]> Joshua Wise's Git repositories - fpgaboy.git/blobdiff - GBZ80Core.v
Add RET/IRET. Fix a bug in RST where the PC pushed to the stack was incorrect.
[fpgaboy.git] / GBZ80Core.v
index 1d06b12f1bfd3cd10d752cd166e0d8a195c1d9d8..c0c2b26f9712ee16ea2298246e7563343e3ab00a 100644 (file)
 `define INSN_PUSH_reg          8'b11xx0101
 `define INSN_POP_reg                   8'b11xx0001
 `define INSN_LDH_AC                    8'b111x0010     // Either LDH A,(C) or LDH (C),A
+`define INSN_LDx_AHL                   8'b001xx010     // LDD/LDI A,(HL) / (HL),A
+`define INSN_ALU8                              8'b10xxxxxx     // 10 xxx yyy
+`define INSN_NOP                               8'b00000000
+`define INSN_RST                               8'b11xxx111
+`define INSN_RET                               8'b110x1001     // 1 = RETI, 0 = RET
+
 `define INSN_reg_A             3'b111
 `define INSN_reg_B             3'b000
 `define INSN_reg_C             3'b001
 `define INSN_stack_BC  2'b00
 `define INSN_stack_DE  2'b01
 `define INSN_stack_HL  2'b10
+`define INSN_alu_ADD           3'b000
+`define INSN_alu_ADC           3'b001
+`define INSN_alu_SUB           3'b010
+`define INSN_alu_SBC           3'b011
+`define INSN_alu_AND           3'b100
+`define INSN_alu_XOR           3'b101
+`define INSN_alu_OR            3'b110
+`define INSN_alu_CP            3'b111          // Oh lawd, is dat some CP?
+
 module GBZ80Core(
        input clk,
        output reg [15:0] busaddress,   /* BUS_* is latched on STATE_FETCH. */
@@ -70,6 +85,8 @@ module GBZ80Core(
        reg [7:0] buswdata;
        assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
        
+       reg ie = 0;
+       
        initial begin
                registers[ 0] <= 0;
                registers[ 1] <= 0;
@@ -275,7 +292,7 @@ module GBZ80Core(
                                                        rd <= 1;
                                                end else begin
                                                        wr <= 1;
-                                                       wdata <= {8'hFF,registers[`REG_A]};
+                                                       wdata <= registers[`REG_A];
                                                end
                                        end
                                1: begin
@@ -284,6 +301,86 @@ module GBZ80Core(
                                        end
                                endcase
                        end
+                       `INSN_LDx_AHL: begin
+                               case (cycle)
+                               0: begin
+                                               address <= {registers[`REG_H],registers[`REG_L]};
+                                               if (opcode[3]) begin    // LDx A, (HL)
+                                                       rd <= 1;
+                                               end else begin
+                                                       wr <= 1;
+                                                       wdata <= registers[`REG_A];
+                                               end
+                                       end
+                               1:      begin
+                                               `EXEC_NEWCYCLE;
+                                               `EXEC_INC_PC;
+                                       end
+                               endcase
+                       end
+                       `INSN_ALU8: begin
+                               if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
+                                       // fffffffff fuck your shit, read from (HL) :(
+                                       rd <= 1;
+                                       address <= {registers[`REG_H], registers[`REG_L]};
+                               end else begin
+                                       `EXEC_NEWCYCLE;
+                                       `EXEC_INC_PC;
+                                       case (opcode[2:0])
+                                       `INSN_reg_A:    begin tmp <= registers[`REG_A]; end
+                                       `INSN_reg_B:    begin tmp <= registers[`REG_B]; end
+                                       `INSN_reg_C:    begin tmp <= registers[`REG_C]; end
+                                       `INSN_reg_D:    begin tmp <= registers[`REG_D]; end
+                                       `INSN_reg_E:    begin tmp <= registers[`REG_E]; end
+                                       `INSN_reg_H:    begin tmp <= registers[`REG_H]; end
+                                       `INSN_reg_L:    begin tmp <= registers[`REG_L]; end
+                                       `INSN_reg_dHL:  begin tmp <= rdata; end
+                                       endcase
+                               end
+                       end
+                       `INSN_NOP: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
+                       `INSN_RST: begin
+                               case (cycle)
+                               0:      begin
+                                               `EXEC_INC_PC;           // This goes FIRST
+                                       end
+                               1: begin
+                                               wr <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
+                                               wdata <= registers[`REG_PCH];
+                                       end
+                               2: begin
+                                               wr <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-2;
+                                               wdata <= registers[`REG_PCL];
+                                       end
+                               3: begin
+                                               `EXEC_NEWCYCLE;
+                                               {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                                       {10'b0,opcode[5:3],3'b0};
+                                       end
+                               endcase
+                       end
+                       `INSN_RET: begin
+                               case (cycle)
+                               0:      begin
+                                               rd <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
+                                       end
+                               1:      begin
+                                               rd <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+                                       end
+                               2:      begin /* twiddle thumbs */ end
+                               3:      begin
+                                               `EXEC_NEWCYCLE;
+                                               // do NOT increment PC!
+                                       end
+                               endcase
+                       end
                        default:
                                $stop;
                        endcase
@@ -434,6 +531,113 @@ module GBZ80Core(
                                        end
                                endcase
                        end
+                       `INSN_LDx_AHL: begin
+                               case (cycle)
+                               0:      cycle <= 1;
+                               1:      begin
+                                               cycle <= 0;
+                                               if (opcode[3])
+                                                       registers[`REG_A] <= rdata;
+                                               {registers[`REG_H],registers[`REG_L]} <=
+                                                       opcode[4] ? // if set, LDD, else LDI
+                                                       ({registers[`REG_H],registers[`REG_L]} - 1) :
+                                                       ({registers[`REG_H],registers[`REG_L]} + 1);
+                                       end
+                               endcase
+                       end
+                       `INSN_ALU8: begin
+                               if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
+                                       /* Sit on our asses. */
+                                       cycle <= 1;
+                               end else begin          /* Actually do the computation! */
+                                       case (opcode[5:3])
+                                       `INSN_alu_ADD: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] + tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] + tmp) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b0,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_ADC: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]};
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]}) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b0,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]}) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp} + {8'b0,registers[`REG_F][4]}) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_AND: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] & tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] & tmp) == 0) ? 1'b1 : 1'b0,
+                                                         3'b010,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_OR: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] | tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] | tmp) == 0) ? 1'b1 : 1'b0,
+                                                         3'b000,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_XOR: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] ^ tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] ^ tmp) == 0) ? 1'b1 : 1'b0,
+                                                         3'b000,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       default:
+                                               $stop;
+                                       endcase
+                               end
+                       end
+                       `INSN_NOP: begin /* NOP! */ end
+                       `INSN_RST: begin
+                               case (cycle)
+                               0:      cycle <= 1;
+                               1:      cycle <= 2;
+                               2: cycle <= 3;
+                               3:      begin
+                                               cycle <= 0;
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]}-2;
+                                       end
+                               endcase
+                       end
+                       `INSN_RET: begin
+                               case (cycle)
+                               0:      cycle <= 1;
+                               1:      begin
+                                               cycle <= 2;
+                                               registers[`REG_PCL] <= rdata;
+                                       end
+                               2:      begin
+                                               cycle <= 3;
+                                               registers[`REG_PCH] <= rdata;
+                                       end
+                               3:      begin
+                                               cycle <= 0;
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]} + 2;
+                                               if (opcode[4])  /* RETI */
+                                                       ie <= 1;
+                                       end
+                               endcase
+                       end
                        endcase
                        state <= `STATE_FETCH;
                end
This page took 0.034284 seconds and 4 git commands to generate.