]> Joshua Wise's Git repositories - firearm.git/blobdiff - Memory.v
Global: More re-piping, and a bugfix for a bug recently introduced. (Regressions...
[firearm.git] / Memory.v
index cb1f74f4075ef51c33568828ae24c4499a8d0cba..1dad548ca37102323ef0b7d845a78dc1f490a8f6 100644 (file)
--- a/Memory.v
+++ b/Memory.v
@@ -109,8 +109,6 @@ module Memory(
                out_write_reg <= next_write_reg;
                out_write_num <= next_write_num;
                out_write_data <= next_write_data;
-               regs <= next_regs;
-               prev_reg <= cur_reg;
                if (!rw_wait)
                        prev_offset <= offset;
                prev_raddr <= raddr;
@@ -123,6 +121,7 @@ module Memory(
                lsrh_state <= next_lsrh_state;
                if (do_rd_data_latch)
                        rd_data_latch <= rd_data;
+               swp_oldval <= next_swp_oldval;
                prevaddr <= addr;
        end
        
@@ -162,7 +161,10 @@ module Memory(
                        end
                        endcase
                end
-               `DECODE_ALU_MULT: begin end
+               `DECODE_ALU_MULT: begin
+                       outstall = 1'b0;        /* XXX work around for Xilinx bug */
+                       next_lsrh_state = lsrh_state;
+               end
                `DECODE_ALU_HDATA_REG,
                `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
                        case(lsrh_state)
@@ -256,11 +258,11 @@ module Memory(
                        end
                        `LSM_MEMIO: begin
                                outstall = 1'b1;
-                               if(next_regs == 16'b0) begin
+                               if(next_regs == 16'b0 && !rw_wait) begin
                                        next_lsm_state = `LSM_BASEWB;
                                end
                                
-                               $display("LDMSTM: Stage 2: Writing: regs %b, next_regs %b, reg %d, wr_data %08x, addr %08x", regs, next_regs, cur_reg, wr_data, busaddr);
+                               $display("LDMSTM: Stage 2: Writing: regs %b, next_regs %b, reg %d, wr_data %08x, addr %08x", regs, next_regs, cur_reg, st_data, busaddr);
                        end
                        `LSM_BASEWB: begin
                                outstall = 1;
@@ -285,61 +287,61 @@ module Memory(
                        if (cp_busy) begin
                                outstall = 1;
                        end
+                       if (!cp_ack) begin
+                               /* XXX undefined instruction trap */
+                               $display("WARNING: Possible CDP undefined instruction");
+                       end
                end
                `DECODE_MRCMCR: if (!inbubble) begin
                        if (cp_busy) begin
                                outstall = 1;
                        end
+                       if (!cp_ack) begin
+                               $display("WARNING: Possible MRCMCR undefined instruction: cp_ack %d, cp_busy %d",cp_ack, cp_busy);
+                       end
                        $display("MRCMCR: ack %d, busy %d", cp_ack, cp_busy);
                end
                default: begin end
                endcase
        end
-
+       
+       /* Coprocessor input. */
+       always @(*)
+       begin
+               cp_req = 0;
+               cp_rnw = 1'bx;
+               cp_write = 32'hxxxxxxxx;
+               casez (insn)
+               `DECODE_CDP: if(!inbubble) begin
+                       cp_req = 1;
+               end
+               `DECODE_MRCMCR: if(!inbubble) begin
+                       cp_req = 1;
+                       cp_rnw = insn[20] /* L */;
+                       if (insn[20] == 0 /* store to coprocessor */)
+                               cp_write = op0;
+               end
+               endcase
+       end
+       
+       /* Register output logic. */
        always @(*)
        begin
-               addr = prevaddr;
-               raddr = 32'hxxxxxxxx;
-               rd_req = 1'b0;
-               wr_req = 1'b0;
-               wr_data = 32'hxxxxxxxx;
-               busaddr = 32'hxxxxxxxx;
-               data_size = 3'bxxx;
-               st_read = 4'hx;
-               do_rd_data_latch = 0;
                next_write_reg = write_reg;
                next_write_num = write_num;
                next_write_data = write_data;
-               next_outbubble = inbubble;
-               next_regs = regs;
-               cp_req = 1'b0;
-               cp_rnw = 1'bx;
-               cp_write = 32'hxxxxxxxx;
-               offset = prev_offset;
                next_outcpsr = lsm_state == 4'b0010 ? outcpsr : cpsr;
                next_outcpsrup = cpsrup;
-               lsrh_rddata = 32'hxxxxxxxx;
-               lsrh_rddata_s1 = 16'hxxxx;
-               lsrh_rddata_s2 = 8'hxx;
-               next_swp_oldval = swp_oldval;
-               cur_reg = prev_reg;
-
-               /* XXX shit not given about endianness */
+               
                casez(insn)
-               `DECODE_ALU_SWP: if(!inbubble) begin
-                       next_outbubble = rw_wait;
-                       busaddr = {op0[31:2], 2'b0};
-                       data_size = insn[22] ? 3'b001 : 3'b100;
+               `DECODE_ALU_SWP: if (!inbubble) begin
+                       next_write_reg = 1'bx;
+                       next_write_num = 4'bxxxx;
+                       next_write_data = 32'hxxxxxxxx;
                        case(swp_state)
-                       `SWP_READING: begin
-                               rd_req = 1'b1;
-                               if(!rw_wait) begin
-                                       next_swp_oldval = rd_data;
-                               end
-                       end
+                       `SWP_READING:
+                               next_write_reg = 1'b0;
                        `SWP_WRITING: begin
-                               wr_req = 1'b1;
-                               wr_data = insn[22] ? {4{op1[7:0]}} : op1;
                                next_write_reg = 1'b1;
                                next_write_num = insn[15:12];
                                next_write_data = insn[22] ? {24'b0, swp_oldval[7:0]} : swp_oldval;
@@ -347,127 +349,272 @@ module Memory(
                        default: begin end
                        endcase
                end
-               `DECODE_ALU_MULT: begin end
+               `DECODE_ALU_MULT: begin
+                       next_write_reg = write_reg;     /* XXX workaround for ISE 10.1 bug */
+                       next_write_num = write_num;
+                       next_write_data = write_data;
+                       next_outcpsr = lsm_state == 4'b0010 ? outcpsr : cpsr;
+                       next_outcpsrup = cpsrup;
+               end
+               `DECODE_ALU_HDATA_REG,
+               `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
+                       next_write_reg = 1'bx;
+                       next_write_num = 4'bxxxx;
+                       next_write_data = 32'hxxxxxxxx;
+                       case(lsrh_state)
+                       `LSRH_MEMIO: begin
+                               next_write_num = insn[15:12];
+                               next_write_data = lsrh_rddata;
+                               if(insn[20]) begin
+                                       next_write_reg = 1'b1;
+                               end
+                       end
+                       `LSRH_BASEWB: begin
+                               next_write_reg = 1'b1;
+                               next_write_num = insn[19:16];
+                               next_write_data = addr;
+                       end
+                       `LSRH_WBFLUSH:
+                               next_write_reg = 1'b0;
+                       default: begin end
+                       endcase
+               end
+               `DECODE_LDRSTR_UNDEFINED: begin end
+               `DECODE_LDRSTR: if(!inbubble) begin
+                       next_write_reg = 1'bx;
+                       next_write_num = 4'bxxxx;
+                       next_write_data = 32'hxxxxxxxx;
+                       case(lsr_state)
+                       `LSR_MEMIO: begin
+                               next_write_reg = insn[20] /* L */;
+                               next_write_num = insn[15:12];
+                               if(insn[20] /* L */) begin
+                                       next_write_data = insn[22] /* B */ ? {24'h0, align_rddata[7:0]} : align_rddata;
+                               end
+                       end
+                       `LSR_STRB_WR:
+                               next_write_reg = 1'b0;
+                       `LSR_BASEWB: begin
+                               next_write_reg = 1'b1;
+                               next_write_num = insn[19:16];
+                               next_write_data = addr;
+                       end
+                       `LSR_WBFLUSH:
+                               next_write_reg = 1'b0;
+                       default: begin end
+                       endcase
+               end
+               `DECODE_LDMSTM: if(!inbubble) begin
+                       next_write_reg = 1'bx;
+                       next_write_num = 4'bxxxx;
+                       next_write_data = 32'hxxxxxxxx;
+                       case(lsm_state)
+                       `LSM_SETUP:
+                               next_write_reg = 1'b0;
+                       `LSM_MEMIO: begin
+                               if(insn[20] /* L */) begin
+                                       next_write_reg = !rw_wait;
+                                       next_write_num = cur_reg;
+                                       next_write_data = rd_data;
+                               end else
+                                       next_write_reg = 1'b0;
+                       end
+                       `LSM_BASEWB: begin
+                               next_write_reg = insn[21] /* writeback */;
+                               next_write_num = insn[19:16];
+                               next_write_data = insn[23] ? op0 + {26'b0, prev_offset} : op0 - {26'b0, prev_offset};
+                               if(cur_reg == 4'hF && insn[22]) begin
+                                       next_outcpsr = spsr;
+                                       next_outcpsrup = 1;
+                               end
+                       end
+                       `LSM_WBFLUSH:
+                               next_write_reg = 1'b0;
+                       default: begin end
+                       endcase
+               end
+               `DECODE_MRCMCR: if(!inbubble) begin
+                       next_write_reg = 1'bx;
+                       next_write_num = 4'bxxxx;
+                       next_write_data = 32'hxxxxxxxx;
+                       next_outcpsr = 32'hxxxxxxxx;
+                       next_outcpsrup = 1'bx;
+                       if (insn[20] == 1 /* load from coprocessor */)
+                               if (insn[15:12] != 4'hF /* Fuck you ARM */) begin
+                                       next_write_reg = 1'b1;
+                                       next_write_num = insn[15:12];
+                                       next_write_data = cp_read;
+                               end else begin
+                                       next_outcpsr = {cp_read[31:28], cpsr[27:0]};
+                                       next_outcpsrup = 1;
+                               end
+               end
+               endcase
+       end
+       
+       /* Bus/address control logic. */
+       always @(*)
+       begin
+               rd_req = 1'b0;
+               wr_req = 1'b0;
+               offset = prev_offset;
+               addr = prevaddr;
+               raddr = 32'hxxxxxxxx;
+               busaddr = 32'hxxxxxxxx;
+               data_size = 3'bxxx;
+               
+               casez(insn)
+               `DECODE_ALU_SWP: if(!inbubble) begin
+                       busaddr = {op0[31:2], 2'b0};
+                       data_size = insn[22] ? 3'b001 : 3'b100;
+                       case(swp_state)
+                       `SWP_READING:
+                               rd_req = 1'b1;
+                       `SWP_WRITING:
+                               wr_req = 1'b1;
+                       default: begin end
+                       endcase
+               end
+               `DECODE_ALU_MULT: begin
+                       rd_req = 1'b0;  /* XXX workaround for Xilinx bug */
+                       wr_req = 1'b0;
+                       offset = prev_offset;
+                       addr = prevaddr;
+               end
                `DECODE_ALU_HDATA_REG,
                `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
-                       next_outbubble = rw_wait;
                        addr = insn[23] ? op0 + op1 : op0 - op1; /* up/down select */
                        raddr = insn[24] ? op0 : addr; /* pre/post increment */
                        busaddr = raddr;
                        /* rotate to correct position */
                        case(insn[6:5])
-                       2'b01: begin /* unsigned half */
-                               wr_data = {2{op2[15:0]}}; /* XXX need to store halfword */
+                       2'b01: /* unsigned half */
                                data_size = 3'b010;
-                               lsrh_rddata = {16'b0, raddr[1] ? rd_data[31:16] : rd_data[15:0]};
-                       end
-                       2'b10: begin /* signed byte */
-                               wr_data = {4{op2[7:0]}};
+                       2'b10: /* signed byte */
                                data_size = 3'b001;
-                               lsrh_rddata_s1 = raddr[1] ? rd_data[31:16] : rd_data[15:0];
-                               lsrh_rddata_s2 = raddr[0] ? lsrh_rddata_s1[15:8] : lsrh_rddata_s1[7:0];
-                               lsrh_rddata = {{24{lsrh_rddata_s2[7]}}, lsrh_rddata_s2};
-                       end
-                       2'b11: begin /* signed half */
-                               wr_data = {2{op2[15:0]}};
+                       2'b11: /* signed half */
                                data_size = 3'b010;
-                               lsrh_rddata = raddr[1] ? {{16{rd_data[31]}}, rd_data[31:16]} : {{16{rd_data[15]}}, rd_data[15:0]};
-                       end
                        default: begin
-                               wr_data = 32'hxxxxxxxx;
                                data_size = 3'bxxx;
-                               lsrh_rddata = 32'hxxxxxxxx;
                        end
                        endcase
-
+                       
                        case(lsrh_state)
                        `LSRH_MEMIO: begin
                                rd_req = insn[20];
                                wr_req = ~insn[20];
-                               next_write_num = insn[15:12];
-                               next_write_data = lsrh_rddata;
-                               if(insn[20]) begin
-                                       next_write_reg = 1'b1;
-                               end
-                       end
-                       `LSRH_BASEWB: begin
-                               next_outbubble = 1'b0;
-                               next_write_reg = 1'b1;
-                               next_write_num = insn[19:16];
-                               next_write_data = addr;
-                       end
-                       `LSRH_WBFLUSH: begin
                        end
+                       `LSRH_BASEWB: begin end
+                       `LSRH_WBFLUSH: begin end
                        default: begin end
                        endcase
                end
                `DECODE_LDRSTR_UNDEFINED: begin end
                `DECODE_LDRSTR: if(!inbubble) begin
-                       next_outbubble = rw_wait;
                        addr = insn[23] ? op0 + op1 : op0 - op1; /* up/down select */
                        raddr = insn[24] ? addr : op0; /* pre/post increment */
                        busaddr = raddr;
-                       /* rotate to correct position */
-                       align_s1 = raddr[1] ? {rd_data[15:0], rd_data[31:16]} : rd_data;
-                       align_s2 = raddr[0] ? {align_s1[7:0], align_s1[31:8]} : align_s1;
-                       /* select byte or word */
-                       align_rddata = insn[22] ? {24'b0, align_s2[7:0]} : align_s2;
-                       wr_data = insn[22] ? {24'h0, {op2[7:0]}} : op2;
                        data_size = insn[22] ? 3'b001 : 3'b100;
-                       case(lsr_state)
+                       case (lsr_state)
                        `LSR_MEMIO: begin
                                rd_req = insn[20] /* L */ || insn[22] /* B */;
                                wr_req = !insn[20] /* L */ && !insn[22]/* B */;
-                               next_write_reg = insn[20] /* L */;
-                               next_write_num = insn[15:12];
-                               if(insn[20] /* L */) begin
-                                       next_write_data = insn[22] /* B */ ? {24'h0, align_rddata[7:0]} : align_rddata;
-                               end
-                               if (insn[22] /* B */ && !insn[20] /* L */) begin
-                                       do_rd_data_latch = 1;
-                               end
                        end
-                       `LSR_STRB_WR: begin
-                               rd_req = 0;
+                       `LSR_STRB_WR:
                                wr_req = 1;
-                               next_write_reg = 0;
+                       `LSR_BASEWB: begin end
+                       `LSR_WBFLUSH: begin end
+                       default: begin end
+                       endcase
+               end
+               `DECODE_LDMSTM: if (!inbubble) begin
+                       data_size = 3'b100;
+                       case (lsm_state)
+                       `LSM_SETUP:
+                               offset = 6'b0;
+                       `LSM_MEMIO: begin
+                               rd_req = insn[20];
+                               wr_req = ~insn[20];
+                               offset = prev_offset + 6'h4;
+                               offset_sel = insn[24] ? offset : prev_offset;
+                               raddr = insn[23] ? op0 + {26'b0, offset_sel} : op0 - {26'b0, offset_sel};
+                               busaddr = raddr;
+                       end
+                       `LSM_BASEWB: begin end
+                       `LSM_WBFLUSH: begin end
+                       default: begin end
+                       endcase
+               end
+               `DECODE_LDCSTC: begin end
+               `DECODE_CDP: begin end
+               `DECODE_MRCMCR: begin end
+               default: begin end
+               endcase
+       end
+       
+       /* Bus data control logic. */
+       always @(*)
+       begin
+               wr_data = 32'hxxxxxxxx;
+               
+               casez(insn)
+               `DECODE_ALU_SWP: if(!inbubble)
+                       if (swp_state == `SWP_WRITING)
+                               wr_data = insn[22] ? {4{op1[7:0]}} : op1;
+               `DECODE_ALU_MULT: begin end
+               `DECODE_ALU_HDATA_REG,
+               `DECODE_ALU_HDATA_IMM: if(!inbubble)
+                       case(insn[6:5])
+                       2'b01: /* unsigned half */
+                               wr_data = {2{op2[15:0]}}; /* XXX need to store halfword */
+                       2'b10: /* signed byte */
+                               wr_data = {4{op2[7:0]}};
+                       2'b11: /* signed half */
+                               wr_data = {2{op2[15:0]}};
+                       default: begin end
+                       endcase
+               `DECODE_LDRSTR_UNDEFINED: begin end
+               `DECODE_LDRSTR: if(!inbubble) begin
+                       wr_data = insn[22] ? {24'h0, {op2[7:0]}} : op2;
+                       if (lsr_state == `LSR_STRB_WR)
                                case (busaddr[1:0])
                                2'b00: wr_data = {rd_data_latch[31:8], op2[7:0]};
                                2'b01: wr_data = {rd_data_latch[31:16], op2[7:0], rd_data_latch[7:0]};
                                2'b10: wr_data = {rd_data_latch[31:24], op2[7:0], rd_data_latch[15:0]};
                                2'b11: wr_data = {op2[7:0], rd_data_latch[23:0]};
                                endcase
-                       end
-                       `LSR_BASEWB: begin
-                               rd_req = 0;
-                               wr_req = 0;
-                               next_outbubble = 0;
-                               next_write_reg = 1'b1;
-                               next_write_num = insn[19:16];
-                               next_write_data = addr;
-                       end
-                       `LSR_WBFLUSH: begin
-                               rd_req = 0;
-                               wr_req = 0;
-                       end
-                       default: begin end
-                       endcase
                end
-               /* XXX ldm/stm incorrect in that stupid case where one of the listed regs is the base reg */
+               `DECODE_LDMSTM: if (!inbubble)
+                       if (lsm_state == `LSM_MEMIO)
+                               wr_data = (cur_reg == 4'hF) ? (pc + 12) : st_data;
+               `DECODE_LDCSTC: begin end
+               `DECODE_CDP: begin end
+               `DECODE_MRCMCR: begin end
+               default: begin end
+               endcase
+       end
+       
+       /* LDM/STM register control logic. */
+       always @(posedge clk)
+               if (!rw_wait || lsm_state != `LSM_MEMIO)
+               begin
+                       prev_reg <= cur_reg;
+                       regs <= next_regs;
+               end
+       
+       always @(*)
+       begin
+               st_read = 4'hx;
+               cur_reg = prev_reg;
+               next_regs = regs;
+               
+               casez(insn)
                `DECODE_LDMSTM: if(!inbubble) begin
-                       next_outbubble = rw_wait;
-                       data_size = 3'b100;
                        case(lsm_state)
-                       `LSM_SETUP: begin
-//                             next_regs = insn[23] ? op1[15:0] : op1[0:15];
-                               /** verilator can suck my dick */
+                       `LSM_SETUP:
                                next_regs = insn[23] /* U */ ? op1[15:0] : {op1[0], op1[1], op1[2], op1[3], op1[4], op1[5], op1[6], op1[7],
                                                                            op1[8], op1[9], op1[10], op1[11], op1[12], op1[13], op1[14], op1[15]};
-                               offset = 6'b0;
-                       end
                        `LSM_MEMIO: begin
-                               rd_req = insn[20];
-                               wr_req = ~insn[20];
                                casez(regs)
                                16'b???????????????1: begin
                                        cur_reg = 4'h0;
@@ -539,70 +686,118 @@ module Memory(
                                end
                                endcase
                                cur_reg = insn[23] ? cur_reg : 4'hF - cur_reg;
-                               if(cur_reg == 4'hF && insn[22]) begin
-                                       next_outcpsr = spsr;
-                                       next_outcpsrup = 1;
-                               end
-
-                               offset = prev_offset + 6'h4;
-                               offset_sel = insn[24] ? offset : prev_offset;
-                               raddr = insn[23] ? op0 + {26'b0, offset_sel} : op0 - {26'b0, offset_sel};
-                               if(insn[20]) begin
-                                       next_write_reg = !rw_wait;
-                                       next_write_num = cur_reg;
-                                       next_write_data = rd_data;
-                               end
-                               if (rw_wait) begin
-                                       next_regs = regs;
-                                       cur_reg = prev_reg;     /* whoops, do this one again */
-                               end
-
+                               
                                st_read = cur_reg;
-                               wr_data = (cur_reg == 4'hF) ? (pc + 12) : st_data;
-                               busaddr = raddr;
                        end
-                       `LSM_BASEWB: begin
-                               next_outbubble = 0;
-                               next_write_reg = insn[21] /* writeback */;
-                               next_write_num = insn[19:16];
-                               next_write_data = insn[23] ? op0 + {26'b0, prev_offset} : op0 - {26'b0, prev_offset};
+                       `LSM_BASEWB: begin end
+                       `LSM_WBFLUSH: begin end
+                       default: begin end
+                       endcase
+               end
+               endcase
+       end
+       
+       always @(*)
+       begin
+               do_rd_data_latch = 0;
+               
+               next_outbubble = inbubble;
+               
+               lsrh_rddata = 32'hxxxxxxxx;
+               lsrh_rddata_s1 = 16'hxxxx;
+               lsrh_rddata_s2 = 8'hxx;
+               next_swp_oldval = swp_oldval;
+               
+               align_s1 = 32'hxxxxxxxx;
+               align_s2 = 32'hxxxxxxxx;
+               align_rddata = 32'hxxxxxxxx;
+
+               /* XXX shit not given about endianness */
+               casez(insn)
+               `DECODE_ALU_SWP: if(!inbubble) begin
+                       next_outbubble = rw_wait;
+                       case(swp_state)
+                       `SWP_READING:
+                               if(!rw_wait)
+                                       next_swp_oldval = rd_data;
+                       `SWP_WRITING: begin end
+                       default: begin end
+                       endcase
+               end
+               `DECODE_ALU_MULT: begin
+                       next_outbubble = inbubble;      /* XXX workaround for Xilinx bug */
+               end
+               `DECODE_ALU_HDATA_REG,
+               `DECODE_ALU_HDATA_IMM: if(!inbubble) begin
+                       next_outbubble = rw_wait;
+                       
+                       /* rotate to correct position */
+                       case(insn[6:5])
+                       2'b01: begin /* unsigned half */
+                               lsrh_rddata = {16'b0, raddr[1] ? rd_data[31:16] : rd_data[15:0]};
+                       end
+                       2'b10: begin /* signed byte */
+                               lsrh_rddata_s1 = raddr[1] ? rd_data[31:16] : rd_data[15:0];
+                               lsrh_rddata_s2 = raddr[0] ? lsrh_rddata_s1[15:8] : lsrh_rddata_s1[7:0];
+                               lsrh_rddata = {{24{lsrh_rddata_s2[7]}}, lsrh_rddata_s2};
+                       end
+                       2'b11: begin /* signed half */
+                               lsrh_rddata = raddr[1] ? {{16{rd_data[31]}}, rd_data[31:16]} : {{16{rd_data[15]}}, rd_data[15:0]};
                        end
+                       default: begin
+                               lsrh_rddata = 32'hxxxxxxxx;
+                       end
+                       endcase
+
+                       case(lsrh_state)
+                       `LSRH_MEMIO: begin end
+                       `LSRH_BASEWB:
+                               next_outbubble = 1'b0;
+                       `LSRH_WBFLUSH: begin end
+                       default: begin end
+                       endcase
+               end
+               `DECODE_LDRSTR_UNDEFINED: begin end
+               `DECODE_LDRSTR: if(!inbubble) begin
+                       next_outbubble = rw_wait;
+                       /* rotate to correct position */
+                       align_s1 = raddr[1] ? {rd_data[15:0], rd_data[31:16]} : rd_data;
+                       align_s2 = raddr[0] ? {align_s1[7:0], align_s1[31:8]} : align_s1;
+                       /* select byte or word */
+                       align_rddata = insn[22] ? {24'b0, align_s2[7:0]} : align_s2;
+                       case(lsr_state)
+                       `LSR_MEMIO:
+                               if (insn[22] /* B */ && !insn[20] /* L */)
+                                       do_rd_data_latch = 1;
+                       `LSR_STRB_WR: begin end
+                       `LSR_BASEWB:
+                               next_outbubble = 0;
+                       `LSR_WBFLUSH: begin end
+                       default: begin end
+                       endcase
+               end
+               /* XXX ldm/stm incorrect in that stupid case where one of the listed regs is the base reg */
+               `DECODE_LDMSTM: if(!inbubble) begin
+                       next_outbubble = rw_wait;
+                       case(lsm_state)
+                       `LSM_SETUP: begin end
+                       `LSM_MEMIO: begin end
+                       `LSM_BASEWB:
+                               next_outbubble = 0;
                        `LSM_WBFLUSH: begin end
                        default: $stop;
                        endcase
                end
                `DECODE_LDCSTC: begin end
                `DECODE_CDP: if(!inbubble) begin
-                       cp_req = 1;
                        if (cp_busy) begin
                                next_outbubble = 1;
                        end
-                       if (!cp_ack) begin
-                               /* XXX undefined instruction trap */
-                               $display("WARNING: Possible CDP undefined instruction");
-                       end
                end
                `DECODE_MRCMCR: if(!inbubble) begin
-                       cp_req = 1;
-                       cp_rnw = insn[20] /* L */;
-                       if (insn[20] == 0 /* store to coprocessor */)
-                               cp_write = op0;
-                       else begin
-                               if (insn[15:12] != 4'hF /* Fuck you ARM */) begin
-                                       next_write_reg = 1'b1;
-                                       next_write_num = insn[15:12];
-                                       next_write_data = cp_read;
-                               end else begin
-                                       next_outcpsr = {cp_read[31:28], cpsr[27:0]};
-                                       next_outcpsrup = 1;
-                               end
-                       end
                        if (cp_busy) begin
                                next_outbubble = 1;
                        end
-                       if (!cp_ack) begin
-                               $display("WARNING: Possible MRCMCR undefined instruction: cp_ack %d, cp_busy %d",cp_ack, cp_busy);
-                       end
                end
                default: begin end
                endcase
This page took 0.044108 seconds and 4 git commands to generate.