#include <pci-bother.h>
#include <minilib.h>
#include <output.h>
+#include <paging.h>
#define XCVR_MAGIC (0x5A00)
/** any single transmission fails after 16 collisions or other errors
** this is the number of times to retry the transmission -- this should
** be plenty
**/
-#define XMIT_RETRIES 1
+#define XMIT_RETRIES 5
/*** Register definitions for the 3c905 ***/
enum Registers
if (retries != 0)
outputf("3c90x: retrying packet send (%d)", retries);
- /** Stall the download engine **/
- outputf("3c90x: stalling transmit engine");
_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 2 /* Stall download */);
hdr.type = htons(proto);
INF_3C90X.TransmitDPD.DataLength = size + (1<<31);
/** Send the packet **/
- outputf("3c90x: pointing card at %08x", virt_to_bus(&(INF_3C90X.TransmitDPD)));
outl(INF_3C90X.IOAddr + regDnListPtr_l, virt_to_bus(&(INF_3C90X.TransmitDPD)));
-
- outputf("3c90x: unstalling transmit engine");
_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */);
- outputf("3c90x: waiting for download pointer");
oneshot_start_ms(100);
while((inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) && oneshot_running())
;
if (!oneshot_running())
- {
outputf("3c90x: Download engine pointer timeout");
- }
- outputf("3c90x: waiting for TXCOMPLETE");
oneshot_start_ms(10); /* Give it 10 ms */
while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE) && oneshot_running())
;
if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE))
{
- outputf("3c90x: tx timeout? stat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b));
- _issue_command(INF_3C90X.IOAddr, cmdTxReset, 0);
- if (! INF_3C90X.isBrev)
- _outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b);
- _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0);
- _issue_command(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0);
- _issue_command(INF_3C90X.IOAddr, cmdSetIndicationEnable, 0x0014);
- _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661);
+ outputf("3c90x: tx timeout? txstat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b));
+ outputf("3c90x: Gen sts %04x", inw(INF_3C90X.IOAddr + regCommandIntStatus_w));
continue;
}
status = inb(INF_3C90X.IOAddr + regTxStatus_b);
outb(INF_3C90X.IOAddr + regTxStatus_b, 0x00);
- _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, INT_TXCOMPLETE);
-
/** successful completion (sans "interrupt Requested" bit) **/
if ((status & 0xbf) == 0x80)
return;
pci_read16(pci->bus, pci->dev, pci->fn, 0xE0) & ~0x3);
outputf("3c90x: Picked I/O address %04x", ioaddr);
-// pci_bother_add(pci);
+ pci_bother_add(pci);
nic.ioaddr = ioaddr & ~3;
nic.irqno = 0;