fixed v flag

[firearm.git] / Execute.v

diff --git a/Execute.v b/Execute.v
index d7b4ba6485036b666a5cee9b6c6d0309870c035f..3a21968a02d002aa3977de264acdda951807b4c9 100644 (file)
--- a/Execute.v
+++ b/Execute.v
@@ -16,6 +16,7 @@ module Execute(
        
        output reg outstall = 0,
        output reg outbubble = 1,
        
        output reg outstall = 0,
        output reg outbubble = 1,

+       output reg [31:0] outcpsr = 0,

        output reg write_reg = 1'bx,
        output reg [3:0] write_num = 4'bxxxx,
        output reg [31:0] write_data = 32'hxxxxxxxx
        output reg write_reg = 1'bx,
        output reg [3:0] write_num = 4'bxxxx,
        output reg [31:0] write_data = 32'hxxxxxxxx


@@ -26,10 +27,119 @@ module Execute(
        wire mult_done;
        wire [31:0] mult_result;
        
        wire mult_done;
        wire [31:0] mult_result;
        

+       reg [31:0] alu_in0, alu_in1;
+       reg [3:0] alu_op;
+       reg alu_setflags;
+       wire [31:0] alu_result, alu_outcpsr;
+       wire alu_setres;
+       
+       reg next_outbubble;
+       reg [31:0] next_outcpsr;
+       reg next_write_reg;
+       reg [3:0] next_write_num;
+       reg [31:0] next_write_data;
+       

        Multiplier multiplier(
                .clk(clk), .Nrst(Nrst),
                .start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
                .in1(mult_in1), .done(mult_done), .result(mult_result));
        Multiplier multiplier(
                .clk(clk), .Nrst(Nrst),
                .start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
                .in1(mult_in1), .done(mult_done), .result(mult_result));

+       
+       ALU alu(
+               .clk(clk), .Nrst(Nrst),
+               .in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op),
+               .setflags(alu_setflags), .shifter_carry(carry),
+               .result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres));
+       
+       always @(posedge clk)
+       begin
+               if (!stall)
+               begin
+                       outbubble <= next_outbubble;
+                       outcpsr <= next_outcpsr;
+                       write_reg <= next_write_reg;
+                       write_num <= next_write_num;
+                       write_data <= next_write_data;
+               end
+       end
+
+       reg prevstall = 0;
+       always @(posedge clk)
+               prevstall <= outstall;
+
+       always @(*)
+       begin
+               outstall = stall;
+               next_outbubble = inbubble;
+               next_outcpsr = cpsr;
+               next_write_reg = 0;
+               next_write_num = 4'hx;
+               next_write_data = 32'hxxxxxxxx;
+       
+               mult_start = 0;
+               mult_acc0 = 32'hxxxxxxxx;
+               mult_in0 = 32'hxxxxxxxx;
+               mult_in1 = 32'hxxxxxxxx;
+       
+               alu_in0 = 32'hxxxxxxxx;
+               alu_in1 = 32'hxxxxxxxx;
+               alu_op = 4'hx;  /* hax! */
+               alu_setflags = 1'bx;
+               
+               casez (insn)
+               `DECODE_ALU_MULT:       /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+               begin
+                       if (!prevstall && !inbubble)
+                       begin
+                               mult_start = 1;
+                               mult_acc0 = insn[21] /* A */ ? op0 /* Rn */ : 32'h0;
+                               mult_in0 = op1 /* Rm */;
+                               mult_in1 = op2 /* Rs */;
+                               $display("New MUL instruction");
+                       end
+                       outstall = stall | ((!prevstall | !mult_done) && !inbubble);
+                       next_outbubble = inbubble | !mult_done | !prevstall;
+                       next_outcpsr = insn[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr[28] /* V */, cpsr[27:0]} : cpsr;
+                       next_write_reg = 1;
+                       next_write_num = insn[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
+                       next_write_data = mult_result;
+               end
+//             `DECODE_ALU_MUL_LONG,   /* Multiply long */
+               `DECODE_ALU_MRS,        /* MRS (Transfer PSR to register) */
+               `DECODE_ALU_MSR,        /* MSR (Transfer register to PSR) */
+               `DECODE_ALU_MSR_FLAGS,  /* MSR (Transfer register or immediate to PSR, flag bits only) */
+               `DECODE_ALU_SWP,        /* Atomic swap */
+               `DECODE_ALU_BX,         /* Branch */
+               `DECODE_ALU_HDATA_REG,  /* Halfword transfer - register offset */
+               `DECODE_ALU_HDATA_IMM:  /* Halfword transfer - immediate offset */
+               begin end
+               `DECODE_ALU:            /* ALU */
+               begin
+                       alu_in0 = op0;
+                       alu_in1 = op1;
+                       alu_op = insn[24:21];
+                       alu_setflags = insn[20] /* I */;
+                       
+                       if (alu_setres) begin
+                               next_write_reg = 1;
+                               next_write_num = insn[15:12] /* Rd */;
+                               next_write_data = alu_result;
+                       end
+                       
+                       next_outcpsr = alu_outcpsr;
+               end
+               `DECODE_LDRSTR_UNDEFINED,       /* Undefined. I hate ARM */
+               `DECODE_LDRSTR,         /* Single data transfer */
+               `DECODE_LDMSTM,         /* Block data transfer */
+               `DECODE_BRANCH,         /* Branch */
+               `DECODE_LDCSTC,         /* Coprocessor data transfer */
+               `DECODE_CDP,            /* Coprocessor data op */
+               `DECODE_MRCMCR,         /* Coprocessor register transfer */
+               `DECODE_SWI:            /* SWI */
+               begin end
+               default:                /* X everything else out */
+               begin end
+               endcase
+       end

 endmodule
 
 module Multiplier(
 endmodule
 
 module Multiplier(


@@ -68,3 +178,125 @@ module Multiplier(
                end
        end
 endmodule
                end
        end
 endmodule

+
+module ALU(
+       input clk,
+       input Nrst,     /* XXX not used yet */
+
+       input [31:0] in0,
+       input [31:0] in1,
+       input [31:0] cpsr,
+       input [3:0] op,
+       input setflags,
+       input shifter_carry,
+
+       output reg [31:0] result,
+       output reg [31:0] cpsr_out,
+       output reg setres
+);
+       wire [31:0] res;
+       wire flag_n, flag_z, flag_c, flag_v, setres;
+       wire [32:0] sum, diff, rdiff;
+       wire sum_v, diff_v, rdiff_v;
+
+       assign sum = {1'b0, in0} + {1'b0, in1};
+       assign diff = {1'b0, in0} - {1'b0, in1};
+       assign rdiff = {1'b0, in1} + {1'b0, in0};
+       assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
+       assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
+       assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);
+
+       always @(*) begin
+               res = 32'hxxxxxxxx;
+               setres = 1'bx;
+               flag_c = cpsr[`CPSR_C];
+               flag_v = cpsr[`CPSR_V];
+               case(op)
+               `ALU_AND: begin
+                       result = in0 & in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b1;
+               end
+               `ALU_EOR: begin
+                       result = in0 ^ in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b1;
+               end
+               `ALU_SUB: begin
+                       {flag_c, result} = diff;
+                       flag_v = diff_v;
+                       setres = 1'b1;
+               end
+               `ALU_RSB: begin
+                       {flag_c, result} = rdiff;
+                       flag_v = rdiff_v;
+                       setres = 1'b1;
+               end
+               `ALU_ADD: begin
+                       {flag_c, result} = sum;
+                       flag_v = sum_v;
+                       setres = 1'b1;
+               end
+               `ALU_ADC: begin
+                       {flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
+                       flag_v = sum_v | (~sum[31] & result[31]);
+                       setres = 1'b1;
+               end
+               `ALU_SBC: begin
+                       {flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
+                       flag_v = diff_v | (diff[31] & ~result[31]);
+                       setres = 1'b1;
+               end
+               `ALU_RSC: begin
+                       {flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
+                       flag_v = rdiff_v | (rdiff[31] & ~result[31]);
+                       setres = 1'b1;
+               end
+               `ALU_TST: begin
+                       result = in0 & in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b0;
+               end
+               `ALU_TEQ: begin
+                       result = in0 ^ in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b0;
+               end
+               `ALU_CMP: begin
+                       {flag_c, result} = diff;
+                       flag_v = diff_v;
+                       setres = 1'b0;
+               end
+               `ALU_CMN: begin
+                       {flag_c, result} = sum;
+                       flag_v = sum_v;
+                       setres = 1'b0;
+               end
+               `ALU_ORR: begin
+                       result = in0 | in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b1;
+               end
+               `ALU_MOV: begin
+                       result = in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b1;
+               end
+               `ALU_BIC: begin
+                       result = in0 & (~in1);
+                       flag_c = shifter_carry;
+                       setres = 1'b1;
+               end
+               `ALU_MVN: begin
+                       result = ~in1;
+                       flag_c = shifter_carry;
+                       setres = 1'b1;
+               end
+               endcase
+               
+               flag_z = (result == 0);
+               flag_n = result[31];
+               
+               cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
+       end
+endmodule