system.v

   1 `define BUS_ICACHE 0
   2
   3 module System(input clk);
   4         wire [7:0] bus_req;
   5         wire [7:0] bus_ack;
   6         wire [31:0] bus_addr;
   7         wire [31:0] bus_rdata;
   8         wire [31:0] bus_wdata;
   9         wire bus_rd, bus_wr;
  10         wire bus_ready;
  11
  12         wire bus_req_icache;
  13         assign bus_req = {7'b0, bus_req_icache};
  14         wire bus_ack_icache = bus_ack[`BUS_ICACHE];
  15
  16         wire [31:0] bus_addr_icache;
  17         wire [31:0] bus_wdata_icache;
  18         wire bus_rd_icache;
  19         wire bus_wr_icache;
  20
  21         wire [31:0] bus_rdata_blockram;
  22         wire bus_ready_blockram;
  23
  24         assign bus_addr = bus_addr_icache;
  25         assign bus_rdata = bus_rdata_blockram;
  26         assign bus_wdata = bus_wdata_icache;
  27         assign bus_rd = bus_rd_icache;
  28         assign bus_wr = bus_wr_icache;
  29         assign bus_ready = bus_ready_blockram;
  30
  31         wire [31:0] icache_rd_addr;
  32         wire icache_rd_req;
  33         wire icache_rd_wait;
  34         wire [31:0] icache_rd_data;
  35
  36         wire stall_cause_issue;
  37         wire stall_cause_execute;
  38
  39         wire [31:0] decode_out_op0, decode_out_op1, decode_out_op2, decode_out_spsr;
  40         wire decode_out_carry;
  41         wire [3:0] regfile_read_0, regfile_read_1, regfile_read_2;
  42         wire [31:0] regfile_rdata_0, regfile_rdata_1, regfile_rdata_2, regfile_spsr;
  43         wire execute_out_stall, execute_out_bubble;
  44         wire execute_out_write_reg;
  45         wire [3:0] execute_out_write_num;
  46         wire [31:0] execute_out_write_data;
  47         wire [31:0] jmppc;
  48         wire jmp;
  49
  50         wire bubble_out_fetch;
  51         wire bubble_out_issue;
  52         wire [31:0] insn_out_fetch;
  53         wire [31:0] insn_out_issue;
  54         wire [31:0] pc_out_fetch;
  55         wire [31:0] pc_out_issue;
  56
  57         wire execute_outflush = jmp;
  58         wire issue_flush = execute_outflush;
  59         wire execute_flush = 1'b0;
  60
  61         BusArbiter busarbiter(.bus_req(bus_req), .bus_ack(bus_ack));
  62
  63         ICache icache(
  64                 .clk(clk),
  65                 /* XXX reset? */
  66                 .rd_addr(icache_rd_addr), .rd_req(icache_rd_req),
  67                 .rd_wait(icache_rd_wait), .rd_data(icache_rd_data),
  68                 .bus_req(bus_req_icache), .bus_ack(bus_ack_icache),
  69                 .bus_addr(bus_addr_icache), .bus_rdata(bus_rdata),
  70                 .bus_wdata(bus_wdata_icache), .bus_rd(bus_rd_icache),
  71                 .bus_wr(bus_wr_icache), .bus_ready(bus_ready));
  72
  73         BlockRAM blockram(
  74                 .clk(clk),
  75                 .bus_addr(bus_addr), .bus_rdata(bus_rdata_blockram),
  76                 .bus_wdata(bus_wdata), .bus_rd(bus_rd), .bus_wr(bus_wr),
  77                 .bus_ready(bus_ready_blockram));
  78
  79         Fetch fetch(
  80                 .clk(clk),
  81                 .Nrst(1'b1 /* XXX */),
  82                 .rd_addr(icache_rd_addr), .rd_req(icache_rd_req),
  83                 .rd_wait(icache_rd_wait), .rd_data(icache_rd_data),
  84                 .stall(stall_cause_issue), .jmp(jmp), .jmppc(jmppc),
  85                 .bubble(bubble_out_fetch), .insn(insn_out_fetch),
  86                 .pc(pc_out_fetch));
  87
  88         Issue issue(
  89                 .clk(clk),
  90                 .Nrst(1'b1 /* XXX */),
  91                 .stall(stall_cause_execute), .flush(issue_flush),
  92                 .inbubble(bubble_out_fetch), .insn(insn_out_fetch),
  93                 .inpc(pc_out_fetch), .cpsr(32'b0 /* XXX */),
  94                 .outstall(stall_cause_issue), .outbubble(bubble_out_issue),
  95                 .outpc(pc_out_issue), .outinsn(insn_out_issue));
  96
  97         RegFile regfile(
  98                 .clk(clk),
  99                 .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2),
 100                 .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2),
 101                 .spsr(regfile_spsr), .write(4'b0), .write_req(1'b0), .write_data(10 /* XXX */));
 102
 103         Decode decode(
 104                 .clk(clk),
 105                 .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(32'b0 /* XXX */), .inspsr(regfile_spsr),
 106                 .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2),
 107                 .carry(decode_out_carry), .outspsr(decode_out_spsr),
 108                 .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2),
 109                 .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2));
 110
 111         Execute execute(
 112                 .clk(clk), .Nrst(1'b0),
 113                 .stall(1'b0 /* XXX */), .flush(execute_flush),
 114                 .inbubble(bubble_out_issue), .pc(pc_out_issue), .insn(insn_out_issue),
 115                 .cpsr(32'b0 /* XXX */), .spsr(decode_out_spsr), .op0(decode_out_op0), .op1(decode_out_op1),
 116                 .op2(decode_out_op2), .carry(decode_out_carry),
 117                 .outstall(stall_cause_execute), .outbubble(execute_out_bubble),
 118                 .write_reg(execute_out_write_reg), .write_num(execute_out_write_num),
 119                 .write_data(execute_out_write_data),
 120                 .jmppc(jmppc),
 121                 .jmp(jmp));
 122
 123         reg [31:0] clockno = 0;
 124         always @(posedge clk)
 125         begin
 126                 clockno <= clockno + 1;
 127                 $display("------------------------------------------------------------------------------");
 128                 $display("%3d: FETCH:            Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch);
 129                 $display("%3d: ISSUE:  Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue);
 130                 $display("%3d: DECODE:                      op1 %08x, op2 %08x, op3 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry);
 131                 $display("%3d: EXEC:   Stall: %d, Bubble: %d, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, execute_out_bubble, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp, jmppc);
 132         end
 133 endmodule