Remove a lame attempt at just throwin gthings at the problem until it is fixed.

diff --git a/net/3c90x.c b/net/3c90x.c
index 64f1d0184caa5ef20cddbc05ff222a9fca21c6fa..ae8a7716327c2c34396d6a51c777d4bff4bec1ed 100644 (file)
--- a/net/3c90x.c
+++ b/net/3c90x.c
@@ -503,7 +503,7 @@ a3c90x_transmit(const char *dest_addr, unsigned int proto,
                /** Setup the DPD (download descriptor) **/
                INF_3C90X.TransmitDPD.DnNextPtr = 0;
                /** set notification for transmission completion (bit 15) **/
-               INF_3C90X.TransmitDPD.FrameStartHeader = (size + sizeof(hdr)) | 0x8000;
+               INF_3C90X.TransmitDPD.FrameStartHeader = (size + sizeof(hdr)) /*| 0x8000*/;
                INF_3C90X.TransmitDPD.HdrAddr = virt_to_bus(&hdr);
                INF_3C90X.TransmitDPD.HdrLength = sizeof(hdr);
                INF_3C90X.TransmitDPD.DataAddr = virt_to_bus(pkt);
@@ -532,21 +532,13 @@ a3c90x_transmit(const char *dest_addr, unsigned int proto,
 
                if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE))
                {
-                       outputf("3c90x: tx timeout? stat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b));
-                       _issue_command(INF_3C90X.IOAddr, cmdTxReset, 0);
-    if (! INF_3C90X.isBrev)
-       _outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b);
-    _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0);
-    _issue_command(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0);
-    _issue_command(INF_3C90X.IOAddr, cmdSetIndicationEnable, 0x0014);
-    _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661);
+                       outputf("3c90x: tx timeout? txstat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b));
+                       outputf("3c90x: Gen sts %04x", inw(INF_3C90X.IOAddr + regCommandIntStatus_w));
                        continue;
                }
                status = inb(INF_3C90X.IOAddr + regTxStatus_b);
                outb(INF_3C90X.IOAddr + regTxStatus_b, 0x00);
                
-               _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, INT_TXCOMPLETE);
-
                /** successful completion (sans "interrupt Requested" bit) **/
                if ((status & 0xbf) == 0x80)
                        return;
@@ -700,7 +692,7 @@ static int a3c90x_probe(struct pci_dev * pci, void * data)
        pci_read16(pci->bus, pci->dev, pci->fn, 0xE0) & ~0x3);
     
     outputf("3c90x: Picked I/O address %04x", ioaddr);
-//    pci_bother_add(pci);
+    pci_bother_add(pci);
     nic.ioaddr = ioaddr & ~3;
     nic.irqno = 0;