X-Git-Url: http://git.joshuawise.com/netwatch.git/blobdiff_plain/99182958d6e499bf78e5c496db45a7bfffba4504..a4b84140e3c9ae6f8739d72621581c5673606847:/net/3c90x.c diff --git a/net/3c90x.c b/net/3c90x.c index b0e5d6f..336e2a7 100644 --- a/net/3c90x.c +++ b/net/3c90x.c @@ -51,7 +51,7 @@ ** this is the number of times to retry the transmission -- this should ** be plenty **/ -#define XMIT_RETRIES 250 +#define XMIT_RETRIES 5 /*** Register definitions for the 3c905 ***/ enum Registers @@ -258,43 +258,29 @@ static struct nic nic; #define _outw(v,a) outw((a),(v)) #define _outb(v,a) outb((a),(v)) -/*** a3c90x_internal_IssueCommand: sends a command to the 3c90x card - ***/ -static int -a3c90x_internal_IssueCommand(int ioaddr, int cmd, int param) - { - unsigned int val; - - /** Build the cmd. **/ - val = cmd; - val <<= 11; - val |= param; - - /** Send the cmd to the cmd register **/ - _outw(val, ioaddr + regCommandIntStatus_w); +static int _issue_command(int ioaddr, int cmd, int param) +{ + outw(ioaddr + regCommandIntStatus_w, (cmd << 11) | param); - /** Wait for the cmd to complete, if necessary **/ - while (inw(ioaddr + regCommandIntStatus_w) & INT_CMDINPROGRESS); + while (inw(ioaddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) + ; - return 0; - } + return 0; +} /*** a3c90x_internal_SetWindow: selects a register window set. ***/ -static int -a3c90x_internal_SetWindow(int ioaddr, int window) - { - - /** Window already as set? **/ - if (INF_3C90X.CurrentWindow == window) return 0; +static int _set_window(int ioaddr, int window) +{ + if (INF_3C90X.CurrentWindow == window) + return 0; - /** Issue the window command. **/ - a3c90x_internal_IssueCommand(ioaddr, cmdSelectRegisterWindow, window); + _issue_command(ioaddr, cmdSelectRegisterWindow, window); INF_3C90X.CurrentWindow = window; - return 0; - } + return 0; +} /*** a3c90x_internal_ReadEeprom - read data from the serial eeprom. @@ -305,7 +291,7 @@ a3c90x_internal_ReadEeprom(int ioaddr, int address) unsigned short val; /** Select correct window **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winEepromBios0); + _set_window(INF_3C90X.IOAddr, winEepromBios0); /** Make sure the eeprom isn't busy **/ do @@ -345,7 +331,7 @@ static int a3c90x_internal_WriteEepromWord(int ioaddr, int address, unsigned short value) { /** Select register window **/ - a3c90x_internal_SetWindow(ioaddr, winEepromBios0); + _set_window(ioaddr, winEepromBios0); /** Verify Eeprom not busy **/ while((1<<15) & inw(ioaddr + regEepromCommand_0_w)); @@ -423,65 +409,57 @@ static void a3c90x_reset(void) #ifdef CFG_3C90X_PRESERVE_XCVR int cfg; /** Read the current InternalConfig value. **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + _set_window(INF_3C90X.IOAddr, winTxRxOptions3); cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l); #endif /** Send the reset command to the card **/ outputf("3c90x: issuing RESET"); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdGlobalReset, 0); - - /** wait for reset command to complete **/ - while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS); + _issue_command(INF_3C90X.IOAddr, cmdGlobalReset, 0); /** global reset command resets station mask, non-B revision cards ** require explicit reset of values **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2); + _set_window(INF_3C90X.IOAddr, winAddressing2); _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+0); _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2); _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4); #ifdef CFG_3C90X_PRESERVE_XCVR /** Re-set the original InternalConfig value from before reset **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + _set_window(INF_3C90X.IOAddr, winTxRxOptions3); _outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l); /** enable DC converter for 10-Base-T **/ if ((cfg&0x0300) == 0x0300) { - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); + _issue_command(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); } #endif /** Issue transmit reset, wait for command completion **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxReset, 0); - while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) - ; + _issue_command(INF_3C90X.IOAddr, cmdTxReset, 0); if (! INF_3C90X.isBrev) _outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); + _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); /** ** reset of the receiver on B-revision cards re-negotiates the link ** takes several seconds (a computer eternity) **/ if (INF_3C90X.isBrev) - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x04); + _issue_command(INF_3C90X.IOAddr, cmdRxReset, 0x04); else - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x00); - while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS); - ; - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0); + _issue_command(INF_3C90X.IOAddr, cmdRxReset, 0x00); + while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) + ; + _issue_command(INF_3C90X.IOAddr, cmdRxEnable, 0); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, - cmdSetInterruptEnable, 0); + _issue_command(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0); /** enable rxComplete and txComplete **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, - cmdSetIndicationEnable, 0x0014); + _issue_command(INF_3C90X.IOAddr, cmdSetIndicationEnable, 0x0014); /** acknowledge any pending status flags **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, - cmdAcknowledgeInterrupt, 0x661); + _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661); return; } @@ -498,123 +476,96 @@ static void a3c90x_reset(void) static void a3c90x_transmit(const char *dest_addr, unsigned int proto, unsigned int size, const char *pkt) - { - - struct eth_hdr +{ + struct eth_hdr { - unsigned char dst_addr[ETH_ALEN]; - unsigned char src_addr[ETH_ALEN]; - unsigned short type; + unsigned char dst_addr[ETH_ALEN]; + unsigned char src_addr[ETH_ALEN]; + unsigned short type; } hdr; + + unsigned char status; + unsigned int i, retries; - unsigned char status; - unsigned i, retries; - - for (retries=0; retries < XMIT_RETRIES ; retries++) + for (retries=0; retries < XMIT_RETRIES; retries++) { - /** Stall the download engine **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdStallCtl, 2); - - /** Make sure the card is not waiting on us **/ - inw(INF_3C90X.IOAddr + regCommandIntStatus_w); - inw(INF_3C90X.IOAddr + regCommandIntStatus_w); - - while (inw(INF_3C90X.IOAddr+regCommandIntStatus_w) & - INT_CMDINPROGRESS) - ; - - /** Set the ethernet packet type **/ - hdr.type = htons(proto); - - /** Copy the destination address **/ - memcpy(hdr.dst_addr, dest_addr, ETH_ALEN); - - /** Copy our MAC address **/ - memcpy(hdr.src_addr, INF_3C90X.HWAddr, ETH_ALEN); - - /** Setup the DPD (download descriptor) **/ - INF_3C90X.TransmitDPD.DnNextPtr = 0; - /** set notification for transmission completion (bit 15) **/ - INF_3C90X.TransmitDPD.FrameStartHeader = (size + sizeof(hdr)) | 0x8000; - INF_3C90X.TransmitDPD.HdrAddr = virt_to_bus(&hdr); - INF_3C90X.TransmitDPD.HdrLength = sizeof(hdr); - INF_3C90X.TransmitDPD.DataAddr = virt_to_bus(pkt); - INF_3C90X.TransmitDPD.DataLength = size + (1<<31); - - /** Send the packet **/ - _outl(virt_to_bus(&(INF_3C90X.TransmitDPD)), - INF_3C90X.IOAddr + regDnListPtr_l); - - /** End Stall and Wait for upload to complete. **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdStallCtl, 3); - while(inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) - ; - - /** Wait for NIC Transmit to Complete **/ - oneshot_start_ms(10); /* Give it 10 ms */ - while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0004) && - oneshot_running()) - ; - - if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0004)) - { - outputf("3C90X: Tx Timeout"); - continue; - } - - status = inb(INF_3C90X.IOAddr + regTxStatus_b); - - /** acknowledge transmit interrupt by writing status **/ - _outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); - - /** successful completion (sans "interrupt Requested" bit) **/ - if ((status & 0xbf) == 0x80) - return; - - outputf("3C90X: Status (%hhX)", status); - /** check error codes **/ - if (status & 0x02) - { - outputf("3C90X: Tx Reclaim Error (%hhX)", status); - a3c90x_reset(); - } - else if (status & 0x04) - { - outputf("3C90X: Tx Status Overflow (%hhX)", status); - for (i=0; i<32; i++) - _outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); - /** must re-enable after max collisions before re-issuing tx **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); - } - else if (status & 0x08) - { - outputf("3C90X: Tx Max Collisions (%hhX)", status); - /** must re-enable after max collisions before re-issuing tx **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); - } - else if (status & 0x10) - { - outputf("3C90X: Tx Underrun (%hhX)", status); - a3c90x_reset(); - } - else if (status & 0x20) - { - outputf("3C90X: Tx Jabber (%hhX)", status); - a3c90x_reset(); - } - else if ((status & 0x80) != 0x80) - { - outputf("3C90X: Internal Error - Incomplete Transmission (%hhX)", - status); - a3c90x_reset(); - } + if (retries != 0) + outputf("3c90x: retrying packet send (%d)", retries); + + _issue_command(INF_3C90X.IOAddr, cmdStallCtl, 2 /* Stall download */); + + hdr.type = htons(proto); + memcpy(hdr.dst_addr, dest_addr, ETH_ALEN); + memcpy(hdr.src_addr, INF_3C90X.HWAddr, ETH_ALEN); + + /** Setup the DPD (download descriptor) **/ + INF_3C90X.TransmitDPD.DnNextPtr = 0; + /** set notification for transmission completion (bit 15) **/ + INF_3C90X.TransmitDPD.FrameStartHeader = (size + sizeof(hdr)) | 0x8000; + INF_3C90X.TransmitDPD.HdrAddr = virt_to_bus(&hdr); + INF_3C90X.TransmitDPD.HdrLength = sizeof(hdr); + INF_3C90X.TransmitDPD.DataAddr = virt_to_bus(pkt); + INF_3C90X.TransmitDPD.DataLength = size + (1<<31); + + /** Send the packet **/ + outl(INF_3C90X.IOAddr + regDnListPtr_l, virt_to_bus(&(INF_3C90X.TransmitDPD))); + _issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */); + + oneshot_start_ms(100); + while((inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) && oneshot_running()) + ; + if (!oneshot_running()) + outputf("3c90x: Download engine pointer timeout"); + + oneshot_start_ms(10); /* Give it 10 ms */ + while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE) && oneshot_running()) + ; + + if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE)) + { + outputf("3c90x: tx timeout? txstat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b)); + outputf("3c90x: Gen sts %04x", inw(INF_3C90X.IOAddr + regCommandIntStatus_w)); + continue; + } + status = inb(INF_3C90X.IOAddr + regTxStatus_b); + outb(INF_3C90X.IOAddr + regTxStatus_b, 0x00); + + /** successful completion (sans "interrupt Requested" bit) **/ + if ((status & 0xbf) == 0x80) + return; + + outputf("3c90x: Status (%hhX)", status); + /** check error codes **/ + if (status & 0x02) + { + outputf("3c90x: Tx Reclaim Error (%hhX)", status); + a3c90x_reset(); + } else if (status & 0x04) { + outputf("3c90x: Tx Status Overflow (%hhX)", status); + for (i=0; i<32; i++) + _outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); + /** must re-enable after max collisions before re-issuing tx **/ + _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); + } else if (status & 0x08) { + outputf("3c90x: Tx Max Collisions (%hhX)", status); + /** must re-enable after max collisions before re-issuing tx **/ + _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); + } else if (status & 0x10) { + outputf("3c90x: Tx Underrun (%hhX)", status); + a3c90x_reset(); + } else if (status & 0x20) { + outputf("3c90x: Tx Jabber (%hhX)", status); + a3c90x_reset(); + } else if ((status & 0x80) != 0x80) { + outputf("3c90x: Internal Error - Incomplete Transmission (%hhX)", status); + a3c90x_reset(); + } } - /** failed after RETRY attempts **/ - outputf("Failed to send after %d retries", retries); - return; - - } + /** failed after RETRY attempts **/ + outputf("3c90x: Failed to send after %d retries", retries); + return; +} @@ -805,14 +756,6 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) "effects. See 3c90x.txt for info."); } #endif - { - unsigned int tmp; - for (tmp = 0; tmp < 0x10; tmp+= 4) - outputf("EEPROM adr %02x, data %04x %04x %04x %04x", - tmp, eeprom[tmp], eeprom[tmp+1], eeprom[tmp+2], eeprom[tmp+3]); - } - - /* Some type A... */ /** Retrieve the Hardware address and print it on the screen. **/ INF_3C90X.HWAddr[0] = eeprom[HWADDR_OFFSET + 0]>>8; @@ -832,14 +775,14 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) /** 3C556: Invert MII power **/ if (INF_3C90X.is3c556) { unsigned int tmp; - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2); + _set_window(INF_3C90X.IOAddr, winAddressing2); tmp = inw(INF_3C90X.IOAddr + regResetOptions_2_w); tmp |= 0x4000; _outw(tmp, INF_3C90X.IOAddr + regResetOptions_2_w); } /* Test if the link is good, if not continue */ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winDiagnostics4); + _set_window(INF_3C90X.IOAddr, winDiagnostics4); mstat = inw(INF_3C90X.IOAddr + regMediaStatus_4_w); if((mstat & (1<<11)) == 0) { outputf("Valid link not established"); @@ -847,7 +790,7 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) } /** Program the MAC address into the station address registers **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winAddressing2); + _set_window(INF_3C90X.IOAddr, winAddressing2); _outw(htons(eeprom[HWADDR_OFFSET + 0]), INF_3C90X.IOAddr + regStationAddress_2_3w); _outw(htons(eeprom[HWADDR_OFFSET + 1]), INF_3C90X.IOAddr + regStationAddress_2_3w+2); _outw(htons(eeprom[HWADDR_OFFSET + 2]), INF_3C90X.IOAddr + regStationAddress_2_3w+4); @@ -867,7 +810,7 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) ** Uses Media Option command on B revision, Reset Option on non-B ** revision cards -- same register address **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + _set_window(INF_3C90X.IOAddr, winTxRxOptions3); mopt = inw(INF_3C90X.IOAddr + regResetMediaOptions_3_w); /** mask out VCO bit that is defined as 10baseFL bit on B-rev cards **/ @@ -952,50 +895,43 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) /** enable DC converter for 10-Base-T **/ if (linktype == 0x0003) { - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); + _issue_command(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); } /** Set the link to the type we just determined. **/ - a3c90x_internal_SetWindow(INF_3C90X.IOAddr, winTxRxOptions3); + _set_window(INF_3C90X.IOAddr, winTxRxOptions3); cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l); cfg &= ~(0xF<<20); cfg |= (linktype<<20); _outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l); /** Now that we set the xcvr type, reset the Tx and Rx, re-enable. **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxReset, 0x00); - while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) - ; - + _issue_command(INF_3C90X.IOAddr, cmdTxReset, 0); if (!INF_3C90X.isBrev) _outb(0x01, INF_3C90X.IOAddr + regTxFreeThresh_b); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdTxEnable, 0); + _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); /** ** reset of the receiver on B-revision cards re-negotiates the link ** takes several seconds (a computer eternity) **/ if (INF_3C90X.isBrev) - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x04); + _issue_command(INF_3C90X.IOAddr, cmdRxReset, 0x04); else - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxReset, 0x00); - while (inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_CMDINPROGRESS) - ; + _issue_command(INF_3C90X.IOAddr, cmdRxReset, 0x00); /** Set the RX filter = receive only individual pkts & multicast & bcast. **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdRxEnable, 0); + _issue_command(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04); + _issue_command(INF_3C90X.IOAddr, cmdRxEnable, 0); /** ** set Indication and Interrupt flags , acknowledge any IRQ's **/ - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, - cmdSetIndicationEnable, 0x0014); - a3c90x_internal_IssueCommand(INF_3C90X.IOAddr, - cmdAcknowledgeInterrupt, 0x661); + _issue_command(INF_3C90X.IOAddr, cmdSetInterruptEnable, 0); + _issue_command(INF_3C90X.IOAddr, cmdSetIndicationEnable, 0x0014); + _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661); /* * Set our exported functions **/ nic.poll = a3c90x_poll;