Wire up decode.

[firearm.git] / system.v

diff --git a/system.v b/system.v
index 0c25de3a9e3f28b6fb13212fb16fc762cf5ba39e..251b43c348dd3d84e8ff14553e0ea2266014f563 100644 (file)
--- a/system.v
+++ b/system.v
@@ -32,6 +32,26 @@ module System(input clk, output wire bubbleshield, output wire [31:0] insn, outp
        wire icache_rd_req;
        wire icache_rd_wait;
        wire [31:0] icache_rd_data;
+       
+       wire stall_cause_issue;
+       
+       wire stall_in_fetch = stall_cause_issue;
+       wire stall_in_issue = 0;
+       
+       wire [31:0] decode_out_op0, decode_out_op1, decode_out_op2, decode_out_cpsr;
+       wire [3:0] regfile_read_0, regfile_read_1, regfile_read_2;
+       wire [31:0] regfile_rdata_0, regfile_rdata_1, regfile_rdata_2;
+       
+       wire bubble_out_fetch;
+       wire bubble_out_issue;
+       wire [31:0] insn_out_fetch;
+       wire [31:0] insn_out_issue;
+       wire [31:0] pc_out_fetch;
+       wire [31:0] pc_out_issue;
+       
+       assign bubbleshield = bubble_out_issue;
+       assign insn = insn_out_issue;
+       assign pc = pc_out_issue;
 
        BusArbiter busarbiter(.bus_req(bus_req), .bus_ack(bus_ack));
 
@@ -56,7 +76,40 @@ module System(input clk, output wire bubbleshield, output wire [31:0] insn, outp
                .Nrst(1 /* XXX */),
                .rd_addr(icache_rd_addr), .rd_req(icache_rd_req),
                .rd_wait(icache_rd_wait), .rd_data(icache_rd_data),
-               .stall(0 /* XXX */), .jmp(0 /* XXX */), .jmppc(0 /* XXX */),
-               .bubble(bubbleshield), .insn(insn), .pc(pc));
-
+               .stall(stall_in_fetch), .jmp(0 /* XXX */), .jmppc(0 /* XXX */),
+               .bubble(bubble_out_fetch), .insn(insn_out_fetch),
+               .pc(pc_out_fetch));
+       
+       Issue issue(
+               .clk(clk),
+               .Nrst(1 /* XXX */),
+               .stall(stall_in_issue), .flush(0 /* XXX */),
+               .inbubble(bubble_out_fetch), .insn(insn_out_fetch),
+               .inpc(pc_out_fetch), .cpsr(0 /* XXX */),
+               .outstall(stall_cause_issue), .outbubble(bubble_out_issue),
+               .outpc(pc_out_issue), .outinsn(insn_out_issue));
+       
+       RegFile regfile(
+               .clk(clk),
+               .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2),
+               .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2),
+               .write(0), .write_req(0), .write_data(0 /* XXX */));
+       
+       Decode decode(
+               .clk(clk),
+               .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(0 /* XXX */),
+               .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2),
+               .outcpsr(decode_out_cpsr),
+               .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), 
+               .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2));
+       
+       reg [31:0] clockno = 0;
+       always @(posedge clk)
+       begin
+               clockno <= clockno + 1;
+               $display("------------------------------------------------------------------------------");
+               $display("%3d: FETCH:            Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch);
+               $display("%3d: ISSUE:  Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue);
+               $display("%3d: DECODE:                      op1 %08x, op2 %08x, op3 %08x, cpsr %08x", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_cpsr);
+       end
 endmodule