ram.hex: Add performance benchmark, P-SPEC 2009.
[firearm.git] / system.v
1 `define BUS_ICACHE 0
2 `define BUS_DCACHE 1
3
4 module System(input clk);
5         wire [7:0] bus_req;
6         wire [7:0] bus_ack;
7         wire [31:0] bus_addr;
8         wire [31:0] bus_rdata;
9         wire [31:0] bus_wdata;
10         wire bus_rd, bus_wr;
11         wire bus_ready;
12
13         wire bus_req_icache;
14         wire bus_req_dcache;
15         assign bus_req = {6'b0, bus_req_dcache, bus_req_icache};
16         wire bus_ack_icache = bus_ack[`BUS_ICACHE];
17         wire bus_ack_dcache = bus_ack[`BUS_DCACHE];
18         
19         wire [31:0] bus_addr_icache;
20         wire [31:0] bus_wdata_icache;
21         wire bus_rd_icache;
22         wire bus_wr_icache;
23         
24         wire [31:0] bus_addr_dcache;
25         wire [31:0] bus_wdata_dcache;
26         wire bus_rd_dcache;
27         wire bus_wr_dcache;
28         
29         wire [31:0] bus_rdata_blockram;
30         wire bus_ready_blockram;
31         
32         assign bus_addr = bus_addr_icache | bus_addr_dcache;
33         assign bus_rdata = bus_rdata_blockram;
34         assign bus_wdata = bus_wdata_icache | bus_wdata_dcache;
35         assign bus_rd = bus_rd_icache | bus_rd_dcache;
36         assign bus_wr = bus_wr_icache | bus_wr_dcache;
37         assign bus_ready = bus_ready_blockram;
38
39         wire [31:0] icache_rd_addr;
40         wire icache_rd_req;
41         wire icache_rd_wait;
42         wire [31:0] icache_rd_data;
43         
44         wire [31:0] dcache_addr;
45         wire dcache_rd_req, dcache_wr_req;
46         wire dcache_rw_wait;
47         wire [31:0] dcache_wr_data, dcache_rd_data;
48         
49         wire [31:0] decode_out_op0, decode_out_op1, decode_out_op2, decode_out_spsr;
50         wire decode_out_carry;
51         
52         wire [3:0] regfile_read_0, regfile_read_1, regfile_read_2, regfile_read_3;
53         wire [31:0] regfile_rdata_0, regfile_rdata_1, regfile_rdata_2, regfile_rdata_3, regfile_spsr;
54         
55         wire execute_out_write_reg;
56         wire [3:0] execute_out_write_num;
57         wire [31:0] execute_out_write_data;
58         wire [31:0] execute_out_op0, execute_out_op1, execute_out_op2;
59         wire [31:0] execute_out_cpsr, execute_out_spsr;
60         wire [31:0] jmppc;
61         wire jmp;
62         
63         wire memory_out_write_reg;
64         wire [3:0] memory_out_write_num;
65         wire [31:0] memory_out_write_data;
66
67         wire cp_ack_terminal;
68         wire cp_busy_terminal;
69         wire [31:0] cp_read_terminal;
70         
71         wire cp_req;
72         wire [31:0] cp_insn;
73         wire cp_ack = cp_ack_terminal;
74         wire cp_busy = cp_busy_terminal;
75         wire cp_rnw;
76         wire [31:0] cp_read = cp_read_terminal;
77         wire [31:0] cp_write;
78         
79         wire stall_cause_issue;
80         wire stall_cause_execute;
81         wire stall_cause_memory;
82         wire bubble_out_fetch;
83         wire bubble_out_issue;
84         wire bubble_out_execute;
85         wire bubble_out_memory;
86         wire [31:0] insn_out_fetch;
87         wire [31:0] insn_out_issue;
88         wire [31:0] insn_out_execute;
89         wire [31:0] insn_out_memory;
90         wire [31:0] pc_out_fetch;
91         wire [31:0] pc_out_issue;
92         wire [31:0] pc_out_execute;
93         wire [31:0] pc_out_memory;
94
95         wire execute_out_backflush;
96
97         BusArbiter busarbiter(.bus_req(bus_req), .bus_ack(bus_ack));
98
99         ICache icache(
100                 .clk(clk),
101                 /* XXX reset? */
102                 .rd_addr(icache_rd_addr), .rd_req(icache_rd_req),
103                 .rd_wait(icache_rd_wait), .rd_data(icache_rd_data),
104                 .bus_req(bus_req_icache), .bus_ack(bus_ack_icache),
105                 .bus_addr(bus_addr_icache), .bus_rdata(bus_rdata),
106                 .bus_wdata(bus_wdata_icache), .bus_rd(bus_rd_icache),
107                 .bus_wr(bus_wr_icache), .bus_ready(bus_ready));
108         
109         DCache dcache(
110                 .clk(clk),
111                 .addr(dcache_addr), .rd_req(dcache_rd_req), .wr_req(dcache_wr_req),
112                 .rw_wait(dcache_rw_wait), .wr_data(dcache_wr_data), .rd_data(dcache_rd_data),
113                 .bus_req(bus_req_dcache), .bus_ack(bus_ack_dcache),
114                 .bus_addr(bus_addr_dcache), .bus_rdata(bus_rdata),
115                 .bus_wdata(bus_wdata_dcache), .bus_rd(bus_rd_dcache),
116                 .bus_wr(bus_wr_dcache), .bus_ready(bus_ready));
117
118         BlockRAM blockram(
119                 .clk(clk),
120                 .bus_addr(bus_addr), .bus_rdata(bus_rdata_blockram),
121                 .bus_wdata(bus_wdata), .bus_rd(bus_rd), .bus_wr(bus_wr),
122                 .bus_ready(bus_ready_blockram));
123
124         Fetch fetch(
125                 .clk(clk),
126                 .Nrst(1'b1 /* XXX */),
127                 .rd_addr(icache_rd_addr), .rd_req(icache_rd_req),
128                 .rd_wait(icache_rd_wait), .rd_data(icache_rd_data),
129                 .stall(stall_cause_issue), .jmp(jmp), .jmppc(jmppc),
130                 .bubble(bubble_out_fetch), .insn(insn_out_fetch),
131                 .pc(pc_out_fetch));
132         
133         Issue issue(
134                 .clk(clk),
135                 .Nrst(1'b1 /* XXX */),
136                 .stall(stall_cause_execute), .flush(execute_out_backflush),
137                 .inbubble(bubble_out_fetch), .insn(insn_out_fetch),
138                 .inpc(pc_out_fetch), .cpsr(32'b0 /* XXX */),
139                 .outstall(stall_cause_issue), .outbubble(bubble_out_issue),
140                 .outpc(pc_out_issue), .outinsn(insn_out_issue));
141         
142         RegFile regfile(
143                 .clk(clk),
144                 .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), .read_2(regfile_read_3),
145                 .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2), .rdata_2(regfile_rdata_3),
146                 .spsr(regfile_spsr), .write(4'b0), .write_req(1'b0), .write_data(10 /* XXX */));
147         
148         Decode decode(
149                 .clk(clk),
150                 .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(32'b0 /* XXX */), .inspsr(regfile_spsr),
151                 .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2),
152                 .carry(decode_out_carry), .outspsr(decode_out_spsr),
153                 .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), 
154                 .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2));
155         
156         Execute execute(
157                 .clk(clk), .Nrst(1'b0),
158                 .stall(stall_cause_memory), .flush(1'b0),
159                 .inbubble(bubble_out_issue), .pc(pc_out_issue), .insn(insn_out_issue),
160                 .cpsr(32'b0 /* XXX */), .spsr(decode_out_spsr), .op0(decode_out_op0), .op1(decode_out_op1),
161                 .op2(decode_out_op2), .carry(decode_out_carry),
162                 .outstall(stall_cause_execute), .outbubble(bubble_out_execute),
163                 .write_reg(execute_out_write_reg), .write_num(execute_out_write_num),
164                 .write_data(execute_out_write_data),
165                 .jmp(jmp), .jmppc(jmppc),
166                 .outpc(pc_out_execute), .outinsn(insn_out_execute),
167                 .outop0(execute_out_op0), .outop1(execute_out_op1), .outop2(execute_out_op2),
168                 .outcpsr(execute_out_cpsr), .outspsr(execute_out_spsr));
169         assign execute_out_backflush = jmp;
170         
171         assign cp_insn = insn_out_execute;
172         Memory memory(
173                 .clk(clk), .Nrst(1'b0),
174                 /* stall? flush? */
175                 .busaddr(dcache_addr), .rd_req(dcache_rd_req), .wr_req(dcache_wr_req),
176                 .rw_wait(dcache_rw_wait), .wr_data(dcache_wr_data), .rd_data(dcache_rd_data),
177                 .st_read(regfile_read_3), .st_data(regfile_rdata_3),
178                 .inbubble(bubble_out_execute), .pc(pc_out_execute), .insn(insn_out_execute),
179                 .op0(execute_out_op0), .op1(execute_out_op1), .op2(execute_out_op2),
180                 .spsr(execute_out_spsr), .cpsr(execute_out_cpsr),
181                 .write_reg(execute_out_write_reg), .write_num(execute_out_write_num), .write_data(execute_out_write_data),
182                 .outstall(stall_cause_memory), .outbubble(bubble_out_memory), 
183                 .outpc(pc_out_memory), .outinsn(insn_out_memory),
184                 .out_write_reg(memory_out_write_reg), .out_write_num(memory_out_write_num), 
185                 .out_write_data(memory_out_write_data),
186                 .cp_req(cp_req), .cp_ack(cp_ack), .cp_busy(cp_busy), .cp_rnw(cp_rnw), .cp_read(cp_read), .cp_write(cp_write));
187         
188         Terminal terminal(      
189                 .clk(clk),
190                 .cp_req(cp_req), .cp_insn(cp_insn), .cp_ack(cp_ack_terminal), .cp_busy(cp_busy_terminal), .cp_rnw(cp_rnw),
191                 .cp_read(cp_read_terminal), .cp_write(cp_write));
192
193         reg [31:0] clockno = 0;
194         always @(posedge clk)
195         begin
196                 clockno <= clockno + 1;
197                 $display("------------------------------------------------------------------------------");
198                 $display("%3d: FETCH:            Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch);
199                 $display("%3d: ISSUE:  Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue);
200                 $display("%3d: DECODE:                      op1 %08x, op2 %08x, op3 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry);
201                 $display("%3d: EXEC:   Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, bubble_out_execute, insn_out_execute, pc_out_execute, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp, jmppc);
202                 $display("%3d: MEMORY: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d]", clockno, stall_cause_memory, bubble_out_memory, insn_out_memory, pc_out_memory, memory_out_write_reg, memory_out_write_data, memory_out_write_num);
203         end
204 endmodule
This page took 0.030609 seconds and 4 git commands to generate.