Clean up some warnings.

[fpgaboy.git] / GBZ80Core.v

`define REG_A 0
`define REG_B 1
`define REG_C 2
`define REG_D 3
`define REG_E 4
`define REG_F 5
`define REG_H 6
`define REG_L 7
`define REG_SPH 8
`define REG_SPL 9
`define REG_PCH 10
`define REG_PCL 11

`define FLAG_Z 8'b10000000
`define FLAG_N 8'b01000000
`define FLAG_H 8'b00100000
`define FLAG_C 8'b00010000

`define STATE_FETCH			2'h0
`define STATE_DECODE			2'h1
`define STATE_EXECUTE		2'h2
`define STATE_WRITEBACK		2'h3

`define INSN_LD_reg_imm8	8'b00xxx110
`define INSN_HALT				8'b01110110
`define INSN_LD_HL_reg		8'b01110xxx
`define INSN_LD_reg_HL		8'b01xxx110
`define INSN_LD_reg_reg		8'b01xxxxxx
`define INSN_LD_reg_imm16	8'b00xx0001
`define INSN_LD_SP_HL		8'b11111001
`define INSN_PUSH_reg		8'b11xx0101
`define INSN_POP_reg			8'b11xx0001
`define INSN_LDH_AC			8'b111x0010	// Either LDH A,(C) or LDH (C),A
`define INSN_LDx_AHL			8'b001xx010	// LDD/LDI A,(HL) / (HL),A
`define INSN_ALU8				8'b10xxxxxx	// 10 xxx yyy
`define INSN_NOP				8'b00000000
`define INSN_RST				8'b11xxx111
`define INSN_RET				8'b110x1001	// 1 = RETI, 0 = RET
`define INSN_RETCC			8'b110xx000
`define INSN_CALL				8'b11001101
`define INSN_CALLCC			8'b110xx100	// Not that call/cc.
`define INSN_JP_imm			8'b11000011
`define INSN_JPCC_imm		8'b110xx010
`define INSN_ALU_A		8'b00xxx111
`define INSN_JP_HL			8'b11101001
`define INSN_JR_imm			8'b00011000
`define INSN_JRCC_imm		8'b001xx000
`define INSN_INCDEC16		8'b00xxx011
`define INSN_VOP_INTR		8'b11111100	// 0xFC is grabbed by the fetch if there is an interrupt pending.
`define INSN_DI				8'b11110011
`define INSN_EI				8'b11111011

`define INSN_cc_NZ			2'b00
`define INSN_cc_Z				2'b01
`define INSN_cc_NC			2'b10
`define INSN_cc_C				2'b11

`define INSN_reg_A		3'b111
`define INSN_reg_B		3'b000
`define INSN_reg_C		3'b001
`define INSN_reg_D		3'b010
`define INSN_reg_E		3'b011
`define INSN_reg_H		3'b100
`define INSN_reg_L		3'b101
`define INSN_reg_dHL	3'b110
`define INSN_reg16_BC	2'b00
`define INSN_reg16_DE	2'b01
`define INSN_reg16_HL	2'b10
`define INSN_reg16_SP	2'b11
`define INSN_stack_AF	2'b11
`define INSN_stack_BC	2'b00
`define INSN_stack_DE	2'b01
`define INSN_stack_HL	2'b10
`define INSN_alu_ADD		3'b000
`define INSN_alu_ADC		3'b001
`define INSN_alu_SUB		3'b010
`define INSN_alu_SBC		3'b011
`define INSN_alu_AND		3'b100
`define INSN_alu_XOR		3'b101
`define INSN_alu_OR		3'b110
`define INSN_alu_CP		3'b111		// Oh lawd, is dat some CP?
`define INSN_alu_RLCA		3'b000
`define INSN_alu_RRCA		3'b001
`define INSN_alu_RLA		3'b010
`define INSN_alu_RRA		3'b011
`define INSN_alu_DAA		3'b100
`define INSN_alu_CPL		3'b101
`define INSN_alu_SCF		3'b110
`define INSN_alu_CCF		3'b111

module GBZ80Core(
	input clk,
	output reg [15:0] busaddress,	/* BUS_* is latched on STATE_FETCH. */
	inout [7:0] busdata,
	output reg buswr, output reg busrd,
	input irq, input [7:0] jaddr);
	
	reg [1:0] state;					/* State within this bus cycle (see STATE_*). */
	reg [2:0] cycle;					/* Cycle for instructions. */
	
	reg [7:0] registers[11:0];
	
	reg [15:0] address;				/* Address for the next bus operation. */
	
	reg [7:0] opcode;				/* Opcode from the current machine cycle. */
	
	reg [7:0] rdata, wdata;		/* Read data from this bus cycle, or write data for the next. */
	reg rd, wr, newcycle;
	
	reg [7:0] tmp, tmp2;			/* Generic temporary regs. */
	
	reg [7:0] buswdata;
	assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
	
	reg ie, iedelay;
	
	initial begin
		registers[ 0] <= 0;
		registers[ 1] <= 0;
		registers[ 2] <= 0;
		registers[ 3] <= 0;
		registers[ 4] <= 0;
		registers[ 5] <= 0;
		registers[ 6] <= 0;
		registers[ 7] <= 0;
		registers[ 8] <= 0;
		registers[ 9] <= 0;
		registers[10] <= 0;
		registers[11] <= 0;
		rd <= 1;
		wr <= 0;
		newcycle <= 1;
		state <= 0;
		cycle <= 0;
		busrd <= 0;
		buswr <= 0;
		busaddress <= 0;
		ie <= 0;
		iedelay <= 0;
		opcode <= 0;
		state <= `STATE_WRITEBACK;
		cycle <= 0;
	end

	always @(posedge clk)
		case (state)
		`STATE_FETCH: begin
			if (newcycle) begin
				busaddress <= {registers[`REG_PCH], registers[`REG_PCL]};
				buswr <= 0;
				busrd <= 1;
			end else begin
				busaddress <= address;
				buswr <= wr;
				busrd <= rd;
				if (wr)
					buswdata <= wdata;
			end
			state <= `STATE_DECODE;
		end
		`STATE_DECODE: begin
			if (newcycle) begin
				if (ie && irq)
					opcode <= `INSN_VOP_INTR;
				else
					opcode <= busdata;
				rdata <= busdata;
				newcycle <= 0;
				cycle <= 0;
			end else begin
				if (rd) rdata <= busdata;
				cycle <= cycle + 1;
			end
			if (iedelay) begin
				ie <= 1;
				iedelay <= 0;
			end
			buswr <= 0;
			busrd <= 0;
			wr <= 0;
			rd <= 0;
			address <= 16'bxxxxxxxxxxxxxxxx;	// Make it obvious if something of type has happened.
			wdata <= 8'bxxxxxxxx;
			state <= `STATE_EXECUTE;
		end
		`STATE_EXECUTE: begin
`define EXEC_INC_PC \
	{registers[`REG_PCH], registers[`REG_PCL]} <= {registers[`REG_PCH], registers[`REG_PCL]} + 1
`define EXEC_NEXTADDR_PCINC \
	address <= {registers[`REG_PCH], registers[`REG_PCL]} + 1
`define EXEC_NEWCYCLE \
	newcycle <= 1; rd <= 1; wr <= 0
			casex (opcode)
			`define EXECUTE
			`include "allinsns.v"
			`undef EXECUTE
			`INSN_LDH_AC: begin
				case (cycle)
				0:	begin
						address <= {8'hFF,registers[`REG_C]};
						if (opcode[4]) begin	// LD A,(C)
							rd <= 1;
						end else begin
							wr <= 1;
							wdata <= registers[`REG_A];
						end
					end
				1:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
					end
				endcase
			end
			`INSN_LDx_AHL: begin
				case (cycle)
				0:	begin
						address <= {registers[`REG_H],registers[`REG_L]};
						if (opcode[3]) begin	// LDx A, (HL)
							rd <= 1;
						end else begin
							wr <= 1;
							wdata <= registers[`REG_A];
						end
					end
				1:	begin
						`EXEC_NEWCYCLE;
						`EXEC_INC_PC;
					end
				endcase
			end
			`INSN_ALU8: begin
				if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
					// fffffffff fuck your shit, read from (HL) :(
					rd <= 1;
					address <= {registers[`REG_H], registers[`REG_L]};
				end else begin
					`EXEC_NEWCYCLE;
					`EXEC_INC_PC;
					case (opcode[2:0])
					`INSN_reg_A:	tmp <= registers[`REG_A];
					`INSN_reg_B:	tmp <= registers[`REG_B];
					`INSN_reg_C:	tmp <= registers[`REG_C];
					`INSN_reg_D:	tmp <= registers[`REG_D];
					`INSN_reg_E:	tmp <= registers[`REG_E];
					`INSN_reg_H:	tmp <= registers[`REG_H];
					`INSN_reg_L:	tmp <= registers[`REG_L];
					`INSN_reg_dHL:	tmp <= rdata;
					endcase
				end
			end
			`INSN_ALU_A: begin
				`EXEC_NEWCYCLE;
				`EXEC_INC_PC;
			end
			`INSN_NOP: begin
				`EXEC_NEWCYCLE;
				`EXEC_INC_PC;
			end
			`INSN_RST: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;		// This goes FIRST in RST
					end
				1:	begin
						wr <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
						wdata <= registers[`REG_PCH];
					end
				2:	begin
						wr <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]}-2;
						wdata <= registers[`REG_PCL];
					end
				3:	begin
						`EXEC_NEWCYCLE;
						{registers[`REG_PCH],registers[`REG_PCL]} <=
							{10'b0,opcode[5:3],3'b0};
					end
				endcase
			end
			`INSN_RET,`INSN_RETCC: begin
				case (cycle)
				0:	begin
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]};
					end
				1:	begin	// SPECIAL CASE: cycle does NOT increase linearly with ret!
						`EXEC_INC_PC;	// cycle 1 is skipped if we are not retcc
						case (opcode[4:3])
						`INSN_cc_NZ:	if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
						`INSN_cc_Z:		if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
						`INSN_cc_NC:	if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
						`INSN_cc_C:		if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
						endcase
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]};
					end
				2:	begin
						rd <= 1;
						address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
					end
				3:	begin /* twiddle thumbs */ end
				4:	begin
						`EXEC_NEWCYCLE;
						// do NOT increment PC!
					end
				endcase
			end
			`INSN_CALL,`INSN_CALLCC: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				2:	begin
						`EXEC_INC_PC;
						if (!opcode[0])	// i.e., is callcc
							/* We need to check the condition code to bail out. */
							case (opcode[4:3])
							`INSN_cc_NZ:	if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_Z:		if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_NC:	if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_C:		if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							endcase
					end
				3:	begin
						address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
						wdata <= registers[`REG_PCH];
						wr <= 1;
					end
				4:	begin
						address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
						wdata <= registers[`REG_PCL];
						wr <= 1;
					end
				5:	begin
						`EXEC_NEWCYCLE;	/* do NOT increment the PC */
					end
				endcase
			end
			`INSN_JP_imm,`INSN_JPCC_imm: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				2:	begin
						`EXEC_INC_PC;
						if (!opcode[0]) begin	// i.e., JP cc,nn
							/* We need to check the condition code to bail out. */
							case (opcode[4:3])
							`INSN_cc_NZ:	if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_Z:		if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_NC:	if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_C:		if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							endcase
						end
					end
				3:	begin
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_JP_HL: begin
				`EXEC_NEWCYCLE;
			end
			`INSN_JR_imm,`INSN_JRCC_imm: begin
				case (cycle)
				0:	begin
						`EXEC_INC_PC;
						`EXEC_NEXTADDR_PCINC;
						rd <= 1;
					end
				1: begin
						`EXEC_INC_PC;
						if (opcode[5]) begin	// i.e., JP cc,nn
							/* We need to check the condition code to bail out. */
							case (opcode[4:3])
							`INSN_cc_NZ:	if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_Z:		if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_NC:	if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							`INSN_cc_C:		if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
							endcase
						end
					end
				2:	begin
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_INCDEC16: begin
				case (cycle)
				0: begin
						case (opcode[5:4])
						`INSN_reg16_BC:	begin
							tmp <= registers[`REG_B];
							tmp2 <= registers[`REG_C];
						end
						`INSN_reg16_DE:	begin
							tmp <= registers[`REG_D];
							tmp2 <= registers[`REG_E];
						end
						`INSN_reg16_HL:	begin
							tmp <= registers[`REG_H];
							tmp2 <= registers[`REG_L];
						end
						`INSN_reg16_SP:	begin
							tmp <= registers[`REG_SPH];
							tmp2 <= registers[`REG_SPL];
						end
						endcase
					end
				1: begin
						`EXEC_INC_PC;
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_VOP_INTR: begin
				case (cycle)
				0:	begin
						address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
						wdata <= registers[`REG_PCH];
						wr <= 1;
					end
				1:	begin
						address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
						wdata <= registers[`REG_PCL];
						wr <= 1;
					end
				2:	begin
						`EXEC_NEWCYCLE;
					end
				endcase
			end
			`INSN_DI: begin
				`EXEC_NEWCYCLE;
				`EXEC_INC_PC;
			end
			`INSN_EI: begin
				`EXEC_NEWCYCLE;
				`EXEC_INC_PC;
			end
			default:
				$stop;
			endcase
			state <= `STATE_WRITEBACK;
		end
		`STATE_WRITEBACK: begin
			casex (opcode)
			`define WRITEBACK
			`include "allinsns.v"
			`undef WRITEBACK
			`INSN_LDH_AC: begin
				case (cycle)
				0:	begin /* Type F */ end
				1:	if (opcode[4])
						registers[`REG_A] <= rdata;
				endcase
			end
			`INSN_LDx_AHL: begin
				case (cycle)
				0:	begin /* Type F */ end
				1:	begin
						if (opcode[3])
							registers[`REG_A] <= rdata;
						{registers[`REG_H],registers[`REG_L]} <=
							opcode[4] ? // if set, LDD, else LDI
							({registers[`REG_H],registers[`REG_L]} - 1) :
							({registers[`REG_H],registers[`REG_L]} + 1);
					end
				endcase
			end
			`INSN_ALU8: begin
				if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
					/* Sit on our asses. */
				end else begin		/* Actually do the computation! */
					case (opcode[5:3])
					`INSN_alu_ADD: begin
						registers[`REG_A] <=
							registers[`REG_A] + tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] + tmp) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b0,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_ADC: begin
						registers[`REG_A] <=
							registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]};
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]}) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b0,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]}) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp} + {8'b0,registers[`REG_F][4]}) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_SUB: begin
						registers[`REG_A] <=
							registers[`REG_A] - tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b1,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_SBC: begin
						registers[`REG_A] <=
							registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]});
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]})) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b1,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} - ({1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]})) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} - ({1'b0,tmp} + {8'b0,registers[`REG_F][4]})) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_AND: begin
						registers[`REG_A] <=
							registers[`REG_A] & tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] & tmp) == 0) ? 1'b1 : 1'b0,
							  3'b010,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_OR: begin
						registers[`REG_A] <=
							registers[`REG_A] | tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] | tmp) == 0) ? 1'b1 : 1'b0,
							  3'b000,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_XOR: begin
						registers[`REG_A] <=
							registers[`REG_A] ^ tmp;
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] ^ tmp) == 0) ? 1'b1 : 1'b0,
							  3'b000,
							  registers[`REG_F][3:0]
							};
					end
					`INSN_alu_CP: begin
						registers[`REG_F] <=
							{ /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0,
							  /* N */ 1'b1,
							  /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
							  /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
							  registers[`REG_F][3:0]
							};
					end
					default:
						$stop;
					endcase
				end
			end
			`INSN_ALU_A: begin
				case(opcode[5:3])
				`INSN_alu_RLCA: begin
					registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_A][7]};
					registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]};
				end
				`INSN_alu_RRCA: begin
					registers[`REG_A] <= {registers[`REG_A][0],registers[`REG_A][7:1]};
					registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]};
				end
				`INSN_alu_RLA: begin
					registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_F][4]};
					registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]};
				end
				`INSN_alu_RRA: begin
					registers[`REG_A] <= {registers[`REG_A][4],registers[`REG_A][7:1]};
					registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]};
				end
				`INSN_alu_CPL: begin
					registers[`REG_A] <= ~registers[`REG_A];
					registers[`REG_F] <= {registers[`REG_F][7],1'b1,1'b1,registers[`REG_F][4:0]};
				end
				`INSN_alu_SCF: begin
					registers[`REG_F] <= {registers[`REG_F][7:5],1'b1,registers[`REG_F][3:0]};
				end
				`INSN_alu_CCF: begin
					registers[`REG_F] <= {registers[`REG_F][7:5],~registers[`REG_F][4],registers[`REG_F][3:0]};
				end
				endcase
			end
			`INSN_NOP: begin /* NOP! */ end
			`INSN_RST: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	begin /* type F */ end
				2:	begin /* type F */ end
				3:	{registers[`REG_SPH],registers[`REG_SPL]} <=
						{registers[`REG_SPH],registers[`REG_SPL]}-2;
				endcase
			end
			`INSN_RET,`INSN_RETCC: begin
				case (cycle)
				0:	if (opcode[0])	// i.e., not RETCC
						cycle <= 1;	// Skip cycle 1; it gets incremented on the next round.
				1: begin /* Nothing need happen here. */ end
				2:	registers[`REG_PCL] <= rdata;
				3:	registers[`REG_PCH] <= rdata;
				4:	begin
						{registers[`REG_SPH],registers[`REG_SPL]} <=
							{registers[`REG_SPH],registers[`REG_SPL]} + 2;
						if (opcode[4] && opcode[0])	/* RETI */
							ie <= 1;
					end
				endcase
			end
			`INSN_CALL,`INSN_CALLCC: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	tmp <= rdata;	// tmp contains newpcl
				2:	tmp2 <= rdata;	// tmp2 contains newpch
				3:	begin /* type F */ end
				4:	registers[`REG_PCH] <= tmp2;
				5: begin
						{registers[`REG_SPH],registers[`REG_SPL]} <=
							{registers[`REG_SPH],registers[`REG_SPL]} - 2;
						registers[`REG_PCL] <= tmp;
					end
				endcase
			end
			`INSN_JP_imm,`INSN_JPCC_imm: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	tmp <= rdata;	// tmp contains newpcl
				2:	tmp2 <= rdata;	// tmp2 contains newpch
				3:	{registers[`REG_PCH],registers[`REG_PCL]} <=
						{tmp2,tmp};
				endcase
			end
			`INSN_JP_HL: begin
				{registers[`REG_PCH],registers[`REG_PCL]} <=
					{registers[`REG_H],registers[`REG_L]};
			end
			`INSN_JR_imm,`INSN_JRCC_imm: begin
				case (cycle)
				0:	begin /* type F */ end
				1:	tmp <= rdata;
				2: {registers[`REG_PCH],registers[`REG_PCL]} <=
						{registers[`REG_PCH],registers[`REG_PCL]} +
						{tmp[7]?8'hFF:8'h00,tmp};
				endcase
			end
			`INSN_INCDEC16: begin
				case (cycle)
				0:	{tmp,tmp2} <= {tmp,tmp2} +
						(opcode[3] ? 16'hFFFF : 16'h0001);
				1: begin
						case (opcode[5:4])
						`INSN_reg16_BC:	begin
							registers[`REG_B] <= tmp;
							registers[`REG_C] <= tmp2;
						end
						`INSN_reg16_DE:	begin
							registers[`REG_D] <= tmp;
							registers[`REG_E] <= tmp2;
						end
						`INSN_reg16_HL:	begin
							registers[`REG_H] <= tmp;
							registers[`REG_L] <= tmp2;
						end
						`INSN_reg16_SP:	begin
							registers[`REG_SPH] <= tmp;
							registers[`REG_SPL] <= tmp2;
						end
						endcase
					end
				endcase
			end
			`INSN_VOP_INTR: begin
				case (cycle)
				0:	begin end
				1:	begin end
				2:	begin
						ie <= 0;
						{registers[`REG_PCH],registers[`REG_PCL]} <=
							{8'b0,jaddr};
						{registers[`REG_SPH],registers[`REG_SPL]} <=
							{registers[`REG_SPH],registers[`REG_SPL]} - 2;
					end
				endcase
			end
			`INSN_DI: ie <= 0;
			`INSN_EI: iedelay <= 1;
			default:
				$stop;
			endcase
			state <= `STATE_FETCH;
		end
		endcase
endmodule