X-Git-Url: http://git.joshuawise.com/netwatch.git/blobdiff_plain/f23390bfddcc23940178f04c6745d9c7fcf9d1ea..d6f56afa7470cf4c29f4f9fa4bf2dd1bd0ba9193:/aseg/aseg.asm?ds=sidebyside

diff --git a/aseg/aseg.asm b/aseg/aseg.asm
index 51a2811..7380dc0 100644
--- a/aseg/aseg.asm
+++ b/aseg/aseg.asm
@@ -1,130 +1,44 @@
-	org 0x0
+	org 0xA8000
 [bits 16]
 entry:
-;	mov al, 0x01		; Say where we are.
-;	out 0x80, al
-	mov ax, 0xA800
-	mov ds, ax		; Take us out of flat unreal mode, and
-	mov es, ax		; put us in true real mode.
+	mov ax, 0xA800			; Take us out of flat unreal mode,
+	mov ds, ax			; and put us in true real mode.
+	mov es, ax
 	mov fs, ax
 	mov gs, ax
 	mov ss, ax
-	jmp 0xA800:entry2		; Long jump to a correct cs.
+	jmp 0xA800:(entry2-0xA8000)	; Long jump to a correct cs.
 entry2:
-;	mov al, 0x02
-;	out 0x80, al
-	lgdt [gdtr]			; Set up a new GDT.
+	lgdt [(gdtr-0xA8000)]		; Set up a new GDT.
 	mov eax, 0x1
 	mov cr0, eax			; ... and enter pmode!
-	mov al, 0x03			; Say we got here.
-	out 0x80, al
-	jmp long 0x10:(continue+0xA8000)	; Now longjmp into the new code.
+	jmp long 0x10:continue		; Now longjmp into the new code.
 [bits 32]
 continue:
-;	mov al, 0x04			; Now we're in protected mode.
-;	out 0x80, al
-	
 	mov ax, 0x08			; Set up segment selectors.
 	mov ds, ax
 	mov es, ax
 	mov fs, ax
 	mov gs, ax
 	mov ss, ax
-	mov esp, 0x1fffffff
-
-;	mov al, 0x05
-;	out 0x80, al
-
-	mov al, [(cstat + 0xA8000)]
-	add al, 1
-	out 0x80, al
-	mov [(cstat + 0xA8000)], al
-	
-	mov eax, 0x11223344
-	mov dword [(status + 0xA8000)], eax
-
-	mov dx, 0xCF8			; save off the old config value
-	in dword eax, dx
-	mov [esp-4], eax
-	
-	mov eax, 0x80000070		; load in smramc
-	out dx, eax
-	mov dx, 0xCFC
-	in byte al, dx
-	mov [esp-5], al
-	and al, 0xF3			; Allow graphics access
-	or al, 0x08
-	out dx, al
-	
-	xor eax, eax
-	mov dx, 0x3D4
-	in byte al, dx
-	mov [esp-6], al			; save off the old VGA command
-	mov al, 0xC
-	out dx, al
-	inc dx
-	in al, dx
-	mov ah, al
-	dec dx
-	mov al, 0xD
-	out dx, al
-	inc dx
-	in al, dx
-	shl eax, 1
-	add eax, 0xB8000		; yay
-	mov byte [eax+0], '1'
-	mov byte [eax+1], 0xA0
-	mov byte [eax+2], '5'
-	mov byte [eax+3], 0xA0
-	mov byte [eax+4], '-'
-	mov byte [eax+5], 0xA0
-	mov byte [eax+6], '4'
-	mov byte [eax+7], 0xA0
-	mov byte [eax+8], '1'
-	mov byte [eax+9], 0xA0
-	mov byte [eax+10], '2'
-	mov byte [eax+11], 0xA0
-	
-	mov dx, 0x3D4
-	mov al, [esp-6]
-	out dx, al
-	
-
-	mov dx, 0xCFC			; restore smramc
-	mov al, [esp-5]
-	out dx, al
-
-	mov dx, 0xCF8			; restore the old config value
-	mov eax, [esp-4]
-	out dx, eax
-
-	mov al, 0x40			; ack the periodic IRQ
-	mov dx, 0x834
-	out dx, al
+	mov esp, [dataptr]		; Load stack pointer.
 	
-	mov dx, 0x830
-	in al, dx
-	or al, 0x02			; now ack the SMI itself
-	and al, 0xBF
-	out dx, al
-	or al, 0x40
-	out dx, al
+	mov eax, [dataptr+4]		; Load target jump address
+	call eax			; then jump into C.
 
 	rsm				; and leave SMM
 
 	align 0x4
 gdtr:
-	db 0x27, 0x00
-	dd (gdt + 0xA8000)
+	db 0x17, 0x00
+	dd gdt
 	align 0x4
 gdt:
-	db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+	db 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00	; initial null entry
 	db 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x93, 0xCF, 0x00	; data segment
 	db 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x9B, 0xCF, 0x00	; code segment
-	db 0xFF, 0xFF, 0x00, 0x80, 0x0A, 0x9B, 0xCF, 0x00	; code segment for trampoline
 
-TIMES   512-($-$$) DB 0
-status:
-	dd 0xAA55AA55
-cstat:
-	db 0x00
+dataptr:
+	; 4 bytes of stack top
+	; 4 bytes of C entry point
+	; These show up