*/
wire decode = (bus_addr & ~32'h00003FFF) == 32'h00000000;
/* verilator lint_off WIDTH */
- wire [13:2] ramaddr = bus_addr & 32'h3FFC; /* mask off lower two bits
+ wire [13:0] ramaddr = bus_addr & 32'h3FFC; /* mask off lower two bits
* for word alignment */
/* verilator lint_on WIDTH */
reg [31:0] data [(16384 / 4 - 1):0];
reg [31:0] temprdata = 0;
- reg [13:2] lastread = 0;
+ reg [13:0] lastread = 14'h3FFF;
assign bus_rdata = (bus_rd && decode) ? temprdata : 32'h0;
assign bus_ready = decode &&
always @(posedge clk)
begin
if (bus_wr && decode)
- data[ramaddr] <= bus_wdata;
+ data[ramaddr[13:2]] <= bus_wdata;
/* This is not allowed to be conditional -- stupid Xilinx
* blockram. */
- temprdata <= data[ramaddr];
+ temprdata <= data[ramaddr[13:2]];
lastread <= ramaddr;
end
endmodule