reg cache_valid [15:0];
reg [21:0] cache_tags [15:0];
- reg [31:0] cache_data [15:0 /* line */] [15:0 /* word */];
-
- reg [4:0] i;
+ reg [31:0] cache_data [255:0 /* {line,word} */];
+
+ integer i;
initial
for (i = 0; i < 16; i = i + 1)
begin
wire cache_hit = cache_valid[idx] && (cache_tags[idx] == tag);
+ wire [31:0] curdata = cache_data[{idx,didx_word}];
always @(*) begin
rw_wait = (rd_req && !cache_hit) || (wr_req && (!bus_ack || !bus_ready));
- rd_data = cache_data[idx][didx_word];
+ rd_data = curdata;
if (!rw_wait && rd_req)
$display("DCACHE: READ COMPLETE: Addr %08x, data %08x", addr, rd_data);
end
bus_addr = {addr[31:6], cache_fill_pos[3:0], 2'b00 /* reads are 32-bits */};
bus_rd = 1;
end else if (wr_req && bus_ack) begin
- $display("DCACHE: WRITE REQUEST: Addr %08x, data %08x, wait %d", addr, wr_data, rw_wait);
+ $display("DCACHE: WRITE REQUEST: Addr %08x, data %08x", addr, wr_data);
bus_addr = addr;
bus_wr = 1;
bus_wdata = wr_data;
prev_addr <= {addr[31:6], 6'b0};
if (rd_req && (cache_fill_pos != 0) && ((prev_addr != {addr[31:6], 6'b0}) || cache_hit)) /* If this wasn't from the same line, or we've moved on somehow, reset the fill circuitry. */
cache_fill_pos <= 0;
- else if (rd_req && !cache_hit) begin
- if (bus_ready && bus_ack) begin /* Started the fill, and we have data. */
- $display("DCACHE: FILL: rd addr %08x; bus addr %08x; bus data %08x, bus_req %d, bus_ack %d", addr, bus_addr, bus_rdata, bus_req, bus_ack);
- cache_data[idx][cache_fill_pos] <= bus_rdata;
- cache_fill_pos <= cache_fill_pos + 1;
- if (cache_fill_pos == 15) begin /* Done? */
- cache_tags[idx] <= tag;
- cache_valid[idx] <= 1;
- end
- end
- end else if (wr_req && cache_hit)
- cache_data[idx][addr[5:2]] = wr_data;
+ else if (rd_req && !cache_hit && bus_ready && bus_ack) begin /* Started the fill, and we have data. */
+ $display("DCACHE: FILL: rd addr %08x; bus addr %08x; bus data %08x, bus_req %d, bus_ack %d", addr, bus_addr, bus_rdata, bus_req, bus_ack);
+ cache_fill_pos <= cache_fill_pos + 1;
+ if (cache_fill_pos == 15) begin /* Done? */
+ cache_tags[idx] <= tag;
+ cache_valid[idx] <= 1;
+ end else
+ cache_valid[idx] <= 0;
+ end
+
+ /* Split this out because XST is kind of silly about this sort of thing. */
+ if ((rd_req && !cache_hit && bus_ready && bus_ack) || (wr_req && cache_hit))
+ cache_data[wr_req ? {idx,addr[5:2]} : {idx,cache_fill_pos}] <= wr_req ? wr_data : bus_rdata;
end
endmodule