LCDC.v

   1 `define ADDR_LCDC       16'hFF40
   2 `define ADDR_STAT       16'hFF41
   3 `define ADDR_SCY        16'hFF42
   4 `define ADDR_SCX        16'hFF43
   5 `define ADDR_LY         16'hFF44
   6 `define ADDR_LYC        16'hFF45
   7 `define ADDR_DMA        16'hFF46
   8 `define ADDR_BGP        16'hFF47
   9 `define ADDR_OBP0       16'hFF48
  10 `define ADDR_OBP1       16'hFF49
  11 `define ADDR_WY         16'hFF4A
  12 `define ADDR_WX         16'hFF4B
  13
  14 module LCDC(
  15         input [15:0] addr,
  16         inout [7:0] data,
  17         input clk,      // 8MHz clock
  18         input wr, rd,
  19         output wire lcdcirq,
  20         output wire vblankirq,
  21         output wire lcdclk, lcdvs, lcdhs,
  22         output reg [2:0] lcdr, lcdg, output reg [1:0] lcdb);
  23
  24         /***** Needed prototypes *****/
  25         wire [1:0] pixdata;
  26
  27         /***** Internal clock that is stable and does not depend on CPU in single/double clock mode *****/
  28         reg clk4 = 0;
  29         always @(posedge clk)
  30                 clk4 = ~clk4;
  31         assign lcdclk = clk4;
  32
  33         /***** LCD control registers *****/
  34         reg [7:0] rLCDC = 8'h91;
  35         reg [7:0] rSTAT = 8'h00;
  36         reg [7:0] rSCY = 8'b00;
  37         reg [7:0] rSCX = 8'b00;
  38         reg [7:0] rLYC = 8'b00;
  39         reg [7:0] rDMA = 8'b00;
  40         reg [7:0] rBGP = 8'b00;
  41         reg [7:0] rOBP0 = 8'b00;
  42         reg [7:0] rOBP1 = 8'b00;
  43         reg [7:0] rWY = 8'b00;
  44         reg [7:0] rWX = 8'b00;
  45
  46         /***** Sync generation *****/
  47
  48         /* A complete cycle takes 456 clocks.
  49          * VBlank lasts 4560 clocks (10 scanlines) -- LY = 144 - 153.
  50          *
  51          * Modes: 0 -> in hblank and OAM/VRAM available - present 207 clks
  52          *        1 -> in vblank and OAM/VRAM available
  53          *        2 -> OAM in use - present 86 clks
  54          *        3 -> OAM/VRAM in use - present 163 clks
  55          * So, X = 0~162 is HActive,
  56          * X = 163-369 is HBlank,
  57          * X = 370-455 is HWhirrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.
  58          * [02:15:10] <Judge_> LY is updated near the 0 -> 2 transition
  59          * [02:15:38] <Judge_> it seems to be updated internally first before it is visible in the LY register itself
  60          * [02:15:40] <Judge_> some kind of delay
  61          * [02:16:19] <Judge_> iirc it is updated about 4 cycles prior to mode 2
  62          */
  63         reg [8:0] posx = 9'h000;
  64         reg [7:0] posy = 8'h00;
  65
  66         wire vraminuse = (posx < 163) && (posy < 144);
  67         wire oaminuse = (posx > 369) && (posy < 144);
  68
  69         wire display = (posx > 2) && (posx < 163) && (posy < 144);
  70
  71         wire [1:0] mode = (posy < 144) ?
  72                                 (vraminuse ? 2'b11 :
  73                                  oaminuse ? 2'b10 :
  74                                  2'b00)
  75                                 : 2'b01;
  76
  77         wire [7:0] vxpos = rSCX + posx - 3;
  78         wire [7:0] vypos = rSCY + posy;
  79
  80         assign lcdvs = (posy == 153) && (posx == 2);
  81         assign lcdhs = (posx == 2);
  82
  83         wire [2:0] lcdr_ = display ? {pixdata[1] ? 3'b111 : 3'b000} : 3'b000;
  84         wire [2:0] lcdg_ = display ? {pixdata[0] ? 3'b111 : 3'b000} : 3'b000;
  85         wire [1:0] lcdb_ = display ? {(vypos < 8 || vxpos < 8) ? 2'b11 : 2'b00} : 2'b00;
  86
  87         reg mode00irq = 0, mode01irq = 0, mode10irq = 0, lycirq = 0;
  88         assign lcdcirq = (rSTAT[3] & mode00irq) | (rSTAT[4] & mode01irq) | (rSTAT[5] & mode10irq) | (rSTAT[6] & lycirq);
  89         assign vblankirq = (posx == 0 && posy == 153);
  90
  91         always @(posedge clk4)
  92         begin
  93                 if (posx == 455) begin
  94                         posx <= 0;
  95                         if (posy == 153) begin
  96                                 posy <= 0;
  97                                 if (0 == rLYC)
  98                                         lycirq <= 1;
  99                         end else begin
 100                                 posy <= posy + 1;
 101                                 /* Check for vblank and generate an IRQ if needed. */
 102                                 if (posy == 143) begin
 103                                         mode01irq <= 1;
 104                                 end
 105                                 if ((posy + 1) == rLYC)
 106                                         lycirq <= 1;
 107
 108                         end
 109                 end else begin
 110                         posx <= posx + 1;
 111                         if (posx == 165)
 112                                 mode00irq <= 1;
 113                         else if (posx == 373)
 114                                 mode10irq <= 1;
 115                         else begin
 116                                 mode00irq <= 0;
 117                                 mode01irq <= 0;
 118                                 mode10irq <= 0;
 119                         end
 120                         lycirq <= 0;
 121                 end
 122
 123                 lcdr <= lcdr_;
 124                 lcdg <= lcdg_;
 125                 lcdb <= lcdb_;
 126         end
 127
 128         /***** Video RAM *****/
 129         /* Base is 0x8000
 130          *
 131          * Tile data from 8000-8FFF or 8800-97FF
 132          * Background tile maps 9800-9BFF or 9C00-9FFF
 133          */
 134         reg [7:0] tiledatahigh [3071:0];
 135         reg [7:0] tiledatalow [3071:0];
 136         reg [7:0] bgmap1 [1023:0];
 137         reg [7:0] bgmap2 [1023:0];
 138
 139         // Upper five bits are Y coord, lower five bits are X coord
 140         // The new tile number is loaded when vxpos[2:0] is 3'b110
 141         // The new tile data is loaded when vxpos[2:0] is 3'b111
 142         // The new tile data is latched and ready when vxpos[2:0] is 3'b000!
 143         wire [7:0] vxpos_ = vxpos + 1;
 144         wire [9:0] bgmapaddr = {vypos[7:3], vxpos_[7:3]};
 145         reg [7:0] tileno;
 146         wire [10:0] tileaddr = {tileno, vypos[2:0]};
 147         reg [7:0] tilehigh, tilelow;
 148         assign pixdata = {tilehigh[7-vxpos[2:0]], tilelow[7-vxpos[2:0]]};
 149
 150         wire decode_tiledata = (addr >= 16'h8000) && (addr <= 16'h97FF);
 151         wire decode_bgmap1 = (addr >= 16'h9800) && (addr <= 16'h9BFF);
 152
 153         wire [9:0] bgmapaddr_in = vraminuse ? bgmapaddr : addr[9:0];
 154         wire [11:0] tileaddr_in = vraminuse ? tileaddr : addr[12:1];
 155
 156         always @(negedge clk)
 157                 if ((vraminuse && ((posx == 2) || (vxpos[2:0] == 3'b111))) || decode_bgmap1) begin
 158                         tileno <= bgmap1[bgmapaddr_in];
 159                         if (wr && decode_bgmap1 && ~vraminuse)
 160                                 bgmap1[bgmapaddr_in] <= data;
 161                 end
 162
 163         always @(negedge clk)
 164                 if ((vraminuse && ((posx == 3) || (vxpos[2:0] == 3'b000))) || decode_tiledata) begin
 165                         tilehigh <= tiledatahigh[tileaddr_in];
 166                         tilelow <= tiledatalow[tileaddr_in];
 167                         if (wr && addr[0] && decode_tiledata && ~vraminuse)
 168                                 tiledatahigh[tileaddr_in] <= data;
 169                         if (wr && ~addr[0] && decode_tiledata && ~vraminuse)
 170                                 tiledatalow[tileaddr_in] <= data;
 171                 end
 172
 173         /***** Bus interface *****/
 174         assign data = rd ?
 175                         ((addr == `ADDR_LCDC) ? rLCDC :
 176                          (addr == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
 177                          (addr == `ADDR_SCY) ? rSCY :
 178                          (addr == `ADDR_SCX) ? rSCX :
 179                          (addr == `ADDR_LY) ? posy :
 180                          (addr == `ADDR_LYC) ? rLYC :
 181                          (addr == `ADDR_BGP) ? rBGP :
 182                          (addr == `ADDR_OBP0) ? rOBP0 :
 183                          (addr == `ADDR_OBP1) ? rOBP1 :
 184                          (addr == `ADDR_WY) ? rWY :
 185                          (addr == `ADDR_WX) ? rWX :
 186                          (decode_tiledata && addr[0]) ? tilehigh :
 187                          (decode_tiledata && ~addr[0]) ? tilelow :
 188                          (decode_bgmap1) ? tileno :
 189                          8'bzzzzzzzz) :
 190                 8'bzzzzzzzz;
 191
 192         always @(negedge clk)
 193         begin
 194                 if (wr)
 195                         case (addr)
 196                         `ADDR_LCDC:     rLCDC <= data;
 197                         `ADDR_STAT:     rSTAT <= {data[7:2],rSTAT[1:0]};
 198                         `ADDR_SCY:      rSCY <= data;
 199                         `ADDR_SCX:      rSCX <= data;
 200                         `ADDR_LYC:      rLYC <= data;
 201                         `ADDR_DMA:      rDMA <= data;
 202                         `ADDR_BGP:      rBGP <= data;
 203                         `ADDR_OBP0:     rOBP0 <= data;
 204                         `ADDR_OBP1:     rOBP1 <= data;
 205                         `ADDR_WY:       rWY <= data;
 206                         `ADDR_WX:       rWX <= data;
 207                         endcase
 208         end
 209 endmodule