]> Joshua Wise's Git repositories - firearm.git/blobdiff - system.v
tests: Add the new testbench.
[firearm.git] / system.v
index fdefc545b286668f78b0da4576e26b13c8c37267..1635a34159471ec94291a13d3569e1e5eeecd4e8 100644 (file)
--- a/system.v
+++ b/system.v
@@ -1,5 +1,5 @@
-`define BUS_ICACHE 0
-`define BUS_DCACHE 1
+`define BUS_ICACHE 1
+`define BUS_DCACHE 0
 
 module System(input clk);
        wire [7:0] bus_req;
@@ -12,7 +12,7 @@ module System(input clk);
 
        wire bus_req_icache;
        wire bus_req_dcache;
-       assign bus_req = {6'b0, bus_req_dcache, bus_req_icache};
+       assign bus_req = {6'b0, bus_req_icache, bus_req_dcache};
        wire bus_ack_icache = bus_ack[`BUS_ICACHE];
        wire bus_ack_dcache = bus_ack[`BUS_DCACHE];
        
@@ -46,22 +46,44 @@ module System(input clk);
        wire dcache_rw_wait;
        wire [31:0] dcache_wr_data, dcache_rd_data;
        
-       wire [31:0] decode_out_op0, decode_out_op1, decode_out_op2, decode_out_spsr;
+       wire [31:0] decode_out_op0, decode_out_op1, decode_out_op2, decode_out_spsr, decode_out_cpsr;
        wire decode_out_carry;
        
        wire [3:0] regfile_read_0, regfile_read_1, regfile_read_2, regfile_read_3;
        wire [31:0] regfile_rdata_0, regfile_rdata_1, regfile_rdata_2, regfile_rdata_3, regfile_spsr;
+       wire regfile_write;
+       wire [3:0] regfile_write_reg;
+       wire [31:0] regfile_write_data;
        
        wire execute_out_write_reg;
        wire [3:0] execute_out_write_num;
        wire [31:0] execute_out_write_data;
        wire [31:0] execute_out_op0, execute_out_op1, execute_out_op2;
-       wire [31:0] jmppc;
-       wire jmp;
+       wire [31:0] execute_out_cpsr, execute_out_spsr;
+       
+       wire jmp_out_execute, jmp_out_writeback;
+       wire [31:0] jmppc_out_execute, jmppc_out_writeback;
+       wire jmp = jmp_out_execute | jmp_out_writeback;
+       wire [31:0] jmppc = jmppc_out_execute | jmppc_out_writeback;
        
        wire memory_out_write_reg;
        wire [3:0] memory_out_write_num;
        wire [31:0] memory_out_write_data;
+       wire [31:0] memory_out_cpsr, memory_out_spsr;
+       
+       wire [31:0] writeback_out_cpsr, writeback_out_spsr;
+
+       wire cp_ack_terminal;
+       wire cp_busy_terminal;
+       wire [31:0] cp_read_terminal;
+       
+       wire cp_req;
+       wire [31:0] cp_insn;
+       wire cp_ack = cp_ack_terminal;
+       wire cp_busy = cp_busy_terminal;
+       wire cp_rnw;
+       wire [31:0] cp_read = cp_read_terminal;
+       wire [31:0] cp_write;
        
        wire stall_cause_issue;
        wire stall_cause_execute;
@@ -80,6 +102,7 @@ module System(input clk);
        wire [31:0] pc_out_memory;
 
        wire execute_out_backflush;
+       wire writeback_out_backflush;
 
        BusArbiter busarbiter(.bus_req(bus_req), .bus_ack(bus_ack));
 
@@ -120,53 +143,75 @@ module System(input clk);
        Issue issue(
                .clk(clk),
                .Nrst(1'b1 /* XXX */),
-               .stall(stall_cause_execute), .flush(execute_out_backflush),
+               .stall(stall_cause_execute), .flush(execute_out_backflush | writeback_out_backflush),
                .inbubble(bubble_out_fetch), .insn(insn_out_fetch),
-               .inpc(pc_out_fetch), .cpsr(32'b0 /* XXX */),
+               .inpc(pc_out_fetch), .cpsr(writeback_out_cpsr),
                .outstall(stall_cause_issue), .outbubble(bubble_out_issue),
                .outpc(pc_out_issue), .outinsn(insn_out_issue));
        
        RegFile regfile(
                .clk(clk),
-               .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), .read_2(regfile_read_3),
-               .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2), .rdata_2(regfile_rdata_3),
-               .spsr(regfile_spsr), .write(4'b0), .write_req(1'b0), .write_data(10 /* XXX */));
+               .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), .read_3(regfile_read_3),
+               .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2), .rdata_3(regfile_rdata_3),
+               .spsr(regfile_spsr),
+               .write(regfile_write), .write_reg(regfile_write_reg), .write_data(regfile_write_data));
        
        Decode decode(
                .clk(clk),
-               .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(32'b0 /* XXX */), .inspsr(regfile_spsr),
+               .stall(stall_cause_execute),
+               .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(writeback_out_cpsr), .inspsr(writeback_out_spsr),
                .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2),
-               .carry(decode_out_carry), .outspsr(decode_out_spsr),
+               .carry(decode_out_carry), .outcpsr(decode_out_cpsr), .outspsr(decode_out_spsr),
                .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), 
                .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2));
        
        Execute execute(
                .clk(clk), .Nrst(1'b0),
-               .stall(stall_cause_memory), .flush(1'b0),
+               .stall(stall_cause_memory), .flush(writeback_out_backflush),
                .inbubble(bubble_out_issue), .pc(pc_out_issue), .insn(insn_out_issue),
-               .cpsr(32'b0 /* XXX */), .spsr(decode_out_spsr), .op0(decode_out_op0), .op1(decode_out_op1),
+               .cpsr(decode_out_cpsr), .spsr(decode_out_spsr), .op0(decode_out_op0), .op1(decode_out_op1),
                .op2(decode_out_op2), .carry(decode_out_carry),
                .outstall(stall_cause_execute), .outbubble(bubble_out_execute),
                .write_reg(execute_out_write_reg), .write_num(execute_out_write_num),
                .write_data(execute_out_write_data),
-               .jmp(jmp), .jmppc(jmppc),
+               .jmp(jmp_out_execute), .jmppc(jmppc_out_execute),
                .outpc(pc_out_execute), .outinsn(insn_out_execute),
-               .outop0(execute_out_op0), .outop1(execute_out_op1), .outop2(execute_out_op2));
+               .outop0(execute_out_op0), .outop1(execute_out_op1), .outop2(execute_out_op2),
+               .outcpsr(execute_out_cpsr), .outspsr(execute_out_spsr));
        assign execute_out_backflush = jmp;
        
+       assign cp_insn = insn_out_execute;
        Memory memory(
                .clk(clk), .Nrst(1'b0),
-               /* stall? flush? */
+               /* stall? */ .flush(writeback_out_backflush),
                .busaddr(dcache_addr), .rd_req(dcache_rd_req), .wr_req(dcache_wr_req),
                .rw_wait(dcache_rw_wait), .wr_data(dcache_wr_data), .rd_data(dcache_rd_data),
                .st_read(regfile_read_3), .st_data(regfile_rdata_3),
                .inbubble(bubble_out_execute), .pc(pc_out_execute), .insn(insn_out_execute),
                .op0(execute_out_op0), .op1(execute_out_op1), .op2(execute_out_op2),
+               .spsr(execute_out_spsr), .cpsr(execute_out_cpsr),
                .write_reg(execute_out_write_reg), .write_num(execute_out_write_num), .write_data(execute_out_write_data),
                .outstall(stall_cause_memory), .outbubble(bubble_out_memory), 
                .outpc(pc_out_memory), .outinsn(insn_out_memory),
                .out_write_reg(memory_out_write_reg), .out_write_num(memory_out_write_num), 
-               .out_write_data(memory_out_write_data));
+               .out_write_data(memory_out_write_data),
+               .cp_req(cp_req), .cp_ack(cp_ack), .cp_busy(cp_busy), .cp_rnw(cp_rnw), .cp_read(cp_read), .cp_write(cp_write),
+               .outcpsr(memory_out_cpsr), .outspsr(memory_out_spsr) /* XXX data_size */);
+       
+       Terminal terminal(      
+               .clk(clk),
+               .cp_req(cp_req), .cp_insn(cp_insn), .cp_ack(cp_ack_terminal), .cp_busy(cp_busy_terminal), .cp_rnw(cp_rnw),
+               .cp_read(cp_read_terminal), .cp_write(cp_write));
+       
+       Writeback writeback(
+               .clk(clk),
+               .inbubble(bubble_out_memory),
+               .write_reg(memory_out_write_reg), .write_num(memory_out_write_num), .write_data(memory_out_write_data),
+               .cpsr(memory_out_cpsr), .spsr(memory_out_spsr),
+               .regfile_write(regfile_write), .regfile_write_reg(regfile_write_reg), .regfile_write_data(regfile_write_data),
+               .outcpsr(writeback_out_cpsr), .outspsr(writeback_out_spsr), 
+               .jmp(jmp_out_writeback), .jmppc(jmppc_out_writeback));
+       assign writeback_out_backflush = jmp_out_writeback;
 
        reg [31:0] clockno = 0;
        always @(posedge clk)
@@ -175,8 +220,9 @@ module System(input clk);
                $display("------------------------------------------------------------------------------");
                $display("%3d: FETCH:            Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch);
                $display("%3d: ISSUE:  Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue);
-               $display("%3d: DECODE:                      op1 %08x, op2 %08x, op3 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry);
-               $display("%3d: EXEC:   Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, bubble_out_execute, insn_out_execute, pc_out_execute, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp, jmppc);
+               $display("%3d: DECODE:                      op0 %08x, op1 %08x, op2 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry);
+               $display("%3d: EXEC:   Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, bubble_out_execute, insn_out_execute, pc_out_execute, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp_out_execute, jmppc_out_execute);
                $display("%3d: MEMORY: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d]", clockno, stall_cause_memory, bubble_out_memory, insn_out_memory, pc_out_memory, memory_out_write_reg, memory_out_write_data, memory_out_write_num);
+               $display("%3d: WRITEB:                      CPSR %08x, SPSR %08x, Reg: %d [%08x -> %d], Jmp: %d [%08x]", clockno, writeback_out_cpsr, writeback_out_spsr, regfile_write, regfile_write_data, regfile_write_reg, jmp_out_writeback, jmppc_out_writeback);
        end
 endmodule
This page took 0.031366 seconds and 4 git commands to generate.