]> Joshua Wise's Git repositories - firearm.git/blobdiff - Execute.v
Fetch: Allow new queued jumps to take precedence over old queued jumps (i.e., ldm...
[firearm.git] / Execute.v
index 3a21968a02d002aa3977de264acdda951807b4c9..7dcc4b991d7da72df4adf9b34bfcc1a7ee61af43 100644 (file)
--- a/Execute.v
+++ b/Execute.v
@@ -9,6 +9,7 @@ module Execute(
        input [31:0] pc,
        input [31:0] insn,
        input [31:0] cpsr,
+       input [31:0] spsr,
        input [31:0] op0,
        input [31:0] op1,
        input [31:0] op2,
@@ -17,9 +18,16 @@ module Execute(
        output reg outstall = 0,
        output reg outbubble = 1,
        output reg [31:0] outcpsr = 0,
+       output reg [31:0] outspsr = 0,
+       output reg outcpsrup = 0,
        output reg write_reg = 1'bx,
        output reg [3:0] write_num = 4'bxxxx,
-       output reg [31:0] write_data = 32'hxxxxxxxx
+       output reg [31:0] write_data = 32'hxxxxxxxx,
+       output reg [31:0] jmppc,
+       output reg jmp,
+       output reg [31:0] outpc,
+       output reg [31:0] outinsn,
+       output reg [31:0] outop0, outop1, outop2
        );
        
        reg mult_start;
@@ -34,11 +42,13 @@ module Execute(
        wire alu_setres;
        
        reg next_outbubble;
-       reg [31:0] next_outcpsr;
+       reg [31:0] next_outcpsr, next_outspsr;
+       reg next_outcpsrup;
        reg next_write_reg;
        reg [3:0] next_write_num;
+
        reg [31:0] next_write_data;
-       
+
        Multiplier multiplier(
                .clk(clk), .Nrst(Nrst),
                .start(mult_start), .acc0(mult_acc0), .in0(mult_in0),
@@ -49,18 +59,32 @@ module Execute(
                .in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op),
                .setflags(alu_setflags), .shifter_carry(carry),
                .result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres));
-       
+
        always @(posedge clk)
        begin
                if (!stall)
                begin
                        outbubble <= next_outbubble;
                        outcpsr <= next_outcpsr;
+                       outspsr <= next_outspsr;
+                       outcpsrup <= next_outcpsrup;
                        write_reg <= next_write_reg;
                        write_num <= next_write_num;
                        write_data <= next_write_data;
+                       outpc <= pc;
+                       outinsn <= insn;
+                       outop0 <= op0;
+                       outop1 <= op1;
+                       outop2 <= op2;
                end
        end
+       
+       reg delayedflush = 0;
+       always @(posedge clk)
+               if (flush && outstall /* halp! I can't do it now, maybe later? */)
+                       delayedflush <= 1;
+               else if (!outstall /* anything has been handled this time around */)
+                       delayedflush <= 0;
 
        reg prevstall = 0;
        always @(posedge clk)
@@ -69,22 +93,27 @@ module Execute(
        always @(*)
        begin
                outstall = stall;
-               next_outbubble = inbubble;
+               next_outbubble = inbubble | flush | delayedflush;
                next_outcpsr = cpsr;
+               next_outspsr = spsr;
+               next_outcpsrup = 0;
                next_write_reg = 0;
                next_write_num = 4'hx;
                next_write_data = 32'hxxxxxxxx;
-       
+
                mult_start = 0;
                mult_acc0 = 32'hxxxxxxxx;
                mult_in0 = 32'hxxxxxxxx;
                mult_in1 = 32'hxxxxxxxx;
-       
+
                alu_in0 = 32'hxxxxxxxx;
                alu_in1 = 32'hxxxxxxxx;
                alu_op = 4'hx;  /* hax! */
                alu_setflags = 1'bx;
-               
+
+               jmp = 1'b0;
+               jmppc = 32'h00000000;
+
                casez (insn)
                `DECODE_ALU_MULT:       /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
                begin
@@ -96,17 +125,42 @@ module Execute(
                                mult_in1 = op2 /* Rs */;
                                $display("New MUL instruction");
                        end
-                       outstall = stall | ((!prevstall | !mult_done) && !inbubble);
-                       next_outbubble = inbubble | !mult_done | !prevstall;
+                       outstall = outstall | ((!prevstall | !mult_done) && !inbubble);
+                       next_outbubble = next_outbubble | !mult_done | !prevstall;
                        next_outcpsr = insn[20] /* S */ ? {mult_result[31] /* N */, mult_result == 0 /* Z */, 1'b0 /* C */, cpsr[28] /* V */, cpsr[27:0]} : cpsr;
+                       next_outcpsrup = insn[20] /* S */;
                        next_write_reg = 1;
                        next_write_num = insn[19:16] /* Rd -- why the fuck isn't this the same place as ALU */;
                        next_write_data = mult_result;
                end
 //             `DECODE_ALU_MUL_LONG,   /* Multiply long */
-               `DECODE_ALU_MRS,        /* MRS (Transfer PSR to register) */
+               `DECODE_ALU_MRS:        /* MRS (Transfer PSR to register) */
+               begin
+                       next_write_reg = 1;
+                       next_write_num = insn[15:12];
+                       if (insn[22] /* Ps */)
+                               next_write_data = spsr;
+                       else
+                               next_write_data = cpsr;
+                       next_outcpsrup = 1;
+               end
                `DECODE_ALU_MSR,        /* MSR (Transfer register to PSR) */
-               `DECODE_ALU_MSR_FLAGS,  /* MSR (Transfer register or immediate to PSR, flag bits only) */
+               `DECODE_ALU_MSR_FLAGS:  /* MSR (Transfer register or immediate to PSR, flag bits only) */
+               begin
+                       if ((cpsr[4:0] == `MODE_USR) || (insn[16] /* that random bit */ == 1'b0))       /* flags only */
+                       begin
+                               if (insn[22] /* Ps */)
+                                       next_outspsr = {op0[31:29], spsr[28:0]};
+                               else
+                                       next_outcpsr = {op0[31:29], cpsr[28:0]};
+                       end else begin
+                               if (insn[22] /* Ps */)
+                                       next_outspsr = op0;
+                               else
+                                       next_outcpsr = op0;
+                       end
+                       next_outcpsrup = 1;
+               end
                `DECODE_ALU_SWP,        /* Atomic swap */
                `DECODE_ALU_BX,         /* Branch */
                `DECODE_ALU_HDATA_REG,  /* Halfword transfer - register offset */
@@ -117,7 +171,7 @@ module Execute(
                        alu_in0 = op0;
                        alu_in1 = op1;
                        alu_op = insn[24:21];
-                       alu_setflags = insn[20] /* I */;
+                       alu_setflags = insn[20] /* S */;
                        
                        if (alu_setres) begin
                                next_write_reg = 1;
@@ -125,12 +179,25 @@ module Execute(
                                next_write_data = alu_result;
                        end
                        
-                       next_outcpsr = alu_outcpsr;
+                       next_outcpsr = ((insn[15:12] == 4'b1111) && insn[20]) ? spsr : alu_outcpsr;
+                       next_outcpsrup = insn[20] /* S */;
                end
                `DECODE_LDRSTR_UNDEFINED,       /* Undefined. I hate ARM */
                `DECODE_LDRSTR,         /* Single data transfer */
-               `DECODE_LDMSTM,         /* Block data transfer */
-               `DECODE_BRANCH,         /* Branch */
+               `DECODE_LDMSTM:         /* Block data transfer */
+               begin end
+               `DECODE_BRANCH:
+               begin
+                       if(!inbubble && !flush && !delayedflush) begin
+                               jmppc = pc + op0 + 32'h8;
+                               if(insn[24]) begin
+                                       next_write_reg = 1;
+                                       next_write_num = 4'hE; /* link register */
+                                       next_write_data = pc + 32'h4;
+                               end
+                               jmp = 1'b1;
+                       end
+               end                     /* Branch */
                `DECODE_LDCSTC,         /* Coprocessor data transfer */
                `DECODE_CDP,            /* Coprocessor data op */
                `DECODE_MRCMCR,         /* Coprocessor register transfer */
@@ -194,14 +261,14 @@ module ALU(
        output reg [31:0] cpsr_out,
        output reg setres
 );
-       wire [31:0] res;
-       wire flag_n, flag_z, flag_c, flag_v, setres;
+       reg [31:0] res;
+       reg flag_n, flag_z, flag_c, flag_v;
        wire [32:0] sum, diff, rdiff;
        wire sum_v, diff_v, rdiff_v;
 
        assign sum = {1'b0, in0} + {1'b0, in1};
        assign diff = {1'b0, in0} - {1'b0, in1};
-       assign rdiff = {1'b0, in1} + {1'b0, in0};
+       assign rdiff = {1'b0, in1} - {1'b0, in0};
        assign sum_v = (in0[31] ^~ in1[31]) & (sum[31] ^ in0[31]);
        assign diff_v = (in0[31] ^ in1[31]) & (diff[31] ^ in0[31]);
        assign rdiff_v = (in0[31] ^ in1[31]) & (rdiff[31] ^ in1[31]);
This page took 0.030395 seconds and 4 git commands to generate.