Add some verilator and isim compatibility

[fpgaboy.git] / System.v

diff --git a/System.v b/System.v
index dbcfaa43f65daf5c8a8b8db69773a9a1e8624603..cdcee0932cbac023673f7266f2c0f3611e805211 100644 (file)
--- a/System.v
+++ b/System.v
@@ -15,6 +15,29 @@ module ROM(
        //assign data = rd ? odata : 8'bzzzzzzzz;
 endmodule
 
+module MiniRAM(                        /* XXX will need to go INSIDE the CPU for when we do DMA */
+       input [15:0] address,
+       inout [7:0] data,
+       input clk,
+       input wr, rd);
+       
+       reg [7:0] ram [127:0];
+       
+       wire decode = (address >= 16'hFF80) && (address <= 16'hFFFE);
+       reg [7:0] odata;
+       assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
+       
+       always @(negedge clk)
+       begin
+               if (decode)     // This has to go this way. The only way XST knows how to do
+               begin                           // block ram is chip select, write enable, and always
+                       if (wr)         // reading. "else if rd" does not cut it ...
+                               ram[address[6:0]] <= data;
+                       odata <= ram[address[6:0]];
+               end
+       end
+endmodule
+
 module InternalRAM(
        input [15:0] address,
        inout [7:0] data,
@@ -60,7 +83,16 @@ module Switches(
        end
 endmodule
 
+`ifdef isim
+module Dumpable(input [2:0] r, g, input [1:0] b, input hs, vs, vgaclk);
+endmodule
+`endif
+
 module CoreTop(
+`ifdef isim
+       output reg vgaclk = 0,
+       output reg clk = 0,
+`else
        input xtal,
        input [7:0] switches,
        input [3:0] buttons,
@@ -68,15 +100,31 @@ module CoreTop(
        output serio,
        output wire [3:0] digits,
        output wire [7:0] seven,
+`endif
        output wire hs, vs,
        output wire [2:0] r, g,
-       output wire [1:0] b);
+       output wire [1:0] b,
+       output wire soundl, soundr);
+
+`ifdef isim
+       always #62 clk <= ~clk;
+       always #100 vgaclk <= ~vgaclk;
+       
+       Dumpable dump(r,g,b,hs,vs,vgaclk);
        
+       wire [7:0] leds;
+       wire serio;
+       wire [3:0] digits;
+       wire [7:0] seven;
+       wire [7:0] switches = 8'b0;
+       wire [3:0] buttons = 4'b0;
+`else  
        wire xtalb, clk, vgaclk;
        IBUFG iclkbuf(.O(xtalb), .I(xtal));
        CPUDCM dcm (.CLKIN_IN(xtalb), .CLKFX_OUT(clk));
        pixDCM pixdcm (.CLKIN_IN(xtalb), .CLKFX_OUT(vgaclk));
-       
+`endif
+
        wire [15:0] addr;       
        wire [7:0] data;
        wire wr, rd;
@@ -173,6 +221,14 @@ module CoreTop(
                .wr(wr),
                .rd(rd)
                );
+       
+       MiniRAM mram(
+               .address(addr),
+               .data(data),
+               .clk(clk),
+               .wr(wr),
+               .rd(rd)
+               );
 
        Timer tmr(
                .clk(clk),
@@ -192,12 +248,23 @@ module CoreTop(
                .vblank(vblankirq),
                .lcdc(lcdcirq),
                .tovf(tmrirq),
-               .serial(0),
-               .buttons(0),
+               .serial(1'b0),
+               .buttons(1'b0),
                .master(irq),
                .jaddr(jaddr));
+       
+       Soundcore sound(
+               .core_clk(clk),
+               .rd(rd),
+               .wr(wr),
+               .addr(addr),
+               .data(data),
+               .snd_data_l(soundl),
+               .snd_data_r(soundr));
 endmodule
 
+`ifdef verilator
+`else
 module TestBench();
        reg clk = 1;
        wire [15:0] addr;
@@ -274,3 +341,4 @@ module TestBench();
                .switches(switches),
                .ledout(leds));
 endmodule
+`endif