Execute.v: Wire up the ALU.

[firearm.git] / Execute.v

diff --git a/Execute.v b/Execute.v
index 6be1af5c17fb63c10d351ada86270371cdbd8181..ac759bb8b69642a8938665d6c97a35c21fff50ab 100644 (file)
--- a/Execute.v
+++ b/Execute.v
@@ -31,7 +31,13 @@ module Execute(
        reg [3:0] alu_op;
        reg alu_setflags;
        wire [31:0] alu_result, alu_outcpsr;
-       wire alu_set;
+       wire alu_setres;
+       
+       reg next_outbubble;
+       reg [31:0] next_outcpsr;
+       reg next_write_reg;
+       reg [3:0] next_write_num;
+       reg [31:0] next_write_data;
        
        Multiplier multiplier(
                .clk(clk), .Nrst(Nrst),
@@ -42,9 +48,34 @@ module Execute(
                .clk(clk), .Nrst(Nrst),
                .in0(alu_in0), .in1(alu_in1), .cpsr(cpsr), .op(alu_op),
                .setflags(alu_setflags), .shifter_carry(carry),
-               .result(alu_result), .cpsr_out(alu_outcpsr), .set(alu_set));
+               .result(alu_result), .cpsr_out(alu_outcpsr), .setres(alu_setres));
+       
+       always @(posedge clk)
+       begin
+               if (!stall)
+               begin
+                       outbubble <= next_outbubble;
+                       outcpsr <= next_outcpsr;
+                       write_reg <= next_write_reg;
+                       write_num <= next_write_num;
+                       write_data <= next_write_data;
+               end
+       end
 
        always @(*)
+       begin
+               outstall = stall;
+               next_outbubble = inbubble;
+               next_outcpsr = cpsr;
+               next_write_reg = 0;
+               next_write_num = 4'hx;
+               next_write_data = 32'hxxxxxxxx;
+       
+               alu_in0 = 32'hxxxxxxxx;
+               alu_in1 = 32'hxxxxxxxx;
+               alu_op = 4'hx;  /* hax! */
+               alu_setflags = 1'bx;
+               
                casez (insn)
                `DECODE_ALU_MULT,       /* Multiply -- must come before ALU, because it pattern matches a specific case of ALU */
 //             `DECODE_ALU_MUL_LONG,   /* Multiply long */
@@ -54,8 +85,23 @@ module Execute(
                `DECODE_ALU_SWP,        /* Atomic swap */
                `DECODE_ALU_BX,         /* Branch */
                `DECODE_ALU_HDATA_REG,  /* Halfword transfer - register offset */
-               `DECODE_ALU_HDATA_IMM,  /* Halfword transfer - immediate offset */
-               `DECODE_ALU,            /* ALU */
+               `DECODE_ALU_HDATA_IMM:  /* Halfword transfer - immediate offset */
+               begin end
+               `DECODE_ALU:            /* ALU */
+               begin
+                       alu_in0 = op0;
+                       alu_in1 = op1;
+                       alu_op = insn[24:21];
+                       alu_setflags = insn[20] /* I */;
+                       
+                       if (alu_setres) begin
+                               next_write_reg = 1;
+                               next_write_num = insn[15:12] /* Rd */;
+                               next_write_data = alu_result;
+                       end
+                       
+                       next_outcpsr = alu_outcpsr;
+               end
                `DECODE_LDRSTR_UNDEFINED,       /* Undefined. I hate ARM */
                `DECODE_LDRSTR,         /* Single data transfer */
                `DECODE_LDMSTM,         /* Block data transfer */
@@ -68,6 +114,7 @@ module Execute(
                default:                /* X everything else out */
                begin end
                endcase
+       end
 endmodule
 
 module Multiplier(
@@ -121,7 +168,7 @@ module ALU(
 
        output reg [31:0] result,
        output reg [31:0] cpsr_out,
-       output reg set
+       output reg setres
 );
        wire [31:0] res;
        wire flag_n, flag_z, flag_c, flag_v, setres;
@@ -139,89 +186,82 @@ module ALU(
                flag_v = cpsr[`CPSR_V];
                case(op)
                `ALU_AND: begin
-                       res = in0 & in1;
+                       result = in0 & in1;
                        flag_c = shifter_carry;
                        setres = 1'b1;
                end
                `ALU_EOR: begin
-                       res = in0 ^ in1;
+                       result = in0 ^ in1;
                        flag_c = shifter_carry;
                        setres = 1'b1;
                end
                `ALU_SUB: begin
-                       {flag_c, res} = diff;
+                       {flag_c, result} = diff;
                        setres = 1'b1;
                end
                `ALU_RSB: begin
-                       {flag_c, res} = rdiff;
+                       {flag_c, result} = rdiff;
                        setres = 1'b1;
                end
                `ALU_ADD: begin
-                       {flag_c, res} = sum;
+                       {flag_c, result} = sum;
                        setres = 1'b1;
                end
                `ALU_ADC: begin
-                       {flag_c, res} = sum + {32'b0, cpsr[`CPSR_C]};
+                       {flag_c, result} = sum + {32'b0, cpsr[`CPSR_C]};
                        setres = 1'b1;
                end
                `ALU_SBC: begin
-                       {flag_c, res} = diff - {32'b0, (~cpsr[`CPSR_C])};
+                       {flag_c, result} = diff - {32'b0, (~cpsr[`CPSR_C])};
                        setres = 1'b1;
                end
                `ALU_RSC: begin
-                       {flag_c, res} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
+                       {flag_c, result} = rdiff - {32'b0, (~cpsr[`CPSR_C])};
                        setres = 1'b1;
                end
                `ALU_TST: begin
-                       res = in0 & in1;
+                       result = in0 & in1;
                        flag_c = shifter_carry;
                        setres = 1'b0;
                end
                `ALU_TEQ: begin
-                       res = in0 ^ in1;
+                       result = in0 ^ in1;
                        flag_c = shifter_carry;
                        setres = 1'b0;
                end
                `ALU_CMP: begin
-                       {flag_c, res} = diff;
+                       {flag_c, result} = diff;
                        setres = 1'b0;
                end
                `ALU_CMN: begin
-                       {flag_c, res} = sum;
+                       {flag_c, result} = sum;
                        setres = 1'b0;
                end
                `ALU_ORR: begin
-                       res = in0 | in1;
+                       result = in0 | in1;
                        flag_c = shifter_carry;
                        setres = 1'b1;
                end
                `ALU_MOV: begin
-                       res = in1;
+                       result = in1;
                        flag_c = shifter_carry;
                        setres = 1'b1;
                end
                `ALU_BIC: begin
-                       res = in0 & (~in1);
+                       result = in0 & (~in1);
                        flag_c = shifter_carry;
                        setres = 1'b1;
                end
                `ALU_MVN: begin
-                       res = ~in1;
+                       result = ~in1;
                        flag_c = shifter_carry;
                        setres = 1'b1;
                end
                endcase
+               
+               flag_z = (result == 0);
+               flag_n = result[31];
+               
+               cpsr_out = setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
        end
-
-       always @(*) begin
-               flag_z = (res == 0);
-               flag_n = res[31];
-       end
-
-       always @(posedge clk) begin
-               result <= res;
-               cpsr_out <= setflags ? {flag_n, flag_z, flag_c, flag_v, cpsr[27:0]} : cpsr;
-               set <= setres;
-       end
-
 endmodule