Don't clear BSS if we don't need to.

[netwatch.git] / aseg / aseg.asm

diff --git a/aseg/aseg.asm b/aseg/aseg.asm
index 51a28111986652c96ce4ca90daed569a721bf123..244cafc359f3ae87669952727d914f2d43b9f0ed 100644 (file)
--- a/aseg/aseg.asm
+++ b/aseg/aseg.asm
@@ -1,48 +1,33 @@
-       org 0x0
+       org 0xA8000
 [bits 16]
 entry:
-;      mov al, 0x01            ; Say where we are.
-;      out 0x80, al
        mov ax, 0xA800
        mov ds, ax              ; Take us out of flat unreal mode, and
        mov es, ax              ; put us in true real mode.
        mov fs, ax
        mov gs, ax
        mov ss, ax
-       jmp 0xA800:entry2               ; Long jump to a correct cs.
+       jmp 0xA800:(entry2-0xA8000)     ; Long jump to a correct cs.
 entry2:
-;      mov al, 0x02
-;      out 0x80, al
-       lgdt [gdtr]                     ; Set up a new GDT.
+       lgdt [(gdtr-0xA8000)]           ; Set up a new GDT.
        mov eax, 0x1
        mov cr0, eax                    ; ... and enter pmode!
-       mov al, 0x03                    ; Say we got here.
-       out 0x80, al
-       jmp long 0x10:(continue+0xA8000)        ; Now longjmp into the new code.
+       jmp long 0x10:continue          ; Now longjmp into the new code.
 [bits 32]
 continue:
-;      mov al, 0x04                    ; Now we're in protected mode.
-;      out 0x80, al
-       
        mov ax, 0x08                    ; Set up segment selectors.
        mov ds, ax
        mov es, ax
        mov fs, ax
        mov gs, ax
        mov ss, ax
-       mov esp, 0x1fffffff
+       mov esp, [dataptr]
 
-;      mov al, 0x05
+;      mov al, [cstat]
+;      add al, 1
 ;      out 0x80, al
-
-       mov al, [(cstat + 0xA8000)]
-       add al, 1
-       out 0x80, al
-       mov [(cstat + 0xA8000)], al
+;      mov [cstat], al
        
-       mov eax, 0x11223344
-       mov dword [(status + 0xA8000)], eax
-
        mov dx, 0xCF8                   ; save off the old config value
        in dword eax, dx
        mov [esp-4], eax
@@ -73,38 +58,50 @@ continue:
        shl eax, 1
        add eax, 0xB8000                ; yay
        mov byte [eax+0], '1'
-       mov byte [eax+1], 0xA0
+       mov byte [eax+1], 0x1F
        mov byte [eax+2], '5'
-       mov byte [eax+3], 0xA0
+       mov byte [eax+3], 0x1F
        mov byte [eax+4], '-'
-       mov byte [eax+5], 0xA0
+       mov byte [eax+5], 0x1F
        mov byte [eax+6], '4'
-       mov byte [eax+7], 0xA0
+       mov byte [eax+7], 0x1F
        mov byte [eax+8], '1'
-       mov byte [eax+9], 0xA0
+       mov byte [eax+9], 0x1F
        mov byte [eax+10], '2'
-       mov byte [eax+11], 0xA0
+       mov byte [eax+11], 0x1F
        
-       mov dx, 0x3D4
+       mov dx, 0x3D4                   ; restore the old stuff
        mov al, [esp-6]
        out dx, al
-       
 
        mov dx, 0xCFC                   ; restore smramc
        mov al, [esp-5]
        out dx, al
 
-       mov dx, 0xCF8                   ; restore the old config value
+       mov dx, 0xCF8                   ; restore the old PCI config value
        mov eax, [esp-4]
        out dx, eax
 
+       mov al, [needclear]
+       cmp al, 0
+       jz noclear
+       mov al, 0                       ; clear BSS
+       mov edi, [dataptr+4]
+       mov ecx, [dataptr+8]
+       rep stosb
+       mov [needclear], al
+       
+noclear:
+       mov eax, [dataptr+12]           ; jump into C
+       call eax
+
        mov al, 0x40                    ; ack the periodic IRQ
        mov dx, 0x834
        out dx, al
        
-       mov dx, 0x830
+       mov dx, 0x830                   ; now ack the SMI itself
        in al, dx
-       or al, 0x02                     ; now ack the SMI itself
+       or al, 0x02
        and al, 0xBF
        out dx, al
        or al, 0x40
@@ -112,10 +109,13 @@ continue:
 
        rsm                             ; and leave SMM
 
+needclear:
+       db 0x01
+
        align 0x4
 gdtr:
        db 0x27, 0x00
-       dd (gdt + 0xA8000)
+       dd gdt
        align 0x4
 gdt:
        db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
@@ -123,8 +123,12 @@ gdt:
        db 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x9B, 0xCF, 0x00       ; code segment
        db 0xFF, 0xFF, 0x00, 0x80, 0x0A, 0x9B, 0xCF, 0x00       ; code segment for trampoline
 
-TIMES   512-($-$$) DB 0
-status:
-       dd 0xAA55AA55
 cstat:
        db 0x00
+
+TIMES   512-($-$$) DB 0
+dataptr:
+       ; 4 bytes of stack top
+       ; 4 bytes of BSS start
+       ; 4 bytes of BSS length
+       ; 4 bytes of C entry point
\ No newline at end of file