx;
		flag_c = cpsr[`CPSR_C];
		flag_v = cpsr[`CPSR_V];
		case(op)
		`ALU_AND: begin
			result = in0 & in1;
			flag_c = shifter_carry;
			setres = 1'b1;
		end
		`ALU_EOR: begin
			result = in0 ^ in1;
			flag_c = shifter_carry;
			setres = 1'b1;
		end
		`ALU_SUB: begin
			{flag_c, result} = diff;
			flag_v = diff_v;
			setres = 1'b1;
		end
		`ALU_RSB: begin
			{flag_c, result} = rdiff;
			flag_v = rdiff_v;
			setres = 1'b1;
		end
		`ALU_ADD: begin
			{flag_c, result} = sum;
			flag_v = sum_v;
			setres = 1'b1;
		end
		`ALU_ADC: begin
			{flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
			flag_v = sum_v | (~sum[31] & result[31]);
			setres = 1'b1;
		end
		`ALU_SBC: begin
			{flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
			flag_v = diff_v | (diff[31] & ~result[31]);
			setres = 1'b1;
		end
		`ALU_RSC: begin
			{flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
			flag_v = rdiff_v | (rdiff[31] & ~result[31]);
			setres = 1'b1;
		end
		`ALU_TST: begin
			result = in0 & in1;
			flag_c = shifter_carry;
			setres = 1'b0;
		end
		`ALU_TEQ: begin
			result = in0 ^ in1;
			flag_c = shifter_carry;
			setres = 1'b0;
		end
		`ALU_CMP: begin
			{flag_c, result} = diff;
			flag_v = diff_v;
			setres = 1'b0;
		end
		`ALU_CMN: begin
			{flag_c, result} = sum;
			flag_v = sum_v;
			setres = 1'b0;
		end
		`ALU_ORR: begin
			result = in0 | in1;
			flag_c = shifter_carry;
			setres = 1'b1;
		end
		`ALU_MOV: begin
			result = in1;
			flag_c = shifter_carry;
			setres = 1'b1;
		end
		`ALU_BIC: begin
			result = in0 & (~in1);
			flag_c = shifter_carry;
			setres = 1'b1;
		end
		`ALU_MVN: begin
			result = ~in1;
			flag_c = shifter_carry;
			setres = 1'b1;
		end
		endcase
		
		flag_z = (result == 0);
		flag_n = result[31];
		
		cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
	end
endmodule
Commit	Line	Data
5b3daee2 JW	1	module Execute(
	2	input clk,
	3	input Nrst, /* XXX not used yet */
	4
	5	input stall,
	6	input flush,
	7
	8	input inbubble,
	9	input [31:0] pc,
	10	input [31:0] insn,
	11	input [31:0] cpsr,
cb0428b6	12	input [31:0] spsr,
3f5cefe1 JW	13	input [31:0] op0,
	14	input [31:0] op1,
	15	input [31:0] op2,
	16	input carry,
5b3daee2 JW	17
5b3daee2 JW	18	output reg outstall = 0,
bc572c5f	19	output reg outbubble = 1,
6e3dfd79	20	output reg [31:0] outcpsr = 0,
cb0428b6	21	output reg [31:0] outspsr = 0,
bc572c5f JW	22	output reg write_reg = 1'bx,
bc572c5f JW	23	output reg [3:0] write_num = 4'bxxxx,
314dac21	24	output reg [31:0] write_data = 32'hxxxxxxxx,
149bcd1a	25	output reg [31:0] jmppc,
2393422a JW	26	output reg jmp,
2393422a JW	27	output reg [31:0] outpc,
c65110a8 JW	28	output reg [31:0] outinsn,
c65110a8 JW	29	output reg [31:0] outop0, outop1, outop2
5b3daee2	30	);
5b3daee2	31
bc572c5f JW	32	reg mult_start;
	33	reg [31:0] mult_acc0, mult_in0, mult_in1;
	34	wire mult_done;
	35	wire [31:0] mult_result;
	36
2b091cd4 JW	37	reg [31:0] alu_in0, alu_in1;
	38	reg [3:0] alu_op;
	39	reg alu_setflags;
6e3dfd79	40	wire [31:0] alu_result, alu_outcpsr;
732b7730 JW	41	wire alu_setres;
	42
	43	reg next_outbubble;
cb0428b6	44	reg [31:0] next_outcpsr, next_outspsr;
732b7730 JW	45	reg next_write_reg;
732b7730 JW	46	reg [3:0] next_write_num;
149bcd1a	47
732b7730	48	reg [31:0] next_write_data;
149bcd1a	49
bc572c5f JW	50	Multiplier multiplier(
	51	.clk(clk), .Nrst(Nrst),
	52	.start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
	53	.in1(mult_in1), .done(mult_done), .result(mult_result));
6e3dfd79 JW	54
	55	ALU alu(
	56	.clk(clk), .Nrst(Nrst),
	57	.in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op),
	58	.setflags(alu_setflags), .shifter_carry(carry),
732b7730	59	.result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres));
b770ec9a	60
732b7730 JW	61	always @(posedge clk)
	62	begin
	63	if (!stall)
	64	begin
	65	outbubble <= next_outbubble;
	66	outcpsr <= next_outcpsr;
cb0428b6	67	outspsr <= next_outspsr;
732b7730 JW	68	write_reg <= next_write_reg;
	69	write_num <= next_write_num;
	70	write_data <= next_write_data;
2393422a JW	71	outpc <= pc;
2393422a JW	72	outinsn <= insn;
c65110a8 JW	73	outop0 <= op0;
	74	outop1 <= op1;
	75	outop2 <= op2;
732b7730 JW	76	end
732b7730 JW	77	end
b770ec9a JW	78
	79	reg delayedflush = 0;
	80	always @(posedge clk)
	81	if (flush && outstall /* halp! I can't do it now, maybe later? */)
	82	delayedflush <= 1;
	83	else if (!outstall /* anything has been handled this time around */)
	84	delayedflush <= 0;
2b091cd4	85
af096d96 JW	86	reg prevstall = 0;
	87	always @(posedge clk)
	88	prevstall <= outstall;
	89
2b091cd4	90	always @(*)
732b7730 JW	91	begin
732b7730 JW	92	outstall = stall;
b770ec9a	93	next_outbubble = inbubble \| flush \| delayedflush;
732b7730	94	next_outcpsr = cpsr;
cb0428b6	95	next_outspsr = spsr;
732b7730 JW	96	next_write_reg = 0;
	97	next_write_num = 4'hx;
	98	next_write_data = 32'hxxxxxxxx;
149bcd1a	99
af096d96 JW	100	mult_start = 0;
	101	mult_acc0 = 32'hxxxxxxxx;
	102	mult_in0 = 32'hxxxxxxxx;
	103	mult_in1 = 32'hxxxxxxxx;
149bcd1a	104
732b7730 JW	105	alu_in0 = 32'hxxxxxxxx;
	106	alu_in1 = 32'hxxxxxxxx;
	107	alu_op = 4'hx; /* hax! */
	108	alu_setflags = 1'bx;
149bcd1a CL	109
149bcd1a CL	110	jmp = 1'b0;
ab7ee9fc	111	jmppc = 32'h00000000;
149bcd1a	112
2b091cd4	113	casez (insn)
af096d96 JW	114	`DECODE_ALU_MULT: /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
	115	begin
	116	if (!prevstall && !inbubble)
	117	begin
	118	mult_start = 1;
	119	mult_acc0 = insn[21] /* A / ? op0 / Rn */ : 32'h0;
	120	mult_in0 = op1 /* Rm */;
	121	mult_in1 = op2 /* Rs */;
	122	$display("New MUL instruction");
	123	end
	124	outstall = stall \| ((!prevstall \| !mult_done) && !inbubble);
	125	next_outbubble = inbubble \| !mult_done \| !prevstall;
	126	next_outcpsr = insn[20] /* S / ? {mult_result[31] / N /, mult_result == 0 / Z /, 1'b0 / C /, cpsr[28] / V */, cpsr[27:0]} : cpsr;
	127	next_write_reg = 1;
	128	next_write_num = insn[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
	129	next_write_data = mult_result;
	130	end
2b091cd4	131	// `DECODE_ALU_MUL_LONG, /* Multiply long */
cb0428b6 JW	132	`DECODE_ALU_MRS: /* MRS (Transfer PSR to register) */
	133	begin
	134	next_write_reg = 1;
	135	next_write_num = insn[15:12];
	136	if (insn[22] /* Ps */)
	137	next_write_data = spsr;
	138	else
	139	next_write_data = cpsr;
	140	end
2b091cd4	141	`DECODE_ALU_MSR, /* MSR (Transfer register to PSR) */
cb0428b6 JW	142	`DECODE_ALU_MSR_FLAGS: /* MSR (Transfer register or immediate to PSR, flag bits only) */
	143	if ((cpsr[4:0] == `MODE_USR) \|\| (insn[16] /* that random bit / == 1'b0)) / flags only */
	144	begin
	145	if (insn[22] /* Ps */)
	146	next_outspsr = {op0[31:29], spsr[28:0]};
	147	else
	148	next_outcpsr = {op0[31:29], cpsr[28:0]};
	149	end else begin
	150	if (insn[22] /* Ps */)
	151	next_outspsr = op0;
	152	else
	153	next_outcpsr = op0;
	154	end
2b091cd4 JW	155	`DECODE_ALU_SWP, /* Atomic swap */
	156	`DECODE_ALU_BX, /* Branch */
	157	`DECODE_ALU_HDATA_REG, /* Halfword transfer - register offset */
732b7730 JW	158	`DECODE_ALU_HDATA_IMM: /* Halfword transfer - immediate offset */
	159	begin end
	160	`DECODE_ALU: /* ALU */
	161	begin
	162	alu_in0 = op0;
	163	alu_in1 = op1;
	164	alu_op = insn[24:21];
cb0428b6	165	alu_setflags = insn[20] /* S */;
732b7730 JW	166
	167	if (alu_setres) begin
	168	next_write_reg = 1;
	169	next_write_num = insn[15:12] /* Rd */;
	170	next_write_data = alu_result;
	171	end
	172
cb0428b6	173	next_outcpsr = ((insn[15:12] == 4'b1111) && insn[20]) ? spsr : alu_outcpsr;
732b7730	174	end
2b091cd4 JW	175	`DECODE_LDRSTR_UNDEFINED, /* Undefined. I hate ARM */
2b091cd4 JW	176	`DECODE_LDRSTR, /* Single data transfer */
314dac21 CL	177	`DECODE_LDMSTM: /* Block data transfer */
	178	begin end
	179	`DECODE_BRANCH:
	180	begin
b770ec9a	181	if(!inbubble && !flush && !delayedflush) begin
f8bf38ca CL	182	jmppc = pc + op0 + 32'h8;
	183	if(insn[24]) begin
	184	next_write_reg = 1;
	185	next_write_num = 4'hE; /* link register */
dbf45af6	186	next_write_data = pc + 32'h4;
f8bf38ca CL	187	end
f8bf38ca CL	188	jmp = 1'b1;
314dac21 CL	189	end
314dac21 CL	190	end /* Branch */
2b091cd4 JW	191	`DECODE_LDCSTC, /* Coprocessor data transfer */
	192	`DECODE_CDP, /* Coprocessor data op */
	193	`DECODE_MRCMCR, /* Coprocessor register transfer */
	194	`DECODE_SWI: /* SWI */
	195	begin end
	196	default: /* X everything else out */
	197	begin end
	198	endcase
732b7730	199	end
5b3daee2	200	endmodule
07fbfa80 JW	201
	202	module Multiplier(
	203	input clk,
	204	input Nrst, /* XXX not used yet */
	205
	206	input start,
	207	input [31:0] acc0,
	208	input [31:0] in0,
	209	input [31:0] in1,
	210
	211	output reg done = 0,
	212	output reg [31:0] result);
	213
	214	reg [31:0] bitfield;
	215	reg [31:0] multiplicand;
	216	reg [31:0] acc;
	217
	218	always @(posedge clk)
	219	begin
	220	if (start) begin
	221	bitfield <= in0;
	222	multiplicand <= in1;
	223	acc <= acc0;
	224	done <= 0;
	225	end else begin
	226	bitfield <= {2'b00, bitfield[31:2]};
	227	multiplicand <= {multiplicand[29:0], 2'b00};
	228	acc <= acc +
	229	(bitfield[0] ? multiplicand : 0) +
	230	(bitfield[1] ? {multiplicand[30:0], 1'b0} : 0);
	231	if (bitfield == 0) begin
	232	result <= acc;
	233	done <= 1;
	234	end
	235	end
	236	end
	237	endmodule
879a3986	238
879a3986 CL	239	module ALU(
	240	input clk,
	241	input Nrst, /* XXX not used yet */
	242
	243	input [31:0] in0,
	244	input [31:0] in1,
	245	input [31:0] cpsr,
	246	input [3:0] op,
	247	input setflags,
	248	input shifter_carry,
	249
	250	output reg [31:0] result,
	251	output reg [31:0] cpsr_out,
732b7730	252	output reg setres
879a3986	253	);
7947b9c7 JW	254	reg [31:0] res;
7947b9c7 JW	255	reg flag_n, flag_z, flag_c, flag_v;
879a3986	256	wire [32:0] sum, diff, rdiff;
793482e9	257	wire sum_v, diff_v, rdiff_v;
879a3986 CL	258
	259	assign sum = {1'b0, in0} + {1'b0, in1};
	260	assign diff = {1'b0, in0} - {1'b0, in1};
	261	assign rdiff = {1'b0, in1} + {1'b0, in0};
793482e9 CL	262	assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
	263	assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
	264	assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);
879a3986	265
879a3986 CL	266	always @(*) begin
	267	res = 32'hxxxxxxxx;
	268	setres = 1'bx;
	269	flag_c = cpsr[`CPSR_C];
	270	flag_v = cpsr[`CPSR_V];
	271	case(op)
	272	`ALU_AND: begin
732b7730	273	result = in0 & in1;
879a3986 CL	274	flag_c = shifter_carry;
	275	setres = 1'b1;
	276	end
	277	`ALU_EOR: begin
732b7730	278	result = in0 ^ in1;
879a3986 CL	279	flag_c = shifter_carry;
	280	setres = 1'b1;
	281	end
	282	`ALU_SUB: begin
732b7730	283	{flag_c, result} = diff;
793482e9	284	flag_v = diff_v;
879a3986 CL	285	setres = 1'b1;
	286	end
	287	`ALU_RSB: begin
732b7730	288	{flag_c, result} = rdiff;
793482e9	289	flag_v = rdiff_v;
879a3986 CL	290	setres = 1'b1;
	291	end
	292	`ALU_ADD: begin
732b7730	293	{flag_c, result} = sum;
793482e9	294	flag_v = sum_v;
879a3986 CL	295	setres = 1'b1;
	296	end
	297	`ALU_ADC: begin
732b7730	298	{flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
793482e9	299	flag_v = sum_v \| (~sum[31] & result[31]);
879a3986 CL	300	setres = 1'b1;
	301	end
	302	`ALU_SBC: begin
732b7730	303	{flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
793482e9	304	flag_v = diff_v \| (diff[31] & ~result[31]);
879a3986 CL	305	setres = 1'b1;
	306	end
	307	`ALU_RSC: begin
732b7730	308	{flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
793482e9	309	flag_v = rdiff_v \| (rdiff[31] & ~result[31]);
879a3986 CL	310	setres = 1'b1;
	311	end
	312	`ALU_TST: begin
732b7730	313	result = in0 & in1;
879a3986 CL	314	flag_c = shifter_carry;
	315	setres = 1'b0;
	316	end
	317	`ALU_TEQ: begin
732b7730	318	result = in0 ^ in1;
879a3986 CL	319	flag_c = shifter_carry;
	320	setres = 1'b0;
	321	end
	322	`ALU_CMP: begin
732b7730	323	{flag_c, result} = diff;
793482e9	324	flag_v = diff_v;
879a3986 CL	325	setres = 1'b0;
	326	end
	327	`ALU_CMN: begin
732b7730	328	{flag_c, result} = sum;
793482e9	329	flag_v = sum_v;
879a3986 CL	330	setres = 1'b0;
	331	end
	332	`ALU_ORR: begin
732b7730	333	result = in0 \| in1;
879a3986 CL	334	flag_c = shifter_carry;
	335	setres = 1'b1;
	336	end
	337	`ALU_MOV: begin
732b7730	338	result = in1;
879a3986 CL	339	flag_c = shifter_carry;
	340	setres = 1'b1;
	341	end
	342	`ALU_BIC: begin
732b7730	343	result = in0 & (~in1);
879a3986 CL	344	flag_c = shifter_carry;
	345	setres = 1'b1;
	346	end
	347	`ALU_MVN: begin
732b7730	348	result = ~in1;
879a3986 CL	349	flag_c = shifter_carry;
	350	setres = 1'b1;
	351	end
	352	endcase
732b7730 JW	353
	354	flag_z = (result == 0);
	355	flag_n = result[31];
	356
	357	cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
879a3986	358	end
879a3986	359	endmodule