From: Jacob Potter Date: Thu, 2 Oct 2008 23:01:41 +0000 (-0400) Subject: add net X-Git-Url: http://git.joshuawise.com/netwatch.git/commitdiff_plain/748534f490f9da36041ad8e2ecc046c6a8238d81?ds=sidebyside add net --- diff --git a/net/3c90x.c b/net/3c90x.c new file mode 100644 index 0000000..e7b95e9 --- /dev/null +++ b/net/3c90x.c @@ -0,0 +1,1006 @@ +/* + * 3c90x.c -- This file implements the 3c90x driver for etherboot. Written + * by Greg Beeley, Greg.Beeley@LightSys.org. Modified by Steve Smith, + * Steve.Smith@Juno.Com. Alignment bug fix Neil Newell (nn@icenoir.net). + * + * This program Copyright (C) 1999 LightSys Technology Services, Inc. + * Portions Copyright (C) 1999 Steve Smith + * + * This program may be re-distributed in source or binary form, modified, + * sold, or copied for any purpose, provided that the above copyright message + * and this text are included with all source copies or derivative works, and + * provided that the above copyright message and this text are included in the + * documentation of any binary-only distributions. This program is distributed + * WITHOUT ANY WARRANTY, without even the warranty of FITNESS FOR A PARTICULAR + * PURPOSE or MERCHANTABILITY. Please read the associated documentation + * "3c90x.txt" before compiling and using this driver. + * + * -------- + * + * Program written with the assistance of the 3com documentation for + * the 3c905B-TX card, as well as with some assistance from the 3c59x + * driver Donald Becker wrote for the Linux kernel, and with some assistance + * from the remainder of the Etherboot distribution. + * + * REVISION HISTORY: + * + * v0.10 1-26-1998 GRB Initial implementation. + * v0.90 1-27-1998 GRB System works. + * v1.00pre1 2-11-1998 GRB Got prom boot issue fixed. + * v2.0 9-24-1999 SCS Modified for 3c905 (from 3c905b code) + * Re-wrote poll and transmit for + * better error recovery and heavy + * network traffic operation + * v2.01 5-26-2003 NN Fixed driver alignment issue which + * caused system lockups if driver structures + * not 8-byte aligned. + * + */ + +#include "etherboot-compat.h" +#include +#include +#include +#include +#include + +#define XCVR_MAGIC (0x5A00) +/** any single transmission fails after 16 collisions or other errors + ** this is the number of times to retry the transmission -- this should + ** be plenty + **/ +#define XMIT_RETRIES 250 + +/*** Register definitions for the 3c905 ***/ +enum Registers + { + regPowerMgmtCtrl_w = 0x7c, /** 905B Revision Only **/ + regUpMaxBurst_w = 0x7a, /** 905B Revision Only **/ + regDnMaxBurst_w = 0x78, /** 905B Revision Only **/ + regDebugControl_w = 0x74, /** 905B Revision Only **/ + regDebugData_l = 0x70, /** 905B Revision Only **/ + regRealTimeCnt_l = 0x40, /** Universal **/ + regUpBurstThresh_b = 0x3e, /** 905B Revision Only **/ + regUpPoll_b = 0x3d, /** 905B Revision Only **/ + regUpPriorityThresh_b = 0x3c, /** 905B Revision Only **/ + regUpListPtr_l = 0x38, /** Universal **/ + regCountdown_w = 0x36, /** Universal **/ + regFreeTimer_w = 0x34, /** Universal **/ + regUpPktStatus_l = 0x30, /** Universal with Exception, pg 130 **/ + regTxFreeThresh_b = 0x2f, /** 90X Revision Only **/ + regDnPoll_b = 0x2d, /** 905B Revision Only **/ + regDnPriorityThresh_b = 0x2c, /** 905B Revision Only **/ + regDnBurstThresh_b = 0x2a, /** 905B Revision Only **/ + regDnListPtr_l = 0x24, /** Universal with Exception, pg 107 **/ + regDmaCtrl_l = 0x20, /** Universal with Exception, pg 106 **/ + /** **/ + regIntStatusAuto_w = 0x1e, /** 905B Revision Only **/ + regTxStatus_b = 0x1b, /** Universal with Exception, pg 113 **/ + regTimer_b = 0x1a, /** Universal **/ + regTxPktId_b = 0x18, /** 905B Revision Only **/ + regCommandIntStatus_w = 0x0e, /** Universal (Command Variations) **/ + }; + +/** following are windowed registers **/ +enum Registers7 + { + regPowerMgmtEvent_7_w = 0x0c, /** 905B Revision Only **/ + regVlanEtherType_7_w = 0x04, /** 905B Revision Only **/ + regVlanMask_7_w = 0x00, /** 905B Revision Only **/ + }; + +enum Registers6 + { + regBytesXmittedOk_6_w = 0x0c, /** Universal **/ + regBytesRcvdOk_6_w = 0x0a, /** Universal **/ + regUpperFramesOk_6_b = 0x09, /** Universal **/ + regFramesDeferred_6_b = 0x08, /** Universal **/ + regFramesRecdOk_6_b = 0x07, /** Universal with Exceptions, pg 142 **/ + regFramesXmittedOk_6_b = 0x06, /** Universal **/ + regRxOverruns_6_b = 0x05, /** Universal **/ + regLateCollisions_6_b = 0x04, /** Universal **/ + regSingleCollisions_6_b = 0x03, /** Universal **/ + regMultipleCollisions_6_b = 0x02, /** Universal **/ + regSqeErrors_6_b = 0x01, /** Universal **/ + regCarrierLost_6_b = 0x00, /** Universal **/ + }; + +enum Registers5 + { + regIndicationEnable_5_w = 0x0c, /** Universal **/ + regInterruptEnable_5_w = 0x0a, /** Universal **/ + regTxReclaimThresh_5_b = 0x09, /** 905B Revision Only **/ + regRxFilter_5_b = 0x08, /** Universal **/ + regRxEarlyThresh_5_w = 0x06, /** Universal **/ + regTxStartThresh_5_w = 0x00, /** Universal **/ + }; + +enum Registers4 + { + regUpperBytesOk_4_b = 0x0d, /** Universal **/ + regBadSSD_4_b = 0x0c, /** Universal **/ + regMediaStatus_4_w = 0x0a, /** Universal with Exceptions, pg 201 **/ + regPhysicalMgmt_4_w = 0x08, /** Universal **/ + regNetworkDiagnostic_4_w = 0x06, /** Universal with Exceptions, pg 203 **/ + regFifoDiagnostic_4_w = 0x04, /** Universal with Exceptions, pg 196 **/ + regVcoDiagnostic_4_w = 0x02, /** Undocumented? **/ + }; + +enum Registers3 + { + regTxFree_3_w = 0x0c, /** Universal **/ + regRxFree_3_w = 0x0a, /** Universal with Exceptions, pg 125 **/ + regResetMediaOptions_3_w = 0x08, /** Media Options on B Revision, **/ + /** Reset Options on Non-B Revision **/ + regMacControl_3_w = 0x06, /** Universal with Exceptions, pg 199 **/ + regMaxPktSize_3_w = 0x04, /** 905B Revision Only **/ + regInternalConfig_3_l = 0x00, /** Universal, different bit **/ + /** definitions, pg 59 **/ + }; + +enum Registers2 + { + regResetOptions_2_w = 0x0c, /** 905B Revision Only **/ + regStationMask_2_3w = 0x06, /** Universal with Exceptions, pg 127 **/ + regStationAddress_2_3w = 0x00, /** Universal with Exceptions, pg 127 **/ + }; + +enum Registers1 + { + regRxStatus_1_w = 0x0a, /** 90X Revision Only, Pg 126 **/ + }; + +enum Registers0 + { + regEepromData_0_w = 0x0c, /** Universal **/ + regEepromCommand_0_w = 0x0a, /** Universal **/ + regBiosRomData_0_b = 0x08, /** 905B Revision Only **/ + regBiosRomAddr_0_l = 0x04, /** 905B Revision Only **/ + }; + + +/*** The names for the eight register windows ***/ +enum Windows + { + winPowerVlan7 = 0x07, + winStatistics6 = 0x06, + winTxRxControl5 = 0x05, + winDiagnostics4 = 0x04, + winTxRxOptions3 = 0x03, + winAddressing2 = 0x02, + winUnused1 = 0x01, + winEepromBios0 = 0x00, + }; + + +/*** Command definitions for the 3c90X ***/ +enum Commands + { + cmdGlobalReset = 0x00, /** Universal with Exceptions, pg 151 **/ + cmdSelectRegisterWindow = 0x01, /** Universal **/ + cmdEnableDcConverter = 0x02, /** **/ + cmdRxDisable = 0x03, /** **/ + cmdRxEnable = 0x04, /** Universal **/ + cmdRxReset = 0x05, /** Universal **/ + cmdStallCtl = 0x06, /** Universal **/ + cmdTxEnable = 0x09, /** Universal **/ + cmdTxDisable = 0x0A, /** **/ + cmdTxReset = 0x0B, /** Universal **/ + cmdRequestInterrupt = 0x0C, /** **/ + cmdAcknowledgeInterrupt = 0x0D, /** Universal **/ + cmdSetInterruptEnable = 0x0E, /** Universal **/ + cmdSetIndicationEnable = 0x0F, /** Universal **/ + cmdSetRxFilter = 0x10, /** Universal **/ + cmdSetRxEarlyThresh = 0x11, /** **/ + cmdSetTxStartThresh = 0x13, /** **/ + cmdStatisticsEnable = 0x15, /** **/ + cmdStatisticsDisable = 0x16, /** **/ + cmdDisableDcConverter = 0x17, /** **/ + cmdSetTxReclaimThresh = 0x18, /** **/ + cmdSetHashFilterBit = 0x19, /** **/ + }; + + +/*** Values for int status register bitmask **/ +#define INT_INTERRUPTLATCH (1<<0) +#define INT_HOSTERROR (1<<1) +#define INT_TXCOMPLETE (1<<2) +#define INT_RXCOMPLETE (1<<4) +#define INT_RXEARLY (1<<5) +#define INT_INTREQUESTED (1<<6) +#define INT_UPDATESTATS (1<<7) +#define INT_LINKEVENT (1<<8) +#define INT_DNCOMPLETE (1<<9) +#define INT_UPCOMPLETE (1<<10) +#define INT_CMDINPROGRESS (1<<12) +#define INT_WINDOWNUMBER (7<<13) + + +/*** TX descriptor ***/ +typedef struct + { + unsigned int DnNextPtr; + unsigned int FrameStartHeader; + unsigned int HdrAddr; + unsigned int HdrLength; + unsigned int DataAddr; + unsigned int DataLength; + } + TXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */ + +/*** RX descriptor ***/ +typedef struct + { + unsigned int UpNextPtr; + unsigned int UpPktStatus; + unsigned int DataAddr; + unsigned int DataLength; + } + RXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */ + +/*** Global variables ***/ +static struct + { + unsigned int is3c556; + unsigned char isBrev; + unsigned char CurrentWindow; + unsigned int IOAddr; + unsigned char HWAddr[ETH_ALEN]; + TXD TransmitDPD; + RXD ReceiveUPD; + } + INF_3C90X; + + +/*** a3c90x_internal_IssueCommand: sends a command to the 3c90x card + ***/ +static int +a3c90x_internal_IssueCommand(int ioaddr, int cmd, int param) + { + unsigned int val; + + /** Build the cmd. **/ + val = cmd; + val <<= 11; + val |= param; + + /** Send the cmd to the cmd register **/ + outw(val, ioaddr + regCommandIntStatus_w); + + /** Wait for the cmd to complete, if necessary **/ + while (inw(ioaddr + regCommandIntStatus_w) & INT_CMDINPROGRESS); + + return 0; + } + + +/*** a3c90x_internal_SetWindow: selects a register window set. + ***/ +static int +a3c90x_internal_SetWindow(int ioaddr, int window) + { + + /** Window already as set? **/ + if (INF_3C90X.CurrentWindow == window) return 0; + + /** Issue the window command. **/ + a3c90x_internal_IssueCommand(ioaddr, cmdSelectRegisterWindow, window); + INF_3C90X.CurrentWindow = window; + + return 0; + } + + +/*** a3c90x_internal_ReadEeprom - read data from the serial eeprom. + ***/ +static unsigned short +a3c90x_internal_ReadEeprom(int ioaddr, int address) + { + unsigned short val; + + /** Select correct window **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winEepromBios0); + + /** Make sure the eeprom isn't busy **/ + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + + /** Read the value. **/ + if (INF_3C90X.is3c556) + { + outw(address + (0x230), ioaddr + regEepromCommand_0_w); + } + else + { + outw(address + ((0x02)<<6), ioaddr + regEepromCommand_0_w); + } + + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + val = inw(ioaddr + regEepromData_0_w); + + return val; + } + + +#ifdef CFG_3C90X_BOOTROM_FIX +/*** a3c90x_internal_WriteEepromWord - write a physical word of + *** data to the onboard serial eeprom (not the BIOS prom, but the + *** nvram in the card that stores, among other things, the MAC + *** address). + ***/ +static int +a3c90x_internal_WriteEepromWord(int ioaddr, int address, unsigned short value) + { + /** Select register window **/ + a3c90x_internal_SetWindow(ioaddr, winEepromBios0); + + /** Verify Eeprom not busy **/ + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + + /** Issue WriteEnable, and wait for completion. **/ + outw(0x30, ioaddr + regEepromCommand_0_w); + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + + /** Issue EraseRegister, and wait for completion. **/ + outw(address + ((0x03)<<6), ioaddr + regEepromCommand_0_w); + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + + /** Send the new data to the eeprom, and wait for completion. **/ + outw(value, ioaddr + regEepromData_0_w); + outw(0x30, ioaddr + regEepromCommand_0_w); + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + + /** Burn the new data into the eeprom, and wait for completion. **/ + outw(address + ((0x01)<<6), ioaddr + regEepromCommand_0_w); + while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); + + return 0; + } +#endif + +#ifdef CFG_3C90X_BOOTROM_FIX +/*** a3c90x_internal_WriteEeprom - write data to the serial eeprom, + *** and re-compute the eeprom checksum. + ***/ +static int +a3c90x_internal_WriteEeprom(int ioaddr, int address, unsigned short value) + { + int cksum = 0,v; + int i; + int maxAddress, cksumAddress; + + if (INF_3C90X.isBrev) + { + maxAddress=0x1f; + cksumAddress=0x20; + } + else + { + maxAddress=0x16; + cksumAddress=0x17; + } + + /** Write the value. **/ + if (a3c90x_internal_WriteEepromWord(ioaddr, address, value) == -1) + return -1; + + /** Recompute the checksum. **/ + for(i=0;i<=maxAddress;i++) + { + v = a3c90x_internal_ReadEeprom(ioaddr, i); + cksum ^= (v & 0xFF); + cksum ^= ((v>>8) & 0xFF); + } + /** Write the checksum to the location in the eeprom **/ + if (a3c90x_internal_WriteEepromWord(ioaddr, cksumAddress, cksum) == -1) + return -1; + + return 0; + } +#endif + +/*** a3c90x_reset: exported function that resets the card to its default + *** state. This is so the Linux driver can re-set the card up the way + *** it wants to. If CFG_3C90X_PRESERVE_XCVR is defined, then the reset will + *** not alter the selected transceiver that we used to download the boot + *** image. + ***/ +static void a3c90x_reset(void) + { +#ifdef CFG_3C90X_PRESERVE_XCVR + int cfg; + /** Read the current InternalConfig value. **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l); +#endif + + /** Send the reset command to the card **/ + outputf("Issuing RESET:"); + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdGlobalReset, 0); + + /** wait for reset command to complete **/ + while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS); + + /** global reset command resets station mask, non-B revision cards + ** require explicit reset of values + **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2); + outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+0); + outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2); + outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4); + +#ifdef CFG_3C90X_PRESERVE_XCVR + /** Re-set the original InternalConfig value from before reset **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l); + + /** enable DC converter for 10-Base-T **/ + if ((cfg&0x0300) == 0x0300) + { + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); + } +#endif + + /** Issue transmit reset, wait for command completion **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxReset, 0); + while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) + ; + if (! INF_3C90X.isBrev) + outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b); + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); + + /** + ** reset of the receiver on B-revision cards re-negotiates the link + ** takes several seconds (a computer eternity) + **/ + if (INF_3C90X.isBrev) + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x04); + else + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x00); + while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS); + ; + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0); + + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, + cmdSetInterruptEnable, 0); + /** enable rxComplete and txComplete **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, + cmdSetIndicationEnable, 0x0014); + /** acknowledge any pending status flags **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, + cmdAcknowledgeInterrupt, 0x661); + + return; + } + + + +/*** a3c90x_transmit: exported function that transmits a packet. Does not + *** return any particular status. Parameters are: + *** dest_addr[6] - destination address, ethernet; + *** proto - protocol type (ARP, IP, etc); + *** size - size of the non-header part of the packet that needs transmitted; + *** pkt - the pointer to the packet data itself. + ***/ +static void +a3c90x_transmit(const char *dest_addr, unsigned int proto, + unsigned int size, const char *pkt) + { + + struct eth_hdr + { + unsigned char dst_addr[ETH_ALEN]; + unsigned char src_addr[ETH_ALEN]; + unsigned short type; + } hdr; + + unsigned char status; + unsigned i, retries; + + for (retries=0; retries < XMIT_RETRIES ; retries++) + { + /** Stall the download engine **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdStallCtl, 2); + + /** Make sure the card is not waiting on us **/ + inw(INF_3C90X.IOAddr + regCommandIntStatus_w); + inw(INF_3C90X.IOAddr + regCommandIntStatus_w); + + while (inw(INF_3C90X.IOAddr+regCommandIntStatus_w) & + INT_CMDINPROGRESS) + ; + + /** Set the ethernet packet type **/ + hdr.type = htons(proto); + + /** Copy the destination address **/ + memcpy(hdr.dst_addr, dest_addr, ETH_ALEN); + + /** Copy our MAC address **/ + memcpy(hdr.src_addr, INF_3C90X.HWAddr, ETH_ALEN); + + /** Setup the DPD (download descriptor) **/ + INF_3C90X.TransmitDPD.DnNextPtr = 0; + /** set notification for transmission completion (bit 15) **/ + INF_3C90X.TransmitDPD.FrameStartHeader = (size + sizeof(hdr)) | 0x8000; + INF_3C90X.TransmitDPD.HdrAddr = virt_to_bus(&hdr); + INF_3C90X.TransmitDPD.HdrLength = sizeof(hdr); + INF_3C90X.TransmitDPD.DataAddr = virt_to_bus(pkt); + INF_3C90X.TransmitDPD.DataLength = size + (1<<31); + + /** Send the packet **/ + outl(virt_to_bus(&(INF_3C90X.TransmitDPD)), + INF_3C90X.IOAddr + regDnListPtr_l); + + /** End Stall and Wait for upload to complete. **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdStallCtl, 3); + while(inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) + ; + + /** Wait for NIC Transmit to Complete **/ + oneshot_start_ms(10); /* Give it 10 ms */ + while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0004) && + oneshot_running()) + ; + + if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0004)) + { + outputf("3C90X: Tx Timeout"); + continue; + } + + status = inb(INF_3C90X.IOAddr + regTxStatus_b); + + /** acknowledge transmit interrupt by writing status **/ + outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); + + /** successful completion (sans "interrupt Requested" bit) **/ + if ((status & 0xbf) == 0x80) + return; + + outputf("3C90X: Status (%hhX)", status); + /** check error codes **/ + if (status & 0x02) + { + outputf("3C90X: Tx Reclaim Error (%hhX)", status); + a3c90x_reset(); + } + else if (status & 0x04) + { + outputf("3C90X: Tx Status Overflow (%hhX)", status); + for (i=0; i<32; i++) + outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); + /** must re-enable after max collisions before re-issuing tx **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); + } + else if (status & 0x08) + { + outputf("3C90X: Tx Max Collisions (%hhX)", status); + /** must re-enable after max collisions before re-issuing tx **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); + } + else if (status & 0x10) + { + outputf("3C90X: Tx Underrun (%hhX)", status); + a3c90x_reset(); + } + else if (status & 0x20) + { + outputf("3C90X: Tx Jabber (%hhX)", status); + a3c90x_reset(); + } + else if ((status & 0x80) != 0x80) + { + outputf("3C90X: Internal Error - Incomplete Transmission (%hhX)", + status); + a3c90x_reset(); + } + } + + /** failed after RETRY attempts **/ + outputf("Failed to send after %d retries", retries); + return; + + } + + + +/*** a3c90x_poll: exported routine that waits for a certain length of time + *** for a packet, and if it sees none, returns 0. This routine should + *** copy the packet to nic->packet if it gets a packet and set the size + *** in nic->packetlen. Return 1 if a packet was found. + ***/ +static int +a3c90x_poll(struct nic *nic, int retrieve) + { + int i, errcode; + + if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0010)) + { + return 0; + } + + if ( ! retrieve ) return 1; + + /** we don't need to acknowledge rxComplete -- the upload engine + ** does it for us. + **/ + + /** Build the up-load descriptor **/ + INF_3C90X.ReceiveUPD.UpNextPtr = 0; + INF_3C90X.ReceiveUPD.UpPktStatus = 0; + INF_3C90X.ReceiveUPD.DataAddr = virt_to_bus(nic->packet); + INF_3C90X.ReceiveUPD.DataLength = 1536 + (1<<31); + + /** Submit the upload descriptor to the NIC **/ + outl(virt_to_bus(&(INF_3C90X.ReceiveUPD)), + INF_3C90X.IOAddr + regUpListPtr_l); + + /** Wait for upload completion (upComplete(15) or upError (14)) **/ + for(i=0;i<40000;i++); + while((INF_3C90X.ReceiveUPD.UpPktStatus & ((1<<14) | (1<<15))) == 0) + for(i=0;i<40000;i++); + + /** Check for Error (else we have good packet) **/ + if (INF_3C90X.ReceiveUPD.UpPktStatus & (1<<14)) + { + errcode = INF_3C90X.ReceiveUPD.UpPktStatus; + if (errcode & (1<<16)) + outputf("3C90X: Rx Overrun (%hX)",errcode>>16); + else if (errcode & (1<<17)) + outputf("3C90X: Runt Frame (%hX)",errcode>>16); + else if (errcode & (1<<18)) + outputf("3C90X: Alignment Error (%hX)",errcode>>16); + else if (errcode & (1<<19)) + outputf("3C90X: CRC Error (%hX)",errcode>>16); + else if (errcode & (1<<20)) + outputf("3C90X: Oversized Frame (%hX)",errcode>>16); + else + outputf("3C90X: Packet error (%hX)",errcode>>16); + return 0; + } + + /** Ok, got packet. Set length in nic->packetlen. **/ + nic->packetlen = (INF_3C90X.ReceiveUPD.UpPktStatus & 0x1FFF); + + return 1; + } + + + +/*** a3c90x_disable: exported routine to disable the card. What's this for? + *** the eepro100.c driver didn't have one, so I just left this one empty too. + *** Ideas anyone? + *** Must turn off receiver at least so stray packets will not corrupt memory + *** [Ken] + ***/ +void a3c90x_disable(struct dev *dev) +{ + /* reset and disable merge */ + a3c90x_reset(); + /* Disable the receiver and transmitter. */ + outw(cmdRxDisable, INF_3C90X.IOAddr + regCommandIntStatus_w); + outw(cmdTxDisable, INF_3C90X.IOAddr + regCommandIntStatus_w); +} + + +/*** a3c90x_probe: exported routine to probe for the 3c905 card and perform + *** initialization. If this routine is called, the pci functions did find the + *** card. We just have to init it here. + ***/ +static int a3c90x_probe(struct pci_dev * pci, void * data) +{ + struct nic *nic = (struct nic *)data; + INF_3C90X.is3c556 = (pci->did == 0x6055); + + int i, c; + unsigned short eeprom[0x21]; + unsigned int cfg; + unsigned int mopt; + unsigned int mstat; + unsigned short linktype; +#define HWADDR_OFFSET 10 + + unsigned long ioaddr = 0; + for (i = 0; i < 6; i++) { + if (pci->bars[i].type == PCI_BAR_IO) { + ioaddr = pci->bars[i].addr; + break; + } + } + + if (ioaddr == 0) + return 0; +/* + adjust_pci_dev(pci); +*/ + nic->ioaddr = ioaddr & ~3; + nic->irqno = 0; + + INF_3C90X.IOAddr = ioaddr & ~3; + INF_3C90X.CurrentWindow = 255; + switch (a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, 0x03)) + { + case 0x9000: /** 10 Base TPO **/ + case 0x9001: /** 10/100 T4 **/ + case 0x9050: /** 10/100 TPO **/ + case 0x9051: /** 10 Base Combo **/ + INF_3C90X.isBrev = 0; + break; + + case 0x9004: /** 10 Base TPO **/ + case 0x9005: /** 10 Base Combo **/ + case 0x9006: /** 10 Base TPO and Base2 **/ + case 0x900A: /** 10 Base FL **/ + case 0x9055: /** 10/100 TPO **/ + case 0x9056: /** 10/100 T4 **/ + case 0x905A: /** 10 Base FX **/ + default: + INF_3C90X.isBrev = 1; + break; + } + + /** Load the EEPROM contents **/ + if (INF_3C90X.isBrev) + { + for(i=0;i<=0x20;i++) + { + eeprom[i] = a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, i); + } + +#ifdef CFG_3C90X_BOOTROM_FIX + /** Set xcvrSelect in InternalConfig in eeprom. **/ + /* only necessary for 3c905b revision cards with boot PROM bug!!! */ + a3c90x_internal_WriteEeprom(INF_3C90X.IOAddr, 0x13, 0x0160); +#endif + +#ifdef CFG_3C90X_XCVR + if (CFG_3C90X_XCVR == 255) + { + /** Clear the LanWorks register **/ + a3c90x_internal_WriteEeprom(INF_3C90X.IOAddr, 0x16, 0); + } + else + { + /** Set the selected permanent-xcvrSelect in the + ** LanWorks register + **/ + a3c90x_internal_WriteEeprom(INF_3C90X.IOAddr, 0x16, + XCVR_MAGIC + ((CFG_3C90X_XCVR) & 0x000F)); + } +#endif + } + else + { + for(i=0;i<=0x17;i++) + { + eeprom[i] = a3c90x_internal_ReadEeprom(INF_3C90X.IOAddr, i); + } + } + + /** Print identification message **/ +#ifdef CFG_3C90X_BOOTROM_FIX + if (INF_3C90X.isBrev) + { + outputf("NOTE: 3c905b bootrom fix enabled; has side " + "effects. See 3c90x.txt for info."); + } +#endif + + /** Retrieve the Hardware address and print it on the screen. **/ + INF_3C90X.HWAddr[0] = eeprom[HWADDR_OFFSET + 0]>>8; + INF_3C90X.HWAddr[1] = eeprom[HWADDR_OFFSET + 0]&0xFF; + INF_3C90X.HWAddr[2] = eeprom[HWADDR_OFFSET + 1]>>8; + INF_3C90X.HWAddr[3] = eeprom[HWADDR_OFFSET + 1]&0xFF; + INF_3C90X.HWAddr[4] = eeprom[HWADDR_OFFSET + 2]>>8; + INF_3C90X.HWAddr[5] = eeprom[HWADDR_OFFSET + 2]&0xFF; + outputf("MAC Address = %!", INF_3C90X.HWAddr); + + /** 3C556: Invert MII power **/ + if (INF_3C90X.is3c556) { + unsigned int tmp; + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2); + tmp = inw(INF_3C90X.IOAddr + regResetOptions_2_w); + tmp |= 0x4000; + outw(tmp, INF_3C90X.IOAddr + regResetOptions_2_w); + } + + /* Test if the link is good, if not continue */ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winDiagnostics4); + mstat = inw(INF_3C90X.IOAddr + regMediaStatus_4_w); + if((mstat & (1<<11)) == 0) { + outputf("Valid link not established"); + return 0; + } + + /** Program the MAC address into the station address registers **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2); + outw(htons(eeprom[HWADDR_OFFSET + 0]), INF_3C90X.IOAddr + regStationAddress_2_3w); + outw(htons(eeprom[HWADDR_OFFSET + 1]), INF_3C90X.IOAddr + regStationAddress_2_3w+2); + outw(htons(eeprom[HWADDR_OFFSET + 2]), INF_3C90X.IOAddr + regStationAddress_2_3w+4); + outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+0); + outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2); + outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4); + + /** Fill in our entry in the etherboot arp table **/ +/* XXX ? for lwip? + for(i=0;inode_addr[i] = (eeprom[HWADDR_OFFSET + i/2] >> (8*((i&1)^1))) & 0xff; +*/ + + /** Read the media options register, print a message and set default + ** xcvr. + ** + ** Uses Media Option command on B revision, Reset Option on non-B + ** revision cards -- same register address + **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + mopt = inw(INF_3C90X.IOAddr + regResetMediaOptions_3_w); + + /** mask out VCO bit that is defined as 10baseFL bit on B-rev cards **/ + if (! INF_3C90X.isBrev) + { + mopt &= 0x7F; + } + + outputf("Connectors present: "); + c = 0; + linktype = 0x0008; + if (mopt & 0x01) + { + outputf("%s100Base-T4",(c++)?", ":""); + linktype = 0x0006; + } + if (mopt & 0x04) + { + outputf("%s100Base-FX",(c++)?", ":""); + linktype = 0x0005; + } + if (mopt & 0x10) + { + outputf("%s10Base-2",(c++)?", ":""); + linktype = 0x0003; + } + if (mopt & 0x20) + { + outputf("%sAUI",(c++)?", ":""); + linktype = 0x0001; + } + if (mopt & 0x40) + { + outputf("%sMII",(c++)?", ":""); + linktype = 0x0006; + } + if ((mopt & 0xA) == 0xA) + { + outputf("%s10Base-T / 100Base-TX",(c++)?", ":""); + linktype = 0x0008; + } + else if ((mopt & 0xA) == 0x2) + { + outputf("%s100Base-TX",(c++)?", ":""); + linktype = 0x0008; + } + else if ((mopt & 0xA) == 0x8) + { + outputf("%s10Base-T",(c++)?", ":""); + linktype = 0x0008; + } + outputf("."); + + /** Determine transceiver type to use, depending on value stored in + ** eeprom 0x16 + **/ + if (INF_3C90X.isBrev) + { + if ((eeprom[0x16] & 0xFF00) == XCVR_MAGIC) + { + /** User-defined **/ + linktype = eeprom[0x16] & 0x000F; + } + } + else + { +#ifdef CFG_3C90X_XCVR + if (CFG_3C90X_XCVR != 255) + linktype = CFG_3C90X_XCVR; +#endif /* CFG_3C90X_XCVR */ + + /** I don't know what MII MAC only mode is!!! **/ + if (linktype == 0x0009) + { + if (INF_3C90X.isBrev) + outputf("WARNING: MII External MAC Mode only supported on B-revision " + "cards!!!!\nFalling Back to MII Mode\n"); + linktype = 0x0006; + } + } + + /** enable DC converter for 10-Base-T **/ + if (linktype == 0x0003) + { + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); + } + + /** Set the link to the type we just determined. **/ + a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l); + cfg &= ~(0xF<<20); + cfg |= (linktype<<20); + outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l); + + /** Now that we set the xcvr type, reset the Tx and Rx, re-enable. **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxReset, 0x00); + while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) + ; + + if (!INF_3C90X.isBrev) + outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b); + + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); + + /** + ** reset of the receiver on B-revision cards re-negotiates the link + ** takes several seconds (a computer eternity) + **/ + if (INF_3C90X.isBrev) + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x04); + else + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x00); + while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) + ; + + /** Set the RX filter = receive only individual pkts & multicast & bcast. **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04); + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0); + + + /** + ** set Indication and Interrupt flags , acknowledge any IRQ's + **/ + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0); + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, + cmdSetIndicationEnable, 0x0014); + a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, + cmdAcknowledgeInterrupt, 0x661); + + /* * Set our exported functions **/ + nic->poll = a3c90x_poll; + nic->transmit = a3c90x_transmit; + + return 1; +} + +static struct pci_id a3c90x_nics[] = { +/* Original 90x revisions: */ +PCI_ROM(0x10b7, 0x6055, "3c556", "3C556"), /* Huricane */ +PCI_ROM(0x10b7, 0x9000, "3c905-tpo", "3Com900-TPO"), /* 10 Base TPO */ +PCI_ROM(0x10b7, 0x9001, "3c905-t4", "3Com900-Combo"), /* 10/100 T4 */ +PCI_ROM(0x10b7, 0x9050, "3c905-tpo100", "3Com905-TX"), /* 100 Base TX / 10/100 TPO */ +PCI_ROM(0x10b7, 0x9051, "3c905-combo", "3Com905-T4"), /* 100 Base T4 / 10 Base Combo */ +/* Newer 90xB revisions: */ +PCI_ROM(0x10b7, 0x9004, "3c905b-tpo", "3Com900B-TPO"), /* 10 Base TPO */ +PCI_ROM(0x10b7, 0x9005, "3c905b-combo", "3Com900B-Combo"), /* 10 Base Combo */ +PCI_ROM(0x10b7, 0x9006, "3c905b-tpb2", "3Com900B-2/T"), /* 10 Base TP and Base2 */ +PCI_ROM(0x10b7, 0x900a, "3c905b-fl", "3Com900B-FL"), /* 10 Base FL */ +PCI_ROM(0x10b7, 0x9055, "3c905b-tpo100", "3Com905B-TX"), /* 10/100 TPO */ +PCI_ROM(0x10b7, 0x9056, "3c905b-t4", "3Com905B-T4"), /* 10/100 T4 */ +PCI_ROM(0x10b7, 0x9058, "3c905b-9058", "3Com905B-9058"), /* Cyclone 10/100/BNC */ +PCI_ROM(0x10b7, 0x905a, "3c905b-fx", "3Com905B-FL"), /* 100 Base FX / 10 Base FX */ +/* Newer 90xC revision: */ +PCI_ROM(0x10b7, 0x9200, "3c905c-tpo", "3Com905C-TXM"), /* 10/100 TPO (3C905C-TXM) */ +PCI_ROM(0x10b7, 0x9202, "3c920b-emb-ati", "3c920B-EMB-WNM (ATI Radeon 9100 IGP)"), /* 3c920B-EMB-WNM (ATI Radeon 9100 IGP) */ +PCI_ROM(0x10b7, 0x9210, "3c920b-emb-wnm","3Com20B-EMB WNM"), +PCI_ROM(0x10b7, 0x9800, "3c980", "3Com980-Cyclone"), /* Cyclone */ +PCI_ROM(0x10b7, 0x9805, "3c9805", "3Com9805"), /* Dual Port Server Cyclone */ +PCI_ROM(0x10b7, 0x7646, "3csoho100-tx", "3CSOHO100-TX"), /* Hurricane */ +PCI_ROM(0x10b7, 0x4500, "3c450", "3Com450 HomePNA Tornado"), +PCI_ROM(0x10b7, 0x1201, "3c982a", "3Com982A"), +PCI_ROM(0x10b7, 0x1202, "3c982b", "3Com982B"), +}; + +struct pci_driver a3c90x_driver = { + .name = "3C90X", + .probe = a3c90x_probe, + .ids = a3c90x_nics, + .id_count = sizeof(a3c90x_nics)/sizeof(a3c90x_nics[0]), +}; diff --git a/net/etherboot-compat.h b/net/etherboot-compat.h new file mode 100644 index 0000000..6c96458 --- /dev/null +++ b/net/etherboot-compat.h @@ -0,0 +1,18 @@ +#define ETH_ALEN 6 + +struct dev { + void (*disable) (struct dev *dev); +}; + +struct nic { + char * packet; + int packetlen; + + unsigned int ioaddr; + unsigned int irqno; + + int (*poll) (struct nic *nic, int retrieve); + void (*transmit) (const char *dest_addr, unsigned int proto, unsigned int size, const char *pkt); +}; + +#define virt_to_bus(x) ((unsigned long)x)