`define INSN_NOP 8'b00000000
`define INSN_RST 8'b11xxx111
`define INSN_RET 8'b110x1001 // 1 = RETI, 0 = RET
+`define INSN_CALL 8'b11001101
`define INSN_reg_A 3'b111
`define INSN_reg_B 3'b000
reg [7:0] rdata, wdata; /* Read data from this bus cycle, or write data for the next. */
reg rd = 1, wr = 0, newcycle = 1;
- reg [7:0] tmp; /* Generic temporary reg. */
+ reg [7:0] tmp, tmp2; /* Generic temporary regs. */
reg [7:0] buswdata;
assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
`EXEC_NEXTADDR_PCINC;
rd <= 1;
end
- 1: begin
+ 1: begin
`EXEC_INC_PC;
if (opcode[5:3] == `INSN_reg_dHL) begin
address <= {registers[`REG_H], registers[`REG_L]};
`EXEC_NEWCYCLE;
end
end
- 2: begin
+ 2: begin
`EXEC_NEWCYCLE;
end
endcase
case (cycle)
0: begin
case (opcode[2:0])
- `INSN_reg_A: begin wdata <= registers[`REG_A]; end
- `INSN_reg_B: begin wdata <= registers[`REG_B]; end
- `INSN_reg_C: begin wdata <= registers[`REG_C]; end
- `INSN_reg_D: begin wdata <= registers[`REG_D]; end
- `INSN_reg_E: begin wdata <= registers[`REG_E]; end
- `INSN_reg_H: begin wdata <= registers[`REG_H]; end
- `INSN_reg_L: begin wdata <= registers[`REG_L]; end
+ `INSN_reg_A: wdata <= registers[`REG_A];
+ `INSN_reg_B: wdata <= registers[`REG_B];
+ `INSN_reg_C: wdata <= registers[`REG_C];
+ `INSN_reg_D: wdata <= registers[`REG_D];
+ `INSN_reg_E: wdata <= registers[`REG_E];
+ `INSN_reg_H: wdata <= registers[`REG_H];
+ `INSN_reg_L: wdata <= registers[`REG_L];
endcase
address <= {registers[`REG_H], registers[`REG_L]};
wr <= 1; rd <= 0;
end
`INSN_LD_reg_HL: begin
case(cycle)
- 0: begin
+ 0: begin
address <= {registers[`REG_H], registers[`REG_L]};
rd <= 1;
end
- 1: begin
+ 1: begin
tmp <= rdata;
`EXEC_INC_PC;
`EXEC_NEWCYCLE;
`EXEC_INC_PC;
`EXEC_NEWCYCLE;
case (opcode[2:0])
- `INSN_reg_A: begin tmp <= registers[`REG_A]; end
- `INSN_reg_B: begin tmp <= registers[`REG_B]; end
- `INSN_reg_C: begin tmp <= registers[`REG_C]; end
- `INSN_reg_D: begin tmp <= registers[`REG_D]; end
- `INSN_reg_E: begin tmp <= registers[`REG_E]; end
- `INSN_reg_H: begin tmp <= registers[`REG_H]; end
- `INSN_reg_L: begin tmp <= registers[`REG_L]; end
+ `INSN_reg_A: tmp <= registers[`REG_A];
+ `INSN_reg_B: tmp <= registers[`REG_B];
+ `INSN_reg_C: tmp <= registers[`REG_C];
+ `INSN_reg_D: tmp <= registers[`REG_D];
+ `INSN_reg_E: tmp <= registers[`REG_E];
+ `INSN_reg_H: tmp <= registers[`REG_H];
+ `INSN_reg_L: tmp <= registers[`REG_L];
endcase
end
`INSN_LD_reg_imm16: begin
end
`INSN_PUSH_reg: begin /* PUSH is 16 cycles! */
case (cycle)
- 0: begin
+ 0: begin
wr <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
case (opcode[5:4])
`INSN_stack_HL: wdata <= registers[`REG_H];
endcase
end
- 1: begin
+ 1: begin
wr <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
case (opcode[5:4])
endcase
end
2: begin /* TWIDDLE OUR FUCKING THUMBS! */ end
- 3: begin
+ 3: begin
`EXEC_NEWCYCLE;
`EXEC_INC_PC;
end
end
`INSN_POP_reg: begin /* POP is 12 cycles! */
case (cycle)
- 0: begin
+ 0: begin
rd <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]};
end
- 1: begin
+ 1: begin
rd <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]};
end
- 2: begin
+ 2: begin
`EXEC_NEWCYCLE;
`EXEC_INC_PC;
end
wdata <= registers[`REG_A];
end
end
- 1: begin
+ 1: begin
`EXEC_NEWCYCLE;
`EXEC_INC_PC;
end
end
`INSN_LDx_AHL: begin
case (cycle)
- 0: begin
+ 0: begin
address <= {registers[`REG_H],registers[`REG_L]};
if (opcode[3]) begin // LDx A, (HL)
rd <= 1;
`EXEC_NEWCYCLE;
`EXEC_INC_PC;
case (opcode[2:0])
- `INSN_reg_A: begin tmp <= registers[`REG_A]; end
- `INSN_reg_B: begin tmp <= registers[`REG_B]; end
- `INSN_reg_C: begin tmp <= registers[`REG_C]; end
- `INSN_reg_D: begin tmp <= registers[`REG_D]; end
- `INSN_reg_E: begin tmp <= registers[`REG_E]; end
- `INSN_reg_H: begin tmp <= registers[`REG_H]; end
- `INSN_reg_L: begin tmp <= registers[`REG_L]; end
- `INSN_reg_dHL: begin tmp <= rdata; end
+ `INSN_reg_A: tmp <= registers[`REG_A];
+ `INSN_reg_B: tmp <= registers[`REG_B];
+ `INSN_reg_C: tmp <= registers[`REG_C];
+ `INSN_reg_D: tmp <= registers[`REG_D];
+ `INSN_reg_E: tmp <= registers[`REG_E];
+ `INSN_reg_H: tmp <= registers[`REG_H];
+ `INSN_reg_L: tmp <= registers[`REG_L];
+ `INSN_reg_dHL: tmp <= rdata;
endcase
end
end
`INSN_RST: begin
case (cycle)
0: begin
- `EXEC_INC_PC; // This goes FIRST
+ `EXEC_INC_PC; // This goes FIRST in RST
end
- 1: begin
+ 1: begin
wr <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
wdata <= registers[`REG_PCH];
end
- 2: begin
+ 2: begin
wr <= 1;
address <= {registers[`REG_SPH],registers[`REG_SPL]}-2;
wdata <= registers[`REG_PCL];
end
- 3: begin
+ 3: begin
`EXEC_NEWCYCLE;
{registers[`REG_PCH],registers[`REG_PCL]} <=
{10'b0,opcode[5:3],3'b0};
end
endcase
end
+ `INSN_CALL: begin
+ case (cycle)
+ 0: begin
+ `EXEC_INC_PC;
+ `EXEC_NEXTADDR_PCINC;
+ rd <= 1;
+ end
+ 1: begin
+ `EXEC_INC_PC;
+ `EXEC_NEXTADDR_PCINC;
+ rd <= 1;
+ end
+ 2: begin
+ `EXEC_INC_PC;
+ end
+ 3: begin
+ address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
+ wdata <= registers[`REG_PCH];
+ wr <= 1;
+ end
+ 4: begin
+ address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+ wdata <= registers[`REG_PCL];
+ wr <= 1;
+ end
+ 5: begin
+ `EXEC_NEWCYCLE; /* do NOT increment the PC */
+ end
+ endcase
+ end
default:
$stop;
endcase
casex (opcode)
`INSN_LD_reg_imm8:
case (cycle)
- 0: cycle <= 1;
- 1: case (opcode[5:3])
+ 0: cycle <= 1;
+ 1: case (opcode[5:3])
`INSN_reg_A: begin registers[`REG_A] <= rdata; cycle <= 0; end
`INSN_reg_B: begin registers[`REG_B] <= rdata; cycle <= 0; end
`INSN_reg_C: begin registers[`REG_C] <= rdata; cycle <= 0; end
`INSN_reg_L: begin registers[`REG_L] <= rdata; cycle <= 0; end
`INSN_reg_dHL: cycle <= 2;
endcase
- 2: cycle <= 0;
+ 2: cycle <= 0;
endcase
`INSN_HALT: begin
/* Nothing needs happen here. */
end
`INSN_LD_HL_reg: begin
case (cycle)
- 0: cycle <= 1;
- 1: cycle <= 0;
+ 0: cycle <= 1;
+ 1: cycle <= 0;
endcase
end
`INSN_LD_reg_HL: begin
0: cycle <= 1;
1: begin
case (opcode[5:3])
- `INSN_reg_A: begin registers[`REG_A] <= tmp; end
- `INSN_reg_B: begin registers[`REG_B] <= tmp; end
- `INSN_reg_C: begin registers[`REG_C] <= tmp; end
- `INSN_reg_D: begin registers[`REG_D] <= tmp; end
- `INSN_reg_E: begin registers[`REG_E] <= tmp; end
- `INSN_reg_H: begin registers[`REG_H] <= tmp; end
- `INSN_reg_L: begin registers[`REG_L] <= tmp; end
+ `INSN_reg_A: registers[`REG_A] <= tmp;
+ `INSN_reg_B: registers[`REG_B] <= tmp;
+ `INSN_reg_C: registers[`REG_C] <= tmp;
+ `INSN_reg_D: registers[`REG_D] <= tmp;
+ `INSN_reg_E: registers[`REG_E] <= tmp;
+ `INSN_reg_H: registers[`REG_H] <= tmp;
+ `INSN_reg_L: registers[`REG_L] <= tmp;
endcase
cycle <= 0;
end
end
`INSN_LD_reg_reg: begin
case (opcode[5:3])
- `INSN_reg_A: begin registers[`REG_A] <= tmp; end
- `INSN_reg_B: begin registers[`REG_B] <= tmp; end
- `INSN_reg_C: begin registers[`REG_C] <= tmp; end
- `INSN_reg_D: begin registers[`REG_D] <= tmp; end
- `INSN_reg_E: begin registers[`REG_E] <= tmp; end
- `INSN_reg_H: begin registers[`REG_H] <= tmp; end
- `INSN_reg_L: begin registers[`REG_L] <= tmp; end
+ `INSN_reg_A: registers[`REG_A] <= tmp;
+ `INSN_reg_B: registers[`REG_B] <= tmp;
+ `INSN_reg_C: registers[`REG_C] <= tmp;
+ `INSN_reg_D: registers[`REG_D] <= tmp;
+ `INSN_reg_E: registers[`REG_E] <= tmp;
+ `INSN_reg_H: registers[`REG_H] <= tmp;
+ `INSN_reg_L: registers[`REG_L] <= tmp;
endcase
end
`INSN_LD_reg_imm16: begin
case (cycle)
0: cycle <= 1;
1: cycle <= 2;
- 2: cycle <= 3;
+ 2: cycle <= 3;
3: begin
cycle <= 0;
{registers[`REG_SPH],registers[`REG_SPL]} <=
end
endcase
end
+ `INSN_CALL: begin
+ case (cycle)
+ 0: cycle <= 1;
+ 1: begin
+ cycle <= 2;
+ tmp <= rdata; // tmp contains newpcl
+ end
+ 2: begin
+ cycle <= 3;
+ tmp2 <= rdata; // tmp2 contains newpch
+ end
+ 3: begin
+ cycle <= 4;
+ end
+ 4: begin
+ cycle <= 5;
+ registers[`REG_PCH] <= tmp2;
+ end
+ 5: begin
+ {registers[`REG_SPH],registers[`REG_SPL]} <=
+ {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+ registers[`REG_PCL] <= tmp;
+ cycle <= 0;
+ end
+ endcase
+ end
+ default:
+ $stop;
endcase
state <= `STATE_FETCH;
end
endmodule
`timescale 1ns / 1ps
+module ROM(
+ input [15:0] address,
+ inout [7:0] data,
+ input wr, rd);
+
+ reg [7:0] rom [2047:0];
+ initial $readmemh("rom.hex", rom);
+
+ wire decode = address[15:13] == 0;
+ reg [7:0] odata;
+ wire idata = data;
+ assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
+
+ always @(posedge rd)
+ if (decode)
+ odata <= rom[address];
+endmodule
+
+module InternalRAM(
+ input [15:0] address,
+ inout [7:0] data,
+ input clk,
+ input wr, rd);
+
+ reg [7:0] ram [8191:0];
+
+ wire decode = (address >= 16'hC000) && (address < 16'hFE00);
+ reg [7:0] odata;
+ wire idata = data;
+ assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
+
+ reg [13:0] diq;
+ initial
+ for (diq = 0; diq < 8191; diq = diq + 1)
+ ram[diq] = 8'h43;
+
+ always @(negedge clk)
+ begin
+ if (decode && rd)
+ odata <= ram[address[12:0]];
+ if (decode && wr)
+ ram[address[12:0]] <= data;
+ end
+endmodule
+
module TestBench();
reg clk = 0;
wire [15:0] addr;
wire [7:0] data;
wire wr, rd;
- reg [7:0] rom [2047:0];
- initial $readmemh("rom.hex", rom);
always #10 clk <= ~clk;
GBZ80Core core(
.clk(clk),
.busdata(data),
.buswr(wr),
.busrd(rd));
- assign data = rd ? rom[addr] : 8'bzzzzzzzz;
+
+ ROM rom(
+ .address(addr),
+ .data(data),
+ .wr(wr),
+ .rd(rd));
+
+ InternalRAM ram(
+ .address(addr),
+ .data(data),
+ .clk(clk),
+ .wr(wr),
+ .rd(rd));
endmodule