Memory: Fix the case where a LDM/LDR/LDRH/STM/STR/STRH would not get rejected if...

[firearm.git] / system.v

diff --git a/system.v b/system.v
index d7fc62cea3631c4664160373c32875a77fb2f816..1635a34159471ec94291a13d3569e1e5eeecd4e8 100644 (file)
--- a/system.v
+++ b/system.v
@@ -1,5 +1,5 @@
-`define BUS_ICACHE 0
-`define BUS_DCACHE 1
+`define BUS_ICACHE 1
+`define BUS_DCACHE 0

 
 module System(input clk);
        wire [7:0] bus_req;
 
 module System(input clk);
        wire [7:0] bus_req;


@@ -12,7 +12,7 @@ module System(input clk);
 
        wire bus_req_icache;
        wire bus_req_dcache;
 
        wire bus_req_icache;
        wire bus_req_dcache;

-       assign bus_req = {6'b0, bus_req_dcache, bus_req_icache};
+       assign bus_req = {6'b0, bus_req_icache, bus_req_dcache};

        wire bus_ack_icache = bus_ack[`BUS_ICACHE];
        wire bus_ack_dcache = bus_ack[`BUS_DCACHE];
        
        wire bus_ack_icache = bus_ack[`BUS_ICACHE];
        wire bus_ack_dcache = bus_ack[`BUS_DCACHE];
        


@@ -151,13 +151,14 @@ module System(input clk);
        
        RegFile regfile(
                .clk(clk),
        
        RegFile regfile(
                .clk(clk),

-               .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), .read_2(regfile_read_3),
-               .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2), .rdata_2(regfile_rdata_3),
+               .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), .read_3(regfile_read_3),
+               .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2), .rdata_3(regfile_rdata_3),

                .spsr(regfile_spsr),
                .write(regfile_write), .write_reg(regfile_write_reg), .write_data(regfile_write_data));
        
        Decode decode(
                .clk(clk),
                .spsr(regfile_spsr),
                .write(regfile_write), .write_reg(regfile_write_reg), .write_data(regfile_write_data));
        
        Decode decode(
                .clk(clk),

+               .stall(stall_cause_execute),

                .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(writeback_out_cpsr), .inspsr(writeback_out_spsr),
                .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2),
                .carry(decode_out_carry), .outcpsr(decode_out_cpsr), .outspsr(decode_out_spsr),
                .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(writeback_out_cpsr), .inspsr(writeback_out_spsr),
                .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2),
                .carry(decode_out_carry), .outcpsr(decode_out_cpsr), .outspsr(decode_out_spsr),


@@ -195,7 +196,7 @@ module System(input clk);
                .out_write_reg(memory_out_write_reg), .out_write_num(memory_out_write_num), 
                .out_write_data(memory_out_write_data),
                .cp_req(cp_req), .cp_ack(cp_ack), .cp_busy(cp_busy), .cp_rnw(cp_rnw), .cp_read(cp_read), .cp_write(cp_write),
                .out_write_reg(memory_out_write_reg), .out_write_num(memory_out_write_num), 
                .out_write_data(memory_out_write_data),
                .cp_req(cp_req), .cp_ack(cp_ack), .cp_busy(cp_busy), .cp_rnw(cp_rnw), .cp_read(cp_read), .cp_write(cp_write),

-               .outcpsr(memory_out_cpsr), .outspsr(memory_out_spsr));
+               .outcpsr(memory_out_cpsr), .outspsr(memory_out_spsr) /* XXX data_size */);

        
        Terminal terminal(      
                .clk(clk),
        
        Terminal terminal(      
                .clk(clk),


@@ -219,8 +220,8 @@ module System(input clk);
                $display("------------------------------------------------------------------------------");
                $display("%3d: FETCH:            Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch);
                $display("%3d: ISSUE:  Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue);
                $display("------------------------------------------------------------------------------");
                $display("%3d: FETCH:            Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch);
                $display("%3d: ISSUE:  Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue);

-               $display("%3d: DECODE:                      op1 %08x, op2 %08x, op3 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry);
-               $display("%3d: EXEC:   Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, bubble_out_execute, insn_out_execute, pc_out_execute, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp, jmppc);
+               $display("%3d: DECODE:                      op0 %08x, op1 %08x, op2 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry);
+               $display("%3d: EXEC:   Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, bubble_out_execute, insn_out_execute, pc_out_execute, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp_out_execute, jmppc_out_execute);

                $display("%3d: MEMORY: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d]", clockno, stall_cause_memory, bubble_out_memory, insn_out_memory, pc_out_memory, memory_out_write_reg, memory_out_write_data, memory_out_write_num);
                $display("%3d: WRITEB:                      CPSR %08x, SPSR %08x, Reg: %d [%08x -> %d], Jmp: %d [%08x]", clockno, writeback_out_cpsr, writeback_out_spsr, regfile_write, regfile_write_data, regfile_write_reg, jmp_out_writeback, jmppc_out_writeback);
        end
                $display("%3d: MEMORY: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d]", clockno, stall_cause_memory, bubble_out_memory, insn_out_memory, pc_out_memory, memory_out_write_reg, memory_out_write_data, memory_out_write_num);
                $display("%3d: WRITEB:                      CPSR %08x, SPSR %08x, Reg: %d [%08x -> %d], Jmp: %d [%08x]", clockno, writeback_out_cpsr, writeback_out_spsr, regfile_write, regfile_write_data, regfile_write_reg, jmp_out_writeback, jmppc_out_writeback);
        end