input clk,
input Nrst, /* XXX not used yet */
- input stall,
- input flush,
+ input stall_2a,
+ input flush_2a,
- input inbubble,
- input [31:0] pc,
- input [31:0] insn,
- input [31:0] cpsr,
- input [31:0] op0,
- input [31:0] op1,
- input [31:0] op2,
- input carry,
+ input bubble_2a,
+ input [31:0] pc_2a,
+ input [31:0] insn_2a,
+ input [31:0] cpsr_2a,
+ input [31:0] spsr_2a,
+ input [31:0] op0_2a,
+ input [31:0] op1_2a,
+ input [31:0] op2_2a,
+ input carry_2a,
- output reg outstall = 0,
- output reg outbubble = 1
+ output reg outstall_2a = 0,
+ output reg bubble_3a = 1,
+ output reg [31:0] cpsr_3a = 0,
+ output reg [31:0] spsr_3a = 0,
+ output reg cpsrup_3a = 0,
+ output reg write_reg_3a = 1'bx,
+ output reg [3:0] write_num_3a = 4'bxxxx,
+ output reg [31:0] write_data_3a = 32'hxxxxxxxx,
+ output reg [31:0] jmppc_2a,
+ output reg jmp_2a,
+ output reg [31:0] pc_3a,
+ output reg [31:0] insn_3a,
+ output reg [31:0] op0_3a, op1_3a, op2_3a
);
+ reg mult_start;
+ reg [31:0] mult_acc0, mult_in0, mult_in1;
+ wire mult_done;
+ wire [31:0] mult_result;
+
+ reg [31:0] alu_in0_2a, alu_in1_2a;
+ reg [3:0] alu_op_2a;
+ reg alu_setflags_2a;
+ wire [31:0] alu_result_2a, alu_outcpsr_2a;
+ wire alu_setres_2a;
+
+ reg next_bubble_3a;
+ reg [31:0] next_cpsr_3a, next_spsr_3a;
+ reg next_cpsrup_3a;
+
+ reg next_write_reg_3a;
+ reg [3:0] next_write_num_3a;
+ reg [31:0] next_write_data_3a;
+
+ Multiplier multiplier(
+ .clk(clk), .Nrst(Nrst),
+ .start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
+ .in1(mult_in1), .done(mult_done), .result(mult_result));
+
+ ALU alu(
+ .clk(clk), .Nrst(Nrst),
+ .in0(alu_in0_2a), .in1(alu_in1_2a), .cpsr(cpsr_2a), .op(alu_op_2a),
+ .setflags(alu_setflags_2a), .shifter_carry(carry_2a),
+ .result(alu_result_2a), .cpsr_out(alu_outcpsr_2a), .setres(alu_setres_2a));
+
+ always @(posedge clk)
+ begin
+ if (!stall_2a)
+ begin
+ bubble_3a <= next_bubble_3a;
+ cpsr_3a <= next_cpsr_3a;
+ spsr_3a <= next_spsr_3a;
+ cpsrup_3a <= next_cpsrup_3a;
+ write_reg_3a <= next_write_reg_3a;
+ write_num_3a <= next_write_num_3a;
+ write_data_3a <= next_write_data_3a;
+ pc_3a <= pc_2a;
+ insn_3a <= insn_2a;
+ op0_3a <= op0_2a;
+ op1_3a <= op1_2a;
+ op2_3a <= op2_2a;
+ end
+ end
+
+ reg delayedflush_2a = 0;
+ always @(posedge clk)
+ if (flush_2a && outstall_2a /* halp! I can't do it now, maybe later? */)
+ delayedflush_2a <= 1;
+ else if (!outstall_2a /* anything has been handled this time around */)
+ delayedflush_2a <= 0;
+
+ reg outstall_3a = 0;
+ always @(posedge clk)
+ outstall_3a <= outstall_2a;
+
+ always @(*)
+ begin
+ outstall_2a = stall_2a;
+
+ casez (insn_2a)
+ `DECODE_ALU_MULT: /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+ outstall_2a = outstall_2a | ((!outstall_3a | !mult_done) && !bubble_2a);
+ endcase
+ end
+
+ /* ALU inputs */
+ always @(*)
+ begin
+ alu_in0_2a = op0_2a;
+ alu_in1_2a = op1_2a;
+ alu_op_2a = insn_2a[24:21];
+ alu_setflags_2a = insn_2a[20] /* S */;
+ end
+
+ /* Register outputs */
+ always @(*)
+ begin
+ next_cpsr_3a = cpsr_2a;
+ next_spsr_3a = spsr_2a;
+ next_cpsrup_3a = 0;
+ next_write_reg_3a = 0;
+ next_write_num_3a = 4'hx;
+ next_write_data_3a = 32'hxxxxxxxx;
+
+ casez(insn_2a)
+ `DECODE_ALU_MULT: /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+ begin
+ next_cpsr_3a = insn_2a[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr_2a[28] /* V */, cpsr_2a[27:0]} : cpsr_2a;
+ next_cpsrup_3a = insn_2a[20] /* S */;
+ next_write_reg_3a = 1;
+ next_write_num_3a = insn_2a[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
+ next_write_data_3a = mult_result;
+ end
+ `DECODE_ALU_MRS: /* MRS (Transfer PSR to register) */
+ begin
+ next_write_reg_3a = 1;
+ next_write_num_3a = insn_2a[15:12];
+ if (insn_2a[22] /* Ps */)
+ next_write_data_3a = spsr_2a;
+ else
+ next_write_data_3a = cpsr_2a;
+ end
+ `DECODE_ALU_MSR, /* MSR (Transfer register to PSR) */
+ `DECODE_ALU_MSR_FLAGS: /* MSR (Transfer register or immediate to PSR, flag bits only) */
+ begin
+ if ((cpsr_2a[4:0] == `MODE_USR) || (insn_2a[16] /* that random bit */ == 1'b0)) /* flags only */
+ begin
+ if (insn_2a[22] /* Ps */)
+ next_spsr_3a = {op0_2a[31:29], spsr_2a[28:0]};
+ else
+ next_cpsr_3a = {op0_2a[31:29], cpsr_2a[28:0]};
+ end else begin
+ if (insn_2a[22] /* Ps */)
+ next_spsr_3a = op0_2a;
+ else
+ next_cpsr_3a = op0_2a;
+ end
+ next_cpsrup_3a = 1;
+ end
+ `DECODE_ALU_SWP, /* Atomic swap */
+ `DECODE_ALU_BX, /* Branch */
+ `DECODE_ALU_HDATA_REG, /* Halfword transfer - register offset */
+ `DECODE_ALU_HDATA_IMM: /* Halfword transfer - immediate offset */
+ begin end
+ `DECODE_ALU: /* ALU */
+ begin
+ if (alu_setres_2a) begin
+ next_write_reg_3a = 1;
+ next_write_num_3a = insn_2a[15:12] /* Rd */;
+ next_write_data_3a = alu_result_2a;
+ end
+
+ if (insn_2a[20] /* S */) begin
+ next_cpsrup_3a = 1;
+ next_cpsr_3a = ((insn_2a[15:12] == 4'b1111) && insn_2a[20]) ? spsr_2a : alu_outcpsr_2a;
+ end
+ end
+ `DECODE_LDRSTR_UNDEFINED, /* Undefined. I hate ARM */
+ `DECODE_LDRSTR, /* Single data transfer */
+ `DECODE_LDMSTM: /* Block data transfer */
+ begin end
+ `DECODE_BRANCH: /* Branch */
+ begin
+ if(insn_2a[24] /* L */) begin
+ next_write_reg_3a = 1;
+ next_write_num_3a = 4'hE; /* link register */
+ next_write_data_3a = pc_2a + 32'h4;
+ end
+ end
+ endcase
+ end
+
+ /* Multiplier inputs */
+ always @(*)
+ begin
+ mult_start = 0;
+ mult_acc0 = 32'hxxxxxxxx;
+ mult_in0 = 32'hxxxxxxxx;
+ mult_in1 = 32'hxxxxxxxx;
+
+ casez(insn_2a)
+ `DECODE_ALU_MULT:
+ begin
+ if (!outstall_3a /* i.e., this is a new one */ && !bubble_2a /* i.e., this is a real one */)
+ begin
+ mult_start = 1;
+ mult_acc0 = insn_2a[21] /* A */ ? op0_2a /* Rn */ : 32'h0;
+ mult_in0 = op1_2a /* Rm */;
+ mult_in1 = op2_2a /* Rs */;
+ $display("New MUL instruction");
+ end
+ end
+ endcase
+ end
+
+ /* Miscellaneous cleanup. */
+ always @(*)
+ begin
+ next_bubble_3a = bubble_2a | flush_2a | delayedflush_2a;
+
+ jmp_2a = 1'b0;
+ jmppc_2a = 32'h00000000;
+
+ casez (insn_2a)
+ `DECODE_ALU_MULT: /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
+ next_bubble_3a = next_bubble_3a | !mult_done | !outstall_3a;
+ `DECODE_ALU_MRS, /* MRS (Transfer PSR to register) */
+ `DECODE_ALU_MSR, /* MSR (Transfer register to PSR) */
+ `DECODE_ALU_MSR_FLAGS, /* MSR (Transfer register or immediate to PSR, flag bits only) */
+ `DECODE_ALU_SWP, /* Atomic swap */
+ `DECODE_ALU_BX, /* Branch */
+ `DECODE_ALU_HDATA_REG, /* Halfword transfer - register offset */
+ `DECODE_ALU_HDATA_IMM, /* Halfword transfer - immediate offset */
+ `DECODE_ALU, /* ALU */
+ `DECODE_LDRSTR_UNDEFINED, /* Undefined. I hate ARM */
+ `DECODE_LDRSTR, /* Single data transfer */
+ `DECODE_LDMSTM: /* Block data transfer */
+ begin end
+ `DECODE_BRANCH:
+ begin
+ if(!bubble_2a && !flush_2a && !delayedflush_2a && !outstall_2a /* Let someone else take precedence. */) begin
+ jmppc_2a = pc_2a + op0_2a + 32'h8;
+ jmp_2a = 1'b1;
+ end
+ end /* Branch */
+ `DECODE_LDCSTC, /* Coprocessor data transfer */
+ `DECODE_CDP, /* Coprocessor data op */
+ `DECODE_MRCMCR, /* Coprocessor register transfer */
+ `DECODE_SWI: /* SWI */
+ begin end
+ default: /* X everything else out */
+ begin end
+ endcase
+ end
endmodule
module Multiplier(
end
end
endmodule
+
+module ALU(
+ input clk,
+ input Nrst, /* XXX not used yet */
+
+ input [31:0] in0,
+ input [31:0] in1,
+ input [31:0] cpsr,
+ input [3:0] op,
+ input setflags,
+ input shifter_carry,
+
+ output reg [31:0] result,
+ output reg [31:0] cpsr_out,
+ output reg setres
+);
+ reg [31:0] res;
+ reg flag_n, flag_z, flag_c, flag_v;
+ wire [32:0] sum, diff, rdiff;
+ wire sum_v, diff_v, rdiff_v;
+
+ assign sum = {1'b0, in0} + {1'b0, in1};
+ assign diff = {1'b0, in0} - {1'b0, in1};
+ assign rdiff = {1'b0, in1} - {1'b0, in0};
+ assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
+ assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
+ assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);
+
+ always @(*) begin
+ res = 32'hxxxxxxxx;
+ setres = 1'bx;
+ flag_c = cpsr[`CPSR_C];
+ flag_v = cpsr[`CPSR_V];
+ case(op)
+ `ALU_AND: begin
+ result = in0 & in1;
+ flag_c = shifter_carry;
+ setres = 1'b1;
+ end
+ `ALU_EOR: begin
+ result = in0 ^ in1;
+ flag_c = shifter_carry;
+ setres = 1'b1;
+ end
+ `ALU_SUB: begin
+ {flag_c, result} = diff;
+ flag_c = !flag_c;
+ flag_v = diff_v;
+ setres = 1'b1;
+ end
+ `ALU_RSB: begin
+ {flag_c, result} = rdiff;
+ flag_c = !flag_c;
+ flag_v = rdiff_v;
+ setres = 1'b1;
+ end
+ `ALU_ADD: begin
+ {flag_c, result} = sum;
+ flag_v = sum_v;
+ setres = 1'b1;
+ end
+ `ALU_ADC: begin
+ {flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
+ flag_v = sum_v | (~sum[31] & result[31]);
+ setres = 1'b1;
+ end
+ `ALU_SBC: begin
+ {flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
+ flag_c = !flag_c;
+ flag_v = diff_v | (diff[31] & ~result[31]);
+ setres = 1'b1;
+ end
+ `ALU_RSC: begin
+ {flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
+ flag_c = !flag_c;
+ flag_v = rdiff_v | (rdiff[31] & ~result[31]);
+ setres = 1'b1;
+ end
+ `ALU_TST: begin
+ result = in0 & in1;
+ flag_c = shifter_carry;
+ setres = 1'b0;
+ end
+ `ALU_TEQ: begin
+ result = in0 ^ in1;
+ flag_c = shifter_carry;
+ setres = 1'b0;
+ end
+ `ALU_CMP: begin
+ {flag_c, result} = diff;
+ flag_c = !flag_c;
+ flag_v = diff_v;
+ setres = 1'b0;
+ end
+ `ALU_CMN: begin
+ {flag_c, result} = sum;
+ flag_v = sum_v;
+ setres = 1'b0;
+ end
+ `ALU_ORR: begin
+ result = in0 | in1;
+ flag_c = shifter_carry;
+ setres = 1'b1;
+ end
+ `ALU_MOV: begin
+ result = in1;
+ flag_c = shifter_carry;
+ setres = 1'b1;
+ end
+ `ALU_BIC: begin
+ result = in0 & (~in1);
+ flag_c = shifter_carry;
+ setres = 1'b1;
+ end
+ `ALU_MVN: begin
+ result = ~in1;
+ flag_c = shifter_carry;
+ setres = 1'b1;
+ end
+ endcase
+
+ flag_z = (result == 0);
+ flag_n = result[31];
+
+ cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
+ end
+endmodule
git.joshuawise.com / firearm.git / blobdiff