]> Joshua Wise's Git repositories - fpgaboy.git/blobdiff - GBZ80Core.v
Fix part of the indentation tragedy.
[fpgaboy.git] / GBZ80Core.v
index b7994ae3ce4fea35f6d54ed170c8385bdf8d4e59..338c2d7f3ea283261b7895adb96c2767b6f86770 100644 (file)
 `define INSN_POP_reg                   8'b11xx0001
 `define INSN_LDH_AC                    8'b111x0010     // Either LDH A,(C) or LDH (C),A
 `define INSN_LDx_AHL                   8'b001xx010     // LDD/LDI A,(HL) / (HL),A
+`define INSN_ALU8                              8'b10xxxxxx     // 10 xxx yyy
+`define INSN_NOP                               8'b00000000
+`define INSN_RST                               8'b11xxx111
+`define INSN_RET                               8'b110x1001     // 1 = RETI, 0 = RET
 
 `define INSN_reg_A             3'b111
 `define INSN_reg_B             3'b000
 `define INSN_stack_BC  2'b00
 `define INSN_stack_DE  2'b01
 `define INSN_stack_HL  2'b10
+`define INSN_alu_ADD           3'b000
+`define INSN_alu_ADC           3'b001
+`define INSN_alu_SUB           3'b010
+`define INSN_alu_SBC           3'b011
+`define INSN_alu_AND           3'b100
+`define INSN_alu_XOR           3'b101
+`define INSN_alu_OR            3'b110
+`define INSN_alu_CP            3'b111          // Oh lawd, is dat some CP?
+
 module GBZ80Core(
        input clk,
        output reg [15:0] busaddress,   /* BUS_* is latched on STATE_FETCH. */
@@ -72,6 +85,8 @@ module GBZ80Core(
        reg [7:0] buswdata;
        assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
        
+       reg ie = 0;
+       
        initial begin
                registers[ 0] <= 0;
                registers[ 1] <= 0;
@@ -131,7 +146,7 @@ module GBZ80Core(
                                                `EXEC_NEXTADDR_PCINC;
                                                rd <= 1;
                                        end
-                               1: begin
+                               1:      begin
                                                `EXEC_INC_PC;
                                                if (opcode[5:3] == `INSN_reg_dHL) begin
                                                        address <= {registers[`REG_H], registers[`REG_L]};
@@ -142,7 +157,7 @@ module GBZ80Core(
                                                        `EXEC_NEWCYCLE;
                                                end
                                        end
-                               2: begin
+                               2:      begin
                                                `EXEC_NEWCYCLE;
                                        end
                                endcase
@@ -155,13 +170,13 @@ module GBZ80Core(
                                case (cycle)
                                0:      begin
                                                case (opcode[2:0])
-                                               `INSN_reg_A:    begin wdata <= registers[`REG_A]; end
-                                               `INSN_reg_B:    begin wdata <= registers[`REG_B]; end
-                                               `INSN_reg_C:    begin wdata <= registers[`REG_C]; end
-                                               `INSN_reg_D:    begin wdata <= registers[`REG_D]; end
-                                               `INSN_reg_E:    begin wdata <= registers[`REG_E]; end
-                                               `INSN_reg_H:    begin wdata <= registers[`REG_H]; end
-                                               `INSN_reg_L:    begin wdata <= registers[`REG_L]; end
+                                               `INSN_reg_A:    wdata <= registers[`REG_A];
+                                               `INSN_reg_B:    wdata <= registers[`REG_B];
+                                               `INSN_reg_C:    wdata <= registers[`REG_C];
+                                               `INSN_reg_D:    wdata <= registers[`REG_D];
+                                               `INSN_reg_E:    wdata <= registers[`REG_E];
+                                               `INSN_reg_H:    wdata <= registers[`REG_H];
+                                               `INSN_reg_L:    wdata <= registers[`REG_L];
                                                endcase
                                                address <= {registers[`REG_H], registers[`REG_L]};
                                                wr <= 1; rd <= 0;
@@ -174,11 +189,11 @@ module GBZ80Core(
                        end
                        `INSN_LD_reg_HL: begin
                                case(cycle)
-                               0: begin
+                               0:      begin
                                                address <= {registers[`REG_H], registers[`REG_L]};
                                                rd <= 1;
                                        end
-                               1: begin
+                               1:      begin
                                                tmp <= rdata;
                                                `EXEC_INC_PC;
                                                `EXEC_NEWCYCLE;
@@ -189,13 +204,13 @@ module GBZ80Core(
                                `EXEC_INC_PC;
                                `EXEC_NEWCYCLE;
                                case (opcode[2:0])
-                               `INSN_reg_A:    begin tmp <= registers[`REG_A]; end
-                               `INSN_reg_B:    begin tmp <= registers[`REG_B]; end
-                               `INSN_reg_C:    begin tmp <= registers[`REG_C]; end
-                               `INSN_reg_D:    begin tmp <= registers[`REG_D]; end
-                               `INSN_reg_E:    begin tmp <= registers[`REG_E]; end
-                               `INSN_reg_H:    begin tmp <= registers[`REG_H]; end
-                               `INSN_reg_L:    begin tmp <= registers[`REG_L]; end
+                               `INSN_reg_A:    tmp <= registers[`REG_A];
+                               `INSN_reg_B:    tmp <= registers[`REG_B];
+                               `INSN_reg_C:    tmp <= registers[`REG_C];
+                               `INSN_reg_D:    tmp <= registers[`REG_D];
+                               `INSN_reg_E:    tmp <= registers[`REG_E];
+                               `INSN_reg_H:    tmp <= registers[`REG_H];
+                               `INSN_reg_L:    tmp <= registers[`REG_L];
                                endcase
                        end
                        `INSN_LD_reg_imm16: begin
@@ -226,7 +241,7 @@ module GBZ80Core(
                        end
                        `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
                                case (cycle)
-                               0: begin
+                               0:      begin
                                                wr <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
                                                case (opcode[5:4])
@@ -236,7 +251,7 @@ module GBZ80Core(
                                                `INSN_stack_HL: wdata <= registers[`REG_H];
                                                endcase
                                        end
-                               1: begin
+                               1:      begin
                                                wr <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
                                                case (opcode[5:4])
@@ -247,7 +262,7 @@ module GBZ80Core(
                                                endcase
                                        end
                                2:      begin /* TWIDDLE OUR FUCKING THUMBS! */ end
-                               3: begin
+                               3:      begin
                                                `EXEC_NEWCYCLE;
                                                `EXEC_INC_PC;
                                        end
@@ -255,15 +270,15 @@ module GBZ80Core(
                        end
                        `INSN_POP_reg: begin    /* POP is 12 cycles! */
                                case (cycle)
-                               0: begin
+                               0:      begin
                                                rd <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]};
                                        end
-                               1: begin
+                               1:      begin
                                                rd <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]};
                                        end
-                               2: begin
+                               2:      begin
                                                `EXEC_NEWCYCLE;
                                                `EXEC_INC_PC;
                                        end
@@ -280,7 +295,7 @@ module GBZ80Core(
                                                        wdata <= registers[`REG_A];
                                                end
                                        end
-                               1: begin
+                               1:      begin
                                                `EXEC_NEWCYCLE;
                                                `EXEC_INC_PC;
                                        end
@@ -288,7 +303,7 @@ module GBZ80Core(
                        end
                        `INSN_LDx_AHL: begin
                                case (cycle)
-                               0: begin
+                               0:      begin
                                                address <= {registers[`REG_H],registers[`REG_L]};
                                                if (opcode[3]) begin    // LDx A, (HL)
                                                        rd <= 1;
@@ -303,6 +318,69 @@ module GBZ80Core(
                                        end
                                endcase
                        end
+                       `INSN_ALU8: begin
+                               if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
+                                       // fffffffff fuck your shit, read from (HL) :(
+                                       rd <= 1;
+                                       address <= {registers[`REG_H], registers[`REG_L]};
+                               end else begin
+                                       `EXEC_NEWCYCLE;
+                                       `EXEC_INC_PC;
+                                       case (opcode[2:0])
+                                       `INSN_reg_A:    tmp <= registers[`REG_A];
+                                       `INSN_reg_B:    tmp <= registers[`REG_B];
+                                       `INSN_reg_C:    tmp <= registers[`REG_C];
+                                       `INSN_reg_D:    tmp <= registers[`REG_D];
+                                       `INSN_reg_E:    tmp <= registers[`REG_E];
+                                       `INSN_reg_H:    tmp <= registers[`REG_H];
+                                       `INSN_reg_L:    tmp <= registers[`REG_L];
+                                       `INSN_reg_dHL:  tmp <= rdata;
+                                       endcase
+                               end
+                       end
+                       `INSN_NOP: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
+                       `INSN_RST: begin
+                               case (cycle)
+                               0:      begin
+                                               `EXEC_INC_PC;           // This goes FIRST in RST
+                                       end
+                               1:      begin
+                                               wr <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
+                                               wdata <= registers[`REG_PCH];
+                                       end
+                               2:      begin
+                                               wr <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-2;
+                                               wdata <= registers[`REG_PCL];
+                                       end
+                               3:      begin
+                                               `EXEC_NEWCYCLE;
+                                               {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                                       {10'b0,opcode[5:3],3'b0};
+                                       end
+                               endcase
+                       end
+                       `INSN_RET: begin
+                               case (cycle)
+                               0:      begin
+                                               rd <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
+                                       end
+                               1:      begin
+                                               rd <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+                                       end
+                               2:      begin /* twiddle thumbs */ end
+                               3:      begin
+                                               `EXEC_NEWCYCLE;
+                                               // do NOT increment PC!
+                                       end
+                               endcase
+                       end
                        default:
                                $stop;
                        endcase
@@ -312,8 +390,8 @@ module GBZ80Core(
                        casex (opcode)
                        `INSN_LD_reg_imm8:
                                case (cycle)
-                               0: cycle <= 1;
-                               1: case (opcode[5:3])
+                               0:      cycle <= 1;
+                               1:      case (opcode[5:3])
                                        `INSN_reg_A:    begin registers[`REG_A] <= rdata; cycle <= 0; end
                                        `INSN_reg_B:    begin registers[`REG_B] <= rdata; cycle <= 0; end
                                        `INSN_reg_C:    begin registers[`REG_C] <= rdata; cycle <= 0; end
@@ -323,7 +401,7 @@ module GBZ80Core(
                                        `INSN_reg_L:    begin registers[`REG_L] <= rdata; cycle <= 0; end
                                        `INSN_reg_dHL:  cycle <= 2;
                                        endcase
-                               2: cycle <= 0;
+                               2:      cycle <= 0;
                                endcase
                        `INSN_HALT: begin
                                /* Nothing needs happen here. */
@@ -331,8 +409,8 @@ module GBZ80Core(
                        end
                        `INSN_LD_HL_reg: begin
                                case (cycle)
-                               0: cycle <= 1;
-                               1: cycle <= 0;
+                               0:      cycle <= 1;
+                               1:      cycle <= 0;
                                endcase
                        end
                        `INSN_LD_reg_HL: begin
@@ -340,13 +418,13 @@ module GBZ80Core(
                                0:      cycle <= 1;
                                1:      begin
                                                case (opcode[5:3])
-                                               `INSN_reg_A:    begin registers[`REG_A] <= tmp; end
-                                               `INSN_reg_B:    begin registers[`REG_B] <= tmp; end
-                                               `INSN_reg_C:    begin registers[`REG_C] <= tmp; end
-                                               `INSN_reg_D:    begin registers[`REG_D] <= tmp; end
-                                               `INSN_reg_E:    begin registers[`REG_E] <= tmp; end
-                                               `INSN_reg_H:    begin registers[`REG_H] <= tmp; end
-                                               `INSN_reg_L:    begin registers[`REG_L] <= tmp; end
+                                               `INSN_reg_A:    registers[`REG_A] <= tmp;
+                                               `INSN_reg_B:    registers[`REG_B] <= tmp;
+                                               `INSN_reg_C:    registers[`REG_C] <= tmp;
+                                               `INSN_reg_D:    registers[`REG_D] <= tmp;
+                                               `INSN_reg_E:    registers[`REG_E] <= tmp;
+                                               `INSN_reg_H:    registers[`REG_H] <= tmp;
+                                               `INSN_reg_L:    registers[`REG_L] <= tmp;
                                                endcase
                                                cycle <= 0;
                                        end
@@ -354,13 +432,13 @@ module GBZ80Core(
                        end
                        `INSN_LD_reg_reg: begin
                                case (opcode[5:3])
-                               `INSN_reg_A:    begin registers[`REG_A] <= tmp; end
-                               `INSN_reg_B:    begin registers[`REG_B] <= tmp; end
-                               `INSN_reg_C:    begin registers[`REG_C] <= tmp; end
-                               `INSN_reg_D:    begin registers[`REG_D] <= tmp; end
-                               `INSN_reg_E:    begin registers[`REG_E] <= tmp; end
-                               `INSN_reg_H:    begin registers[`REG_H] <= tmp; end
-                               `INSN_reg_L:    begin registers[`REG_L] <= tmp; end
+                               `INSN_reg_A:    registers[`REG_A] <= tmp;
+                               `INSN_reg_B:    registers[`REG_B] <= tmp;
+                               `INSN_reg_C:    registers[`REG_C] <= tmp;
+                               `INSN_reg_D:    registers[`REG_D] <= tmp;
+                               `INSN_reg_E:    registers[`REG_E] <= tmp;
+                               `INSN_reg_H:    registers[`REG_H] <= tmp;
+                               `INSN_reg_L:    registers[`REG_L] <= tmp;
                                endcase
                        end
                        `INSN_LD_reg_imm16: begin
@@ -467,6 +545,99 @@ module GBZ80Core(
                                        end
                                endcase
                        end
+                       `INSN_ALU8: begin
+                               if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
+                                       /* Sit on our asses. */
+                                       cycle <= 1;
+                               end else begin          /* Actually do the computation! */
+                                       case (opcode[5:3])
+                                       `INSN_alu_ADD: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] + tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] + tmp) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b0,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_ADC: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]};
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]}) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b0,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]}) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp} + {8'b0,registers[`REG_F][4]}) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_AND: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] & tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] & tmp) == 0) ? 1'b1 : 1'b0,
+                                                         3'b010,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_OR: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] | tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] | tmp) == 0) ? 1'b1 : 1'b0,
+                                                         3'b000,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_XOR: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] ^ tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] ^ tmp) == 0) ? 1'b1 : 1'b0,
+                                                         3'b000,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       default:
+                                               $stop;
+                                       endcase
+                               end
+                       end
+                       `INSN_NOP: begin /* NOP! */ end
+                       `INSN_RST: begin
+                               case (cycle)
+                               0:      cycle <= 1;
+                               1:      cycle <= 2;
+                               2:      cycle <= 3;
+                               3:      begin
+                                               cycle <= 0;
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]}-2;
+                                       end
+                               endcase
+                       end
+                       `INSN_RET: begin
+                               case (cycle)
+                               0:      cycle <= 1;
+                               1:      begin
+                                               cycle <= 2;
+                                               registers[`REG_PCL] <= rdata;
+                                       end
+                               2:      begin
+                                               cycle <= 3;
+                                               registers[`REG_PCH] <= rdata;
+                                       end
+                               3:      begin
+                                               cycle <= 0;
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]} + 2;
+                                               if (opcode[4])  /* RETI */
+                                                       ie <= 1;
+                                       end
+                               endcase
+                       end
                        endcase
                        state <= `STATE_FETCH;
                end
This page took 1.336901 seconds and 4 git commands to generate.