Add an instruction tester to the test ROM.
authorJoshua Wise <joshua@rebirth.joshuawise.com>
Thu, 3 Apr 2008 09:38:14 +0000 (05:38 -0400)
committerJoshua Wise <joshua@rebirth.joshuawise.com>
Thu, 3 Apr 2008 09:38:14 +0000 (05:38 -0400)
FPGABoy.ise
GBZ80Core.v
rom.asm

index 06b8ca4..7374a59 100644 (file)
Binary files a/FPGABoy.ise and b/FPGABoy.ise differ
index 0f0496e..e125225 100644 (file)
@@ -289,7 +289,7 @@ module GBZ80Core(
                                                `INSN_stack_HL: wdata <= registers[`REG_L];
                                                endcase
                                        end
-                               2:      begin /* TWIDDLE OUR FUCKING THUMBS! */ end
+                               2:      begin /* Twiddle thumbs. */ end
                                3:      begin
                                                `EXEC_NEWCYCLE;
                                                `EXEC_INC_PC;
diff --git a/rom.asm b/rom.asm
index 640c2b0..02f095b 100644 (file)
--- a/rom.asm
+++ b/rom.asm
@@ -1,25 +1,32 @@
        SECTION "a",HOME
+
 main:
-       ld c, $51
+       ld c, $51       ; Note that we are alive.
        ld a, $FF
        ld [c],a
-       ld sp,$DFFF
 
-       ld hl,text
+       ld sp, $DFFF
+
+       ld hl, signon
        call puts
        
        call memtest
+
+       call insntest
+
        call waitsw
+
        jp main
 
-text:
+signon:
        db $0D,$0A,$1B,"[1mFPGABoy Diagnostic ROM",$1B,"[0m",$0D,$0A,0
 
+; Memory tester: writes h ^ l to all addresses from C000 to DF80.
 memtest:
        ld hl,memteststr
        call puts
        
-       ld hl, $C000
+       ld hl, $C000            ; Write loop
 .wr:
        ld a,h
        xor l
@@ -31,7 +38,7 @@ memtest:
        cp l
        jp nz, .wr
 
-       ld hl, $C000
+       ld hl, $C000            ; Read loop
 .rd:
        ld a,h
        xor l
@@ -47,11 +54,11 @@ memtest:
        cp l
        jp nz, .rd
        
-       ld hl, testokstr
+       ld hl, testokstr        ; Say we're OK
        call puts
        ret
-.memfail:
-       @ decrement hl the easy way
+.memfail:                      ; Say we failed (sadface)
+       ; decrement hl the easy way
        ld a,[hld]
        push hl
        ld hl, failatstr
@@ -66,14 +73,14 @@ memtest:
        ld a, $0D
        call putc
        ret
-
 memteststr:
        db "Testing memory from $C000 to $DF80...",0
 testokstr:
        db " OK!",$0D,$0A,0
 failatstr:
        db " Test failed at $",0
-puthex:
+
+puthex:                                ; Put two hex nibbles to the serial console.
        push af
        rra
        rra
@@ -92,6 +99,7 @@ puthex:
        call putc
        ret
 
+; Wait for switches to be flipped on and off again.
 waitsw:
        ld hl,waitswstr
        call puts
@@ -115,6 +123,74 @@ waitsw:
 waitswstr:
        db "Diagnostic ROM complete; flip switches to nonzero and then to zero to reset.",$0D,$0A,0
 
+; Core instruction basic acceptance tests.
+insntest:
+       ld hl, .insnteststr
+       call puts
+       
+       ; Test PUSH and POP.
+       ld b, $12
+       ld c, $34
+       ld d, $56
+       ld e, $78
+       push bc
+       pop de
+       ld hl, .pushpopfail
+       ld a, d
+       cp b
+       jp nz,.fail
+       ld a, e
+       cp c
+       jp nz,.fail
+       
+       ; Test ALU (HL).
+       ld hl, .ff
+       ld a, $FF
+       xor [hl]
+       ld hl, .xorhlfail
+       jp nz, .fail
+       
+       ; Test CP.
+       ld hl, .cpfail
+       ld a, $10
+       ld b, $20
+       cp b
+       jp nc,.fail
+       ld a, $20
+       ld b, $10
+       cp b
+       jp c,.fail
+       
+       ; Test CPL
+       ld hl, .cplfail
+       ld a, $55
+       ld b, $AA
+       cpl
+       cp b
+       jp nz,.fail
+       
+       ld hl, .ok
+       call puts
+       ret
+.fail:
+       call puts
+       ret
+.insnteststr:
+       db "Testing instructions... ",$0
+.pushpopfail:
+       db "PUSH/POP test failed.",$0D,$0A,0
+.ff:
+       db $FF
+.xorhlfail:
+       db "XOR [HL] test failed.",$0D,$0A,0
+.cpfail:
+       db "CP test failed.",$0D,$0A,0
+.cplfail:
+       db "CPL test failed.",$0D,$0A,0
+.ok:
+       db "OK!",$0D,$0A,0
+
+; Serial port manipulation functions.
 putc:
        push af
        ld b, 0
This page took 0.030986 seconds and 4 git commands to generate.