[fpgaboy.git] / LCDC.v

`define ADDR_LCDC	16'hFF40
`define ADDR_STAT	16'hFF41
`define ADDR_SCY	16'hFF42
`define ADDR_SCX	16'hFF43
`define ADDR_LY		16'hFF44
`define ADDR_LYC	16'hFF45
`define ADDR_DMA	16'hFF46
`define ADDR_BGP	16'hFF47
`define ADDR_OBP0	16'hFF48
`define ADDR_OBP1	16'hFF49
`define ADDR_WY		16'hFF4A
`define ADDR_WX		16'hFF4B

module LCDC(
	input [15:0] addr,
	inout [7:0] data,
	input clk,	// 8MHz clock
	input wr, rd,
	output wire lcdcirq,
	output wire vblankirq,
	output wire lcdclk, lcdvs, lcdhs,
	output reg [2:0] lcdr, lcdg, output reg [1:0] lcdb);
	
	/***** Bus latches *****/
	reg rdlatch = 0;
	reg [15:0] addrlatch = 0;
	
	/***** Needed prototypes *****/
	wire [1:0] pixdata;
	
	/***** Internal clock that is stable and does not depend on CPU in single/double clock mode *****/
	reg clk4 = 0;
	always @(posedge clk)
		clk4 <= ~clk4;
	
	/***** LCD control registers *****/
	reg [7:0] rLCDC = 8'h00;
	reg [7:0] rSTAT = 8'h00;
	reg [7:0] rSCY = 8'b00;
	reg [7:0] rSCX = 8'b00;
	reg [7:0] rLYC = 8'b00;
	reg [7:0] rDMA = 8'b00;
	reg [7:0] rBGP = 8'b00;
	reg [7:0] rOBP0 = 8'b00;
	reg [7:0] rOBP1 = 8'b00;
	reg [7:0] rWY = 8'b00;
	reg [7:0] rWX = 8'b00;
	
	/***** Sync generation *****/
	
	/* A complete cycle takes 456 clocks.
	 * VBlank lasts 4560 clocks (10 scanlines) -- LY = 144 - 153.
	 *
	 * Modes: 0 -> in hblank and OAM/VRAM available - present 207 clks
	 *        1 -> in vblank and OAM/VRAM available
	 *        2 -> OAM in use - present 86 clks
	 *        3 -> OAM/VRAM in use - present 163 clks
	 * So, X = 0~162 is HActive,
	 * X = 163-369 is HBlank,
	 * X = 370-455 is HWhirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.
	 * [02:15:10] <Judge_> LY is updated near the 0 -> 2 transition
	 * [02:15:38] <Judge_> it seems to be updated internally first before it is visible in the LY register itself
	 * [02:15:40] <Judge_> some kind of delay
	 * [02:16:19] <Judge_> iirc it is updated about 4 cycles prior to mode 2
	 */
	reg [8:0] posx = 9'h000;
	reg [7:0] posy = 8'h00;
	
	wire vraminuse = (posx < 163) && (posy < 144) && rLCDC[7];
	wire oaminuse = (posx > 369) && (posy < 144) && rLCDC[7];
	
	wire display = (posx > 2) && (posx < 163) && (posy < 144);
	
	wire [1:0] mode = (posy < 144) ?
				(vraminuse ? 2'b11 :
				 oaminuse ? 2'b10 :
				 2'b00)
				: 2'b01;
	
	wire [7:0] vxpos = rSCX + posx - 3;
	wire [7:0] vypos = rSCY + posy;
	
	assign lcdvs = (posy == 153) && (posx == 2) && rLCDC[7];
	assign lcdhs = (posx == 2) && rLCDC[7];
	assign lcdclk = clk4;
	
	wire [2:0] lcdr_ = display ? {pixdata[1] ? 3'b111 : 3'b000} : 3'b000;
	wire [2:0] lcdg_ = display ? {pixdata[0] ? 3'b111 : 3'b000} : 3'b000;
	wire [1:0] lcdb_ = display ? {(vypos < 8 || vxpos < 8) ? 2'b11 : 2'b00} : 2'b00;
	
	reg mode00irq = 0, mode01irq = 0, mode10irq = 0, lycirq = 0;
	assign lcdcirq = (rSTAT[3] & mode00irq) | (rSTAT[4] & mode01irq) | (rSTAT[5] & mode10irq) | (rSTAT[6] & lycirq);
	assign vblankirq = (posx == 0 && posy == 153);
	
	always @(posedge clk4)
	begin
		if (posx == 455) begin
			posx <= 0;
			if (posy == 153) begin
				posy <= 0;
				if (0 == rLYC)
					lycirq <= 1;
			end else begin
				posy <= posy + 1;
				/* Check for vblank and generate an IRQ if needed. */
				if (posy == 143) begin 
					mode01irq <= 1;
				end
				if ((posy + 1) == rLYC)
					lycirq <= 1;
				
			end
		end else begin
			posx <= posx + 1;
			if (posx == 165)
				mode00irq <= 1;
			else if (posx == 373)
				mode10irq <= 1;
			else begin
				mode00irq <= 0;
				mode01irq <= 0;
				mode10irq <= 0;
			end
			lycirq <= 0;
		end
		
		lcdr <= lcdr_;
		lcdg <= lcdg_;
		lcdb <= lcdb_;
	end
	
	/***** Video RAM *****/
	/* Base is 0x8000
	 *
	 * Tile data from 8000-8FFF or 8800-97FF
	 * Background tile maps 9800-9BFF or 9C00-9FFF
	 */
	reg [7:0] tiledatahigh [6143:0];
	reg [7:0] tiledatalow [6143:0];
	reg [7:0] bgmap1 [1023:0];
	reg [7:0] bgmap2 [1023:0];
	
	// Upper five bits are Y coord, lower five bits are X coord
	// The new tile number is loaded when vxpos[2:0] is 3'b110
	// The new tile data is loaded when vxpos[2:0] is 3'b111
	// The new tile data is latched and ready when vxpos[2:0] is 3'b000!
	wire [7:0] vxpos_ = vxpos + 1;
	wire [9:0] bgmapaddr = {vypos[7:3], vxpos_[7:3]};
	reg [7:0] tileno1;
	reg [7:0] tileno2;
	wire [7:0] tileno = rLCDC[3] ? tileno2 : tileno1;
	wire [11:0] tileaddr =
		{(rLCDC[4] ? {1'b0,tileno} : (9'b100000000 + {tileno[7],tileno})),
		vypos[2:0]};
	reg [7:0] tilehigh, tilelow;
	wire [1:0] prepal = {tilehigh[7-vxpos[2:0]], tilelow[7-vxpos[2:0]]};
	assign pixdata = 2'b11-{rBGP[{prepal,1'b1}],rBGP[{prepal,1'b0}]};
	
	wire decode_tiledata = (addr >= 16'h8000) && (addr <= 16'h97FF);
	wire decode_bgmap1 = (addr >= 16'h9800) && (addr <= 16'h9BFF);
	wire decode_bgmap2 = (addr >= 16'h9C00) && (addr <= 16'h9FFF);

	wire [9:0] bgmapaddr_in = vraminuse ? bgmapaddr : addr[9:0];
	wire [11:0] tileaddr_in = vraminuse ? tileaddr : addr[12:1];
	
	always @(posedge clk)
	begin
		if ((vraminuse && ((posx == 2) || (vxpos[2:0] == 3'b111))) || decode_bgmap1) begin
			tileno1 <= bgmap1[bgmapaddr_in];
			if (wr && decode_bgmap1 && ~vraminuse)
				bgmap1[bgmapaddr_in] <= data;
		end
		if ((vraminuse && ((posx == 2) || (vxpos[2:0] == 3'b111))) || decode_bgmap2) begin
			tileno2 <= bgmap2[bgmapaddr_in];
			if (wr && decode_bgmap2 && ~vraminuse)
				bgmap2[bgmapaddr_in] <= data;
		end
		if ((vraminuse && ((posx == 3) || (vxpos[2:0] == 3'b000))) || decode_tiledata) begin
			tilehigh <= tiledatahigh[tileaddr_in];
			tilelow <= tiledatalow[tileaddr_in];
			if (wr && addr[0] && decode_tiledata && ~vraminuse)
				tiledatahigh[tileaddr_in] <= data;
			if (wr && ~addr[0] && decode_tiledata && ~vraminuse)
				tiledatalow[tileaddr_in] <= data;
		end
	end
  
	/***** Bus interface *****/
	assign data = rdlatch ?
			((addrlatch == `ADDR_LCDC) ? rLCDC :
			 (addrlatch == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
			 (addrlatch == `ADDR_SCY) ? rSCY :
			 (addrlatch == `ADDR_SCX) ? rSCX :
			 (addrlatch == `ADDR_LY) ? posy :
			 (addrlatch == `ADDR_LYC) ? rLYC :
			 (addrlatch == `ADDR_BGP) ? rBGP :
			 (addrlatch == `ADDR_OBP0) ? rOBP0 :
			 (addrlatch == `ADDR_OBP1) ? rOBP1 :
			 (addrlatch == `ADDR_WY) ? rWY :
			 (addrlatch == `ADDR_WX) ? rWX :
			 (decode_tiledata && addrlatch[0]) ? tilehigh :
			 (decode_tiledata && ~addrlatch[0]) ? tilelow :
			 (decode_bgmap1) ? tileno :
			 8'bzzzzzzzz) :
		8'bzzzzzzzz;
  
	always @(posedge clk)
	begin
		rdlatch <= rd;
		addrlatch <= addr;
		if (wr)
			case (addr)
			`ADDR_LCDC:	rLCDC <= data;
			`ADDR_STAT:	rSTAT <= {data[7:2],rSTAT[1:0]};
			`ADDR_SCY:	rSCY <= data;
			`ADDR_SCX:	rSCX <= data;
			`ADDR_LYC:	rLYC <= data;
			`ADDR_DMA:	rDMA <= data;
			`ADDR_BGP:	rBGP <= data;
			`ADDR_OBP0:	rOBP0 <= data;
			`ADDR_OBP1:	rOBP1 <= data;
			`ADDR_WY:	rWY <= data;
			`ADDR_WX:	rWX <= data;
			endcase
	end
endmodule
Commit	Line	Data
537e1f83 JW	1	`define ADDR_LCDC 16'hFF40
	2	`define ADDR_STAT 16'hFF41
	3	`define ADDR_SCY 16'hFF42
	4	`define ADDR_SCX 16'hFF43
	5	`define ADDR_LY 16'hFF44
	6	`define ADDR_LYC 16'hFF45
	7	`define ADDR_DMA 16'hFF46
	8	`define ADDR_BGP 16'hFF47
	9	`define ADDR_OBP0 16'hFF48
	10	`define ADDR_OBP1 16'hFF49
	11	`define ADDR_WY 16'hFF4A
	12	`define ADDR_WX 16'hFF4B
	13
	14	module LCDC(
	15	input [15:0] addr,
	16	inout [7:0] data,
	17	input clk, // 8MHz clock
	18	input wr, rd,
00573fd5 JW	19	output wire lcdcirq,
00573fd5 JW	20	output wire vblankirq,
fe3dc890	21	output wire lcdclk, lcdvs, lcdhs,
ec727403	22	output reg [2:0] lcdr, lcdg, output reg [1:0] lcdb);
537e1f83	23
a8f4468d JW	24	/*** Bus latches ***/
	25	reg rdlatch = 0;
	26	reg [15:0] addrlatch = 0;
	27
39a68cde JW	28	/*** Needed prototypes ***/
	29	wire [1:0] pixdata;
	30
537e1f83 JW	31	/*** Internal clock that is stable and does not depend on CPU in single/double clock mode ***/
	32	reg clk4 = 0;
	33	always @(posedge clk)
2854e399	34	clk4 <= ~clk4;
537e1f83	35
00573fd5	36	/*** LCD control registers ***/
a42afaa9	37	reg [7:0] rLCDC = 8'h00;
00573fd5 JW	38	reg [7:0] rSTAT = 8'h00;
	39	reg [7:0] rSCY = 8'b00;
	40	reg [7:0] rSCX = 8'b00;
	41	reg [7:0] rLYC = 8'b00;
	42	reg [7:0] rDMA = 8'b00;
	43	reg [7:0] rBGP = 8'b00;
	44	reg [7:0] rOBP0 = 8'b00;
	45	reg [7:0] rOBP1 = 8'b00;
	46	reg [7:0] rWY = 8'b00;
	47	reg [7:0] rWX = 8'b00;
	48
537e1f83 JW	49	/*** Sync generation ***/
	50
	51	/* A complete cycle takes 456 clocks.
	52	* VBlank lasts 4560 clocks (10 scanlines) -- LY = 144 - 153.
	53	*
	54	* Modes: 0 -> in hblank and OAM/VRAM available - present 207 clks
	55	* 1 -> in vblank and OAM/VRAM available
39a68cde JW	56	* 2 -> OAM in use - present 86 clks
	57	* 3 -> OAM/VRAM in use - present 163 clks
	58	* So, X = 0~162 is HActive,
	59	* X = 163-369 is HBlank,
	60	* X = 370-455 is HWhirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.
fe3dc890 JW	61	* [02:15:10] <Judge_> LY is updated near the 0 -> 2 transition
	62	* [02:15:38] <Judge_> it seems to be updated internally first before it is visible in the LY register itself
	63	* [02:15:40] <Judge_> some kind of delay
	64	* [02:16:19] <Judge_> iirc it is updated about 4 cycles prior to mode 2
537e1f83 JW	65	*/
	66	reg [8:0] posx = 9'h000;
	67	reg [7:0] posy = 8'h00;
39a68cde	68
a42afaa9 JW	69	wire vraminuse = (posx < 163) && (posy < 144) && rLCDC[7];
a42afaa9 JW	70	wire oaminuse = (posx > 369) && (posy < 144) && rLCDC[7];
39a68cde JW	71
	72	wire display = (posx > 2) && (posx < 163) && (posy < 144);
	73
537e1f83	74	wire [1:0] mode = (posy < 144) ?
39a68cde JW	75	(vraminuse ? 2'b11 :
	76	oaminuse ? 2'b10 :
	77	2'b00)
537e1f83 JW	78	: 2'b01;
537e1f83 JW	79
4d90f272 JW	80	wire [7:0] vxpos = rSCX + posx - 3;
	81	wire [7:0] vypos = rSCY + posy;
	82
a42afaa9 JW	83	assign lcdvs = (posy == 153) && (posx == 2) && rLCDC[7];
a42afaa9 JW	84	assign lcdhs = (posx == 2) && rLCDC[7];
f356a735	85	assign lcdclk = clk4;
ec727403 JW	86
	87	wire [2:0] lcdr_ = display ? {pixdata[1] ? 3'b111 : 3'b000} : 3'b000;
	88	wire [2:0] lcdg_ = display ? {pixdata[0] ? 3'b111 : 3'b000} : 3'b000;
	89	wire [1:0] lcdb_ = display ? {(vypos < 8 \|\| vxpos < 8) ? 2'b11 : 2'b00} : 2'b00;
00573fd5 JW	90
	91	reg mode00irq = 0, mode01irq = 0, mode10irq = 0, lycirq = 0;
	92	assign lcdcirq = (rSTAT[3] & mode00irq) \| (rSTAT[4] & mode01irq) \| (rSTAT[5] & mode10irq) \| (rSTAT[6] & lycirq);
	93	assign vblankirq = (posx == 0 && posy == 153);
	94
2854e399	95	always @(posedge clk4)
537e1f83 JW	96	begin
	97	if (posx == 455) begin
	98	posx <= 0;
00573fd5	99	if (posy == 153) begin
537e1f83	100	posy <= 0;
00573fd5 JW	101	if (0 == rLYC)
	102	lycirq <= 1;
	103	end else begin
537e1f83	104	posy <= posy + 1;
00573fd5 JW	105	/* Check for vblank and generate an IRQ if needed. */
	106	if (posy == 143) begin
	107	mode01irq <= 1;
	108	end
	109	if ((posy + 1) == rLYC)
	110	lycirq <= 1;
	111
	112	end
	113	end else begin
537e1f83	114	posx <= posx + 1;
00573fd5 JW	115	if (posx == 165)
	116	mode00irq <= 1;
	117	else if (posx == 373)
	118	mode10irq <= 1;
	119	else begin
	120	mode00irq <= 0;
	121	mode01irq <= 0;
	122	mode10irq <= 0;
	123	end
	124	lycirq <= 0;
	125	end
ec727403 JW	126
	127	lcdr <= lcdr_;
	128	lcdg <= lcdg_;
	129	lcdb <= lcdb_;
537e1f83	130	end
39a68cde JW	131
	132	/*** Video RAM ***/
	133	/* Base is 0x8000
	134	*
	135	* Tile data from 8000-8FFF or 8800-97FF
	136	* Background tile maps 9800-9BFF or 9C00-9FFF
	137	*/
207251ed JW	138	reg [7:0] tiledatahigh [6143:0];
207251ed JW	139	reg [7:0] tiledatalow [6143:0];
39a68cde JW	140	reg [7:0] bgmap1 [1023:0];
	141	reg [7:0] bgmap2 [1023:0];
	142
	143	// Upper five bits are Y coord, lower five bits are X coord
4d90f272 JW	144	// The new tile number is loaded when vxpos[2:0] is 3'b110
4d90f272 JW	145	// The new tile data is loaded when vxpos[2:0] is 3'b111
39a68cde	146	// The new tile data is latched and ready when vxpos[2:0] is 3'b000!
ec727403 JW	147	wire [7:0] vxpos_ = vxpos + 1;
ec727403 JW	148	wire [9:0] bgmapaddr = {vypos[7:3], vxpos_[7:3]};
207251ed JW	149	reg [7:0] tileno1;
	150	reg [7:0] tileno2;
	151	wire [7:0] tileno = rLCDC[3] ? tileno2 : tileno1;
	152	wire [11:0] tileaddr =
	153	{(rLCDC[4] ? {1'b0,tileno} : (9'b100000000 + {tileno[7],tileno})),
	154	vypos[2:0]};
4d90f272	155	reg [7:0] tilehigh, tilelow;
b4f3ac35	156	wire [1:0] prepal = {tilehigh[7-vxpos[2:0]], tilelow[7-vxpos[2:0]]};
6d070aee	157	assign pixdata = 2'b11-{rBGP[{prepal,1'b1}],rBGP[{prepal,1'b0}]};
39a68cde JW	158
	159	wire decode_tiledata = (addr >= 16'h8000) && (addr <= 16'h97FF);
	160	wire decode_bgmap1 = (addr >= 16'h9800) && (addr <= 16'h9BFF);
207251ed	161	wire decode_bgmap2 = (addr >= 16'h9C00) && (addr <= 16'h9FFF);
4d90f272 JW	162
	163	wire [9:0] bgmapaddr_in = vraminuse ? bgmapaddr : addr[9:0];
	164	wire [11:0] tileaddr_in = vraminuse ? tileaddr : addr[12:1];
39a68cde	165
8e2bb384	166	always @(posedge clk)
2854e399	167	begin
ec727403	168	if ((vraminuse && ((posx == 2) \|\| (vxpos[2:0] == 3'b111))) \|\| decode_bgmap1) begin
207251ed	169	tileno1 <= bgmap1[bgmapaddr_in];
80ecd2fe	170	if (wr && decode_bgmap1 && ~vraminuse)
4d90f272 JW	171	bgmap1[bgmapaddr_in] <= data;
4d90f272 JW	172	end
207251ed JW	173	if ((vraminuse && ((posx == 2) \|\| (vxpos[2:0] == 3'b111))) \|\| decode_bgmap2) begin
	174	tileno2 <= bgmap2[bgmapaddr_in];
	175	if (wr && decode_bgmap2 && ~vraminuse)
	176	bgmap2[bgmapaddr_in] <= data;
	177	end
ec727403	178	if ((vraminuse && ((posx == 3) \|\| (vxpos[2:0] == 3'b000))) \|\| decode_tiledata) begin
4d90f272 JW	179	tilehigh <= tiledatahigh[tileaddr_in];
4d90f272 JW	180	tilelow <= tiledatalow[tileaddr_in];
80ecd2fe	181	if (wr && addr[0] && decode_tiledata && ~vraminuse)
4d90f272	182	tiledatahigh[tileaddr_in] <= data;
80ecd2fe	183	if (wr && ~addr[0] && decode_tiledata && ~vraminuse)
4d90f272	184	tiledatalow[tileaddr_in] <= data;
39a68cde	185	end
2854e399	186	end
537e1f83 JW	187
537e1f83 JW	188	/*** Bus interface ***/
a8f4468d JW	189	assign data = rdlatch ?
	190	((addrlatch == `ADDR_LCDC) ? rLCDC :
	191	(addrlatch == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
	192	(addrlatch == `ADDR_SCY) ? rSCY :
	193	(addrlatch == `ADDR_SCX) ? rSCX :
	194	(addrlatch == `ADDR_LY) ? posy :
	195	(addrlatch == `ADDR_LYC) ? rLYC :
	196	(addrlatch == `ADDR_BGP) ? rBGP :
	197	(addrlatch == `ADDR_OBP0) ? rOBP0 :
	198	(addrlatch == `ADDR_OBP1) ? rOBP1 :
	199	(addrlatch == `ADDR_WY) ? rWY :
	200	(addrlatch == `ADDR_WX) ? rWX :
	201	(decode_tiledata && addrlatch[0]) ? tilehigh :
	202	(decode_tiledata && ~addrlatch[0]) ? tilelow :
75be7c71 JW	203	(decode_bgmap1) ? tileno :
75be7c71 JW	204	8'bzzzzzzzz) :
537e1f83 JW	205	8'bzzzzzzzz;
537e1f83 JW	206
8e2bb384	207	always @(posedge clk)
537e1f83	208	begin
a8f4468d JW	209	rdlatch <= rd;
a8f4468d JW	210	addrlatch <= addr;
537e1f83 JW	211	if (wr)
	212	case (addr)
	213	`ADDR_LCDC: rLCDC <= data;
	214	`ADDR_STAT: rSTAT <= {data[7:2],rSTAT[1:0]};
	215	`ADDR_SCY: rSCY <= data;
	216	`ADDR_SCX: rSCX <= data;
	217	`ADDR_LYC: rLYC <= data;
	218	`ADDR_DMA: rDMA <= data;
	219	`ADDR_BGP: rBGP <= data;
	220	`ADDR_OBP0: rOBP0 <= data;
	221	`ADDR_OBP1: rOBP1 <= data;
	222	`ADDR_WY: rWY <= data;
	223	`ADDR_WX: rWX <= data;
	224	endcase
	225	end
	226	endmodule