]>
Commit | Line | Data |
---|---|---|
1 | `define BUS_ICACHE 0 | |
2 | `define BUS_DCACHE 1 | |
3 | ||
4 | module System(input clk); | |
5 | wire [7:0] bus_req; | |
6 | wire [7:0] bus_ack; | |
7 | wire [31:0] bus_addr; | |
8 | wire [31:0] bus_rdata; | |
9 | wire [31:0] bus_wdata; | |
10 | wire bus_rd, bus_wr; | |
11 | wire bus_ready; | |
12 | ||
13 | wire bus_req_icache; | |
14 | wire bus_req_dcache; | |
15 | assign bus_req = {6'b0, bus_req_dcache, bus_req_icache}; | |
16 | wire bus_ack_icache = bus_ack[`BUS_ICACHE]; | |
17 | wire bus_ack_dcache = bus_ack[`BUS_DCACHE]; | |
18 | ||
19 | wire [31:0] bus_addr_icache; | |
20 | wire [31:0] bus_wdata_icache; | |
21 | wire bus_rd_icache; | |
22 | wire bus_wr_icache; | |
23 | ||
24 | wire [31:0] bus_addr_dcache; | |
25 | wire [31:0] bus_wdata_dcache; | |
26 | wire bus_rd_dcache; | |
27 | wire bus_wr_dcache; | |
28 | ||
29 | wire [31:0] bus_rdata_blockram; | |
30 | wire bus_ready_blockram; | |
31 | ||
32 | assign bus_addr = bus_addr_icache | bus_addr_dcache; | |
33 | assign bus_rdata = bus_rdata_blockram; | |
34 | assign bus_wdata = bus_wdata_icache | bus_wdata_dcache; | |
35 | assign bus_rd = bus_rd_icache | bus_rd_dcache; | |
36 | assign bus_wr = bus_wr_icache | bus_wr_dcache; | |
37 | assign bus_ready = bus_ready_blockram; | |
38 | ||
39 | wire [31:0] icache_rd_addr; | |
40 | wire icache_rd_req; | |
41 | wire icache_rd_wait; | |
42 | wire [31:0] icache_rd_data; | |
43 | ||
44 | wire [31:0] dcache_addr; | |
45 | wire dcache_rd_req, dcache_wr_req; | |
46 | wire dcache_rw_wait; | |
47 | wire [31:0] dcache_wr_data, dcache_rd_data; | |
48 | ||
49 | wire [31:0] decode_out_op0, decode_out_op1, decode_out_op2, decode_out_spsr, decode_out_cpsr; | |
50 | wire decode_out_carry; | |
51 | ||
52 | wire [3:0] regfile_read_0, regfile_read_1, regfile_read_2, regfile_read_3; | |
53 | wire [31:0] regfile_rdata_0, regfile_rdata_1, regfile_rdata_2, regfile_rdata_3, regfile_spsr; | |
54 | wire regfile_write; | |
55 | wire [3:0] regfile_write_reg; | |
56 | wire [31:0] regfile_write_data; | |
57 | ||
58 | wire execute_out_write_reg; | |
59 | wire [3:0] execute_out_write_num; | |
60 | wire [31:0] execute_out_write_data; | |
61 | wire [31:0] execute_out_op0, execute_out_op1, execute_out_op2; | |
62 | wire [31:0] execute_out_cpsr, execute_out_spsr; | |
63 | ||
64 | wire jmp_out_execute, jmp_out_writeback; | |
65 | wire [31:0] jmppc_out_execute, jmppc_out_writeback; | |
66 | wire jmp = jmp_out_execute | jmp_out_writeback; | |
67 | wire [31:0] jmppc = jmppc_out_execute | jmppc_out_writeback; | |
68 | ||
69 | wire memory_out_write_reg; | |
70 | wire [3:0] memory_out_write_num; | |
71 | wire [31:0] memory_out_write_data; | |
72 | wire [31:0] memory_out_cpsr, memory_out_spsr; | |
73 | ||
74 | wire [31:0] writeback_out_cpsr, writeback_out_spsr; | |
75 | ||
76 | wire cp_ack_terminal; | |
77 | wire cp_busy_terminal; | |
78 | wire [31:0] cp_read_terminal; | |
79 | ||
80 | wire cp_req; | |
81 | wire [31:0] cp_insn; | |
82 | wire cp_ack = cp_ack_terminal; | |
83 | wire cp_busy = cp_busy_terminal; | |
84 | wire cp_rnw; | |
85 | wire [31:0] cp_read = cp_read_terminal; | |
86 | wire [31:0] cp_write; | |
87 | ||
88 | wire stall_cause_issue; | |
89 | wire stall_cause_execute; | |
90 | wire stall_cause_memory; | |
91 | wire bubble_out_fetch; | |
92 | wire bubble_out_issue; | |
93 | wire bubble_out_execute; | |
94 | wire bubble_out_memory; | |
95 | wire [31:0] insn_out_fetch; | |
96 | wire [31:0] insn_out_issue; | |
97 | wire [31:0] insn_out_execute; | |
98 | wire [31:0] insn_out_memory; | |
99 | wire [31:0] pc_out_fetch; | |
100 | wire [31:0] pc_out_issue; | |
101 | wire [31:0] pc_out_execute; | |
102 | wire [31:0] pc_out_memory; | |
103 | ||
104 | wire execute_out_backflush; | |
105 | wire writeback_out_backflush; | |
106 | ||
107 | BusArbiter busarbiter(.bus_req(bus_req), .bus_ack(bus_ack)); | |
108 | ||
109 | ICache icache( | |
110 | .clk(clk), | |
111 | /* XXX reset? */ | |
112 | .rd_addr(icache_rd_addr), .rd_req(icache_rd_req), | |
113 | .rd_wait(icache_rd_wait), .rd_data(icache_rd_data), | |
114 | .bus_req(bus_req_icache), .bus_ack(bus_ack_icache), | |
115 | .bus_addr(bus_addr_icache), .bus_rdata(bus_rdata), | |
116 | .bus_wdata(bus_wdata_icache), .bus_rd(bus_rd_icache), | |
117 | .bus_wr(bus_wr_icache), .bus_ready(bus_ready)); | |
118 | ||
119 | DCache dcache( | |
120 | .clk(clk), | |
121 | .addr(dcache_addr), .rd_req(dcache_rd_req), .wr_req(dcache_wr_req), | |
122 | .rw_wait(dcache_rw_wait), .wr_data(dcache_wr_data), .rd_data(dcache_rd_data), | |
123 | .bus_req(bus_req_dcache), .bus_ack(bus_ack_dcache), | |
124 | .bus_addr(bus_addr_dcache), .bus_rdata(bus_rdata), | |
125 | .bus_wdata(bus_wdata_dcache), .bus_rd(bus_rd_dcache), | |
126 | .bus_wr(bus_wr_dcache), .bus_ready(bus_ready)); | |
127 | ||
128 | BlockRAM blockram( | |
129 | .clk(clk), | |
130 | .bus_addr(bus_addr), .bus_rdata(bus_rdata_blockram), | |
131 | .bus_wdata(bus_wdata), .bus_rd(bus_rd), .bus_wr(bus_wr), | |
132 | .bus_ready(bus_ready_blockram)); | |
133 | ||
134 | Fetch fetch( | |
135 | .clk(clk), | |
136 | .Nrst(1'b1 /* XXX */), | |
137 | .rd_addr(icache_rd_addr), .rd_req(icache_rd_req), | |
138 | .rd_wait(icache_rd_wait), .rd_data(icache_rd_data), | |
139 | .stall(stall_cause_issue), .jmp(jmp), .jmppc(jmppc), | |
140 | .bubble(bubble_out_fetch), .insn(insn_out_fetch), | |
141 | .pc(pc_out_fetch)); | |
142 | ||
143 | Issue issue( | |
144 | .clk(clk), | |
145 | .Nrst(1'b1 /* XXX */), | |
146 | .stall(stall_cause_execute), .flush(execute_out_backflush | writeback_out_backflush), | |
147 | .inbubble(bubble_out_fetch), .insn(insn_out_fetch), | |
148 | .inpc(pc_out_fetch), .cpsr(writeback_out_cpsr), | |
149 | .outstall(stall_cause_issue), .outbubble(bubble_out_issue), | |
150 | .outpc(pc_out_issue), .outinsn(insn_out_issue)); | |
151 | ||
152 | RegFile regfile( | |
153 | .clk(clk), | |
154 | .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), .read_2(regfile_read_3), | |
155 | .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2), .rdata_2(regfile_rdata_3), | |
156 | .spsr(regfile_spsr), | |
157 | .write(regfile_write), .write_reg(regfile_write_reg), .write_data(regfile_write_data)); | |
158 | ||
159 | Decode decode( | |
160 | .clk(clk), | |
161 | .insn(insn_out_fetch), .inpc(pc_out_fetch), .incpsr(writeback_out_cpsr), .inspsr(writeback_out_spsr), | |
162 | .op0(decode_out_op0), .op1(decode_out_op1), .op2(decode_out_op2), | |
163 | .carry(decode_out_carry), .outcpsr(decode_out_cpsr), .outspsr(decode_out_spsr), | |
164 | .read_0(regfile_read_0), .read_1(regfile_read_1), .read_2(regfile_read_2), | |
165 | .rdata_0(regfile_rdata_0), .rdata_1(regfile_rdata_1), .rdata_2(regfile_rdata_2)); | |
166 | ||
167 | Execute execute( | |
168 | .clk(clk), .Nrst(1'b0), | |
169 | .stall(stall_cause_memory), .flush(writeback_out_backflush), | |
170 | .inbubble(bubble_out_issue), .pc(pc_out_issue), .insn(insn_out_issue), | |
171 | .cpsr(decode_out_cpsr), .spsr(decode_out_spsr), .op0(decode_out_op0), .op1(decode_out_op1), | |
172 | .op2(decode_out_op2), .carry(decode_out_carry), | |
173 | .outstall(stall_cause_execute), .outbubble(bubble_out_execute), | |
174 | .write_reg(execute_out_write_reg), .write_num(execute_out_write_num), | |
175 | .write_data(execute_out_write_data), | |
176 | .jmp(jmp_out_execute), .jmppc(jmppc_out_execute), | |
177 | .outpc(pc_out_execute), .outinsn(insn_out_execute), | |
178 | .outop0(execute_out_op0), .outop1(execute_out_op1), .outop2(execute_out_op2), | |
179 | .outcpsr(execute_out_cpsr), .outspsr(execute_out_spsr)); | |
180 | assign execute_out_backflush = jmp; | |
181 | ||
182 | assign cp_insn = insn_out_execute; | |
183 | Memory memory( | |
184 | .clk(clk), .Nrst(1'b0), | |
185 | /* stall? */ .flush(writeback_out_backflush), | |
186 | .busaddr(dcache_addr), .rd_req(dcache_rd_req), .wr_req(dcache_wr_req), | |
187 | .rw_wait(dcache_rw_wait), .wr_data(dcache_wr_data), .rd_data(dcache_rd_data), | |
188 | .st_read(regfile_read_3), .st_data(regfile_rdata_3), | |
189 | .inbubble(bubble_out_execute), .pc(pc_out_execute), .insn(insn_out_execute), | |
190 | .op0(execute_out_op0), .op1(execute_out_op1), .op2(execute_out_op2), | |
191 | .spsr(execute_out_spsr), .cpsr(execute_out_cpsr), | |
192 | .write_reg(execute_out_write_reg), .write_num(execute_out_write_num), .write_data(execute_out_write_data), | |
193 | .outstall(stall_cause_memory), .outbubble(bubble_out_memory), | |
194 | .outpc(pc_out_memory), .outinsn(insn_out_memory), | |
195 | .out_write_reg(memory_out_write_reg), .out_write_num(memory_out_write_num), | |
196 | .out_write_data(memory_out_write_data), | |
197 | .cp_req(cp_req), .cp_ack(cp_ack), .cp_busy(cp_busy), .cp_rnw(cp_rnw), .cp_read(cp_read), .cp_write(cp_write), | |
198 | .outcpsr(memory_out_cpsr), .outspsr(memory_out_spsr)); | |
199 | ||
200 | Terminal terminal( | |
201 | .clk(clk), | |
202 | .cp_req(cp_req), .cp_insn(cp_insn), .cp_ack(cp_ack_terminal), .cp_busy(cp_busy_terminal), .cp_rnw(cp_rnw), | |
203 | .cp_read(cp_read_terminal), .cp_write(cp_write)); | |
204 | ||
205 | Writeback writeback( | |
206 | .clk(clk), | |
207 | .inbubble(bubble_out_memory), | |
208 | .write_reg(memory_out_write_reg), .write_num(memory_out_write_num), .write_data(memory_out_write_data), | |
209 | .cpsr(memory_out_cpsr), .spsr(memory_out_spsr), | |
210 | .regfile_write(regfile_write), .regfile_write_reg(regfile_write_reg), .regfile_write_data(regfile_write_data), | |
211 | .outcpsr(writeback_out_cpsr), .outspsr(writeback_out_spsr), | |
212 | .jmp(jmp_out_writeback), .jmppc(jmppc_out_writeback)); | |
213 | assign writeback_out_backflush = jmp_out_writeback; | |
214 | ||
215 | reg [31:0] clockno = 0; | |
216 | always @(posedge clk) | |
217 | begin | |
218 | clockno <= clockno + 1; | |
219 | $display("------------------------------------------------------------------------------"); | |
220 | $display("%3d: FETCH: Bubble: %d, Instruction: %08x, PC: %08x", clockno, bubble_out_fetch, insn_out_fetch, pc_out_fetch); | |
221 | $display("%3d: ISSUE: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x", clockno, stall_cause_issue, bubble_out_issue, insn_out_issue, pc_out_issue); | |
222 | $display("%3d: DECODE: op1 %08x, op2 %08x, op3 %08x, carry %d", clockno, decode_out_op0, decode_out_op1, decode_out_op2, decode_out_carry); | |
223 | $display("%3d: EXEC: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d], Jmp: %d [%08x]", clockno, stall_cause_execute, bubble_out_execute, insn_out_execute, pc_out_execute, execute_out_write_reg, execute_out_write_data, execute_out_write_num, jmp, jmppc); | |
224 | $display("%3d: MEMORY: Stall: %d, Bubble: %d, Instruction: %08x, PC: %08x, Reg: %d, [%08x -> %d]", clockno, stall_cause_memory, bubble_out_memory, insn_out_memory, pc_out_memory, memory_out_write_reg, memory_out_write_data, memory_out_write_num); | |
225 | $display("%3d: WRITEB: CPSR %08x, SPSR %08x, Reg: %d [%08x -> %d], Jmp: %d [%08x]", clockno, writeback_out_cpsr, writeback_out_spsr, regfile_write, regfile_write_data, regfile_write_reg, jmp_out_writeback, jmppc_out_writeback); | |
226 | end | |
227 | endmodule |