static struct nic nic;
static txdesc_t txdesc;
-static rxdesc_t rxdesc;
-
#define _outl(v,a) outl((a),(v))
#define _outw(v,a) outw((a),(v))
*** size - size of the non-header part of the packet that needs transmitted;
*** pkt - the pointer to the packet data itself.
***/
-static void
-a3c90x_transmit(struct pbuf *p)
+static void _transmit(struct pbuf *p)
{
unsigned char status;
static struct pbuf *oldpbuf = NULL;
if (oldpbuf)
{
+ int i = 0;
while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE) && oneshot_running())
- ;
+ i++;
+ if (i)
+ outputf("3c90x: had to wait %d loops to tx", i);
if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE))
{
outputf("3c90x: tx timeout? txstat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b));
/** set notification for transmission completion (bit 15) **/
txdesc.hdr = (len) | 0x8000;
- outputf("3c90x: Sending %d byte %d seg packet", len, n);
-
/** Send the packet **/
outl(INF_3C90X.IOAddr + regDnListPtr_l, v2p(&txdesc));
_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */);
#endif
}
+/***************************** Receive routines *****************************/
+#define MAX_RECV_SIZE 1536
+#define RECV_BUFS 4
+static rxdesc_t rxdescs[RECV_BUFS];
+static struct pbuf *pbufs[RECV_BUFS] = {0,};
-/*** a3c90x_poll: exported routine that waits for a certain length of time
- *** for a packet, and if it sees none, returns 0. This routine should
- *** copy the packet to nic->packet if it gets a packet and set the size
- *** in nic->packetlen. Return 1 if a packet was found.
- ***/
-static struct pbuf * a3c90x_poll(struct nic *nic)
+/* rxcons is the pointer to the receive descriptor that the ethernet card will
+ * write into next.
+ */
+static int rxcons = 0;
+
+/* rxprod is the pointer to the receive descriptor that the driver will
+ * allocate next.
+ */
+static int rxprod = 0;
+
+/* _recv_prepare fills the 3c90x's ring buffer with fresh pbufs from lwIP.
+ * The upload engine need not be stalled.
+ */
+static void _recv_prepare(struct nic *nic)
{
- int i, errcode;
- struct pbuf *p, *q;
-
- /* Upload engine acks rxComplete for us later. */
- if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & 0x0010))
- return NULL;
-
- p = pbuf_alloc(PBUF_RAW, 1536 /* XXX magic Max len */, PBUF_POOL);
- if (!p)
+ int oldprod;
+
+ oldprod = rxprod;
+ while ((rxprod != rxcons) || !pbufs[rxprod])
{
- outputf("3c90x: out of memory for packet?");
- return NULL;
+ int i;
+ struct pbuf *p;
+
+ if (!pbufs[rxprod])
+ pbufs[rxprod] = p = pbuf_alloc(PBUF_RAW, MAX_RECV_SIZE, PBUF_POOL);
+ else {
+ outputf("WARNING: 3c90x has pbuf in slot %d", rxprod);
+ p = pbufs[rxprod];
+ }
+
+ if (!p)
+ {
+ outputf("3c90x: out of memory for rx pbuf?");
+ break;
+ }
+
+ rxdescs[rxprod].status = 0;
+ rxdescs[rxprod].next = 0;
+ for (i = 0; p; p = p->next, i++)
+ {
+ rxdescs[rxprod].segments[i].addr = v2p(p->payload);
+ rxdescs[rxprod].segments[i].len = p->len | (p->next ? 0 : (1 << 31));
+ }
+
+ /* Hook in the new one after and only after it's been fully set up. */
+ rxdescs[(rxprod + RECV_BUFS - 1) % RECV_BUFS].next = v2p(&(rxdescs[rxprod]));
+ rxprod = (rxprod + 1) % RECV_BUFS;
}
-
- /* We don't need to acknowledge rxComplete -- the upload engine does
- * it for us.
- */
-
- /** Build the up-load descriptor **/
- rxdesc.next = 0;
- rxdesc.status = 0;
- for (i = 0, q = p; q; q = q->next, i++)
+
+ if (inl(INF_3C90X.IOAddr + regUpListPtr_l) == 0 && pbufs[oldprod]) /* Ran out of shit, and got new shit? */
{
- rxdesc.segments[i].addr = v2p(q->payload);
- rxdesc.segments[i].len = q->len | (q->next ? 0 : (1 << 31));
+ outl(INF_3C90X.IOAddr + regUpListPtr_l, v2p(&rxdescs[oldprod]));
+ outputf("3c90x: WARNING: Ran out of rx slots");
}
+
+}
- /** Submit the upload descriptor to the NIC **/
- outl(INF_3C90X.IOAddr + regUpListPtr_l, v2p(&rxdesc));
-
- /** Wait for upload completion (upComplete(15) or upError (14)) **/
- for (i = 0; i < 40000; i++) /* XXX What is this shit?! */
- ;
- while((rxdesc.status & ((1<<14) | (1<<15))) == 0)
- for (i = 0; i < 40000; i++)
- ;
-
- /** Check for Error (else we have good packet) **/
- if (rxdesc.status & (1<<14))
+/* _recv polls the ring buffer to see if any packets are available. If any
+ * are, then eth_recv is called for each available. _recv returns how many
+ * packets it received successfully. Whether _recv got any packets or not,
+ * _recv does not block, and reinitializes the ring buffer with fresh pbufs.
+ */
+static int _recv(struct nic *nic)
+{
+ int errcode, n = 0;
+ struct pbuf *p;
+
+ /* Nothing to do? */
+ while ((rxdescs[rxcons].status & ((1<<14) | (1<<15))) != 0)
{
- errcode = rxdesc.status;
- if (errcode & (1<<16))
- outputf("3C90X: Rx Overrun (%hX)",errcode>>16);
- else if (errcode & (1<<17))
- outputf("3C90X: Runt Frame (%hX)",errcode>>16);
- else if (errcode & (1<<18))
- outputf("3C90X: Alignment Error (%hX)",errcode>>16);
- else if (errcode & (1<<19))
- outputf("3C90X: CRC Error (%hX)",errcode>>16);
- else if (errcode & (1<<20))
- outputf("3C90X: Oversized Frame (%hX)",errcode>>16);
- else
- outputf("3C90X: Packet error (%hX)",errcode>>16);
- return NULL;
+ /** Check for Error (else we have good packet) **/
+ if (rxdescs[rxcons].status & (1<<14))
+ {
+ errcode = rxdescs[rxcons].status;
+ if (errcode & (1<<16))
+ outputf("3C90X: Rx Overrun (%hX)",errcode>>16);
+ else if (errcode & (1<<17))
+ outputf("3C90X: Runt Frame (%hX)",errcode>>16);
+ else if (errcode & (1<<18))
+ outputf("3C90X: Alignment Error (%hX)",errcode>>16);
+ else if (errcode & (1<<19))
+ outputf("3C90X: CRC Error (%hX)",errcode>>16);
+ else if (errcode & (1<<20))
+ outputf("3C90X: Oversized Frame (%hX)",errcode>>16);
+ else
+ outputf("3C90X: Packet error (%hX)",errcode>>16);
+
+ p = NULL;
+ pbuf_free(pbufs[rxcons]); /* Bounce the old one before setting it up again. */
+ } else {
+ p = pbufs[rxcons];
+ pbuf_realloc(p, rxdescs[rxcons].status & 0x1FFF); /* Resize the packet to how large it actually is. */
+ }
+
+ pbufs[rxcons] = NULL;
+ rxdescs[rxcons].status = 0;
+ rxcons = (rxcons + 1) % RECV_BUFS;
+
+ if (p)
+ {
+ eth_recv(nic, p);
+ n++;
+ }
}
- /* Resize the packet to how large it actually is. */
- pbuf_realloc(p, rxdesc.status & 0x1FFF);
-
- return p;
+ _recv_prepare(nic); /* Light the NIC up again. */
+ return n;
}
/*** a3c90x_disable: exported routine to disable the card. What's this for?
_outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2);
_outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4);
- /** Fill in our entry in the etherboot arp table **/
-/* XXX ? for lwip?
- for(i=0;i<ETH_ALEN;i++)
- nic.node_addr[i] = (eeprom[HWADDR_OFFSET + i/2] >> (8*((i&1)^1))) & 0xff;
-*/
-
/** Read the media options register, print a message and set default
** xcvr.
**
linktype = 0x0008;
if (mopt & 0x01)
{
- outputf("%s100Base-T4",(c++)?", ":"");
+ outputf(" 100Base-T4");
linktype = 0x0006;
}
if (mopt & 0x04)
{
- outputf("%s100Base-FX",(c++)?", ":"");
+ outputf(" 100Base-FX");
linktype = 0x0005;
}
if (mopt & 0x10)
{
- outputf("%s10Base-2",(c++)?", ":"");
+ outputf(" 10Base-2");
linktype = 0x0003;
}
if (mopt & 0x20)
{
- outputf("%sAUI",(c++)?", ":"");
+ outputf(" AUI");
linktype = 0x0001;
}
if (mopt & 0x40)
{
- outputf("%sMII",(c++)?", ":"");
+ outputf(" MII");
linktype = 0x0006;
}
if ((mopt & 0xA) == 0xA)
{
- outputf("%s10Base-T / 100Base-TX",(c++)?", ":"");
+ outputf(" 10Base-T / 100Base-TX");
linktype = 0x0008;
}
else if ((mopt & 0xA) == 0x2)
{
- outputf("%s100Base-TX",(c++)?", ":"");
+ outputf(" 100Base-TX");
linktype = 0x0008;
}
else if ((mopt & 0xA) == 0x8)
{
- outputf("%s10Base-T",(c++)?", ":"");
+ outputf(" 10Base-T");
linktype = 0x0008;
}
- outputf(".");
/** Determine transceiver type to use, depending on value stored in
** eeprom 0x16
/** Set the RX filter = receive only individual pkts & multicast & bcast. **/
_issue_command(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04);
+
+ /* Stick some packets in the queue. */
+ _recv_prepare(&nic);
+
+ /* And light up the RX engine. */
_issue_command(INF_3C90X.IOAddr, cmdRxEnable, 0);
-
/**
** set Indication and Interrupt flags , acknowledge any IRQ's
**/
_issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661);
/* * Set our exported functions **/
- nic.recv = a3c90x_poll;
- nic.transmit = a3c90x_transmit;
+ nic.recv = _recv;
+ nic.transmit = _transmit;
memcpy(nic.hwaddr, INF_3C90X.HWAddr, 6);
eth_register(&nic);
git.joshuawise.com / netwatch.git / blobdiff