X-Git-Url: http://git.joshuawise.com/netwatch.git/blobdiff_plain/68beefa85564e151acd18e12733897a5201fe67e..8cc40c4dafdeb2d5786695c19163c8e7cc757a46:/net/3c90x.c?ds=inline diff --git a/net/3c90x.c b/net/3c90x.c index 83a30ef..936f297 100644 --- a/net/3c90x.c +++ b/net/3c90x.c @@ -218,28 +218,24 @@ enum Commands #define INT_CMDINPROGRESS (1<<12) #define INT_WINDOWNUMBER (7<<13) - -/*** TX descriptor ***/ -typedef struct - { - unsigned int DnNextPtr; - unsigned int FrameStartHeader; - unsigned int HdrAddr; - unsigned int HdrLength; - unsigned int DataAddr; - unsigned int DataLength; - } - TXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */ +/* These structures are all 64-bit aligned, as needed for bus-mastering I/O. */ +typedef struct { + unsigned int addr; + unsigned int len; +} segment_t __attribute__ ((aligned(8))); + +typedef struct { + unsigned int next; + unsigned int hdr; + segment_t segments[64 /* XXX magic */]; +} txdesc_t __attribute__ ((aligned(8))); /*** RX descriptor ***/ -typedef struct - { - unsigned int UpNextPtr; - unsigned int UpPktStatus; - unsigned int DataAddr; - unsigned int DataLength; - } - RXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */ +typedef struct { + unsigned int next; + unsigned int status; + segment_t segments[64]; +} rxdesc_t __attribute__ ((aligned(8))); /*** Global variables ***/ static struct @@ -249,11 +245,14 @@ static struct unsigned char CurrentWindow; unsigned int IOAddr; unsigned char HWAddr[ETH_ALEN]; - TXD TransmitDPD; - RXD ReceiveUPD; } INF_3C90X; + static struct nic nic; +static txdesc_t txdesc; +static rxdesc_t rxdesc; +static struct pbuf *currecv; + #define _outl(v,a) outl((a),(v)) #define _outw(v,a) outw((a),(v)) @@ -407,13 +406,6 @@ a3c90x_internal_WriteEeprom(int ioaddr, int address, unsigned short value) ***/ static void a3c90x_reset(void) { -#ifdef CFG_3C90X_PRESERVE_XCVR - int cfg; - /** Read the current InternalConfig value. **/ - _set_window(INF_3C90X.IOAddr, winTxRxOptions3); - cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l); -#endif - /** Send the reset command to the card **/ outputf("3c90x: issuing RESET"); _issue_command(INF_3C90X.IOAddr, cmdGlobalReset, 0); @@ -426,18 +418,6 @@ static void a3c90x_reset(void) _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2); _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4); -#ifdef CFG_3C90X_PRESERVE_XCVR - /** Re-set the original InternalConfig value from before reset **/ - _set_window(INF_3C90X.IOAddr, winTxRxOptions3); - _outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l); - - /** enable DC converter for 10-Base-T **/ - if ((cfg&0x0300) == 0x0300) - { - _issue_command(INF_3C90X.IOAddr, cmdEnableDcConverter, 0); - } -#endif - /** Issue transmit reset, wait for command completion **/ _issue_command(INF_3C90X.IOAddr, cmdTxReset, 0); if (! INF_3C90X.isBrev) @@ -474,164 +454,170 @@ static void a3c90x_reset(void) *** size - size of the non-header part of the packet that needs transmitted; *** pkt - the pointer to the packet data itself. ***/ -static void -a3c90x_transmit(const char *dest_addr, unsigned int proto, - unsigned int size, const char *pkt) +static void _transmit(struct pbuf *p) { - struct eth_hdr - { - unsigned char dst_addr[ETH_ALEN]; - unsigned char src_addr[ETH_ALEN]; - unsigned short type; - } hdr; - unsigned char status; - unsigned int i, retries; - - for (retries=0; retries < XMIT_RETRIES; retries++) + static struct pbuf *oldpbuf = NULL; + unsigned int n, len; + + if (oldpbuf) { - if (retries != 0) - outputf("3c90x: retrying packet send (%d)", retries); - - _issue_command(INF_3C90X.IOAddr, cmdStallCtl, 2 /* Stall download */); - - hdr.type = htons(proto); - memcpy(hdr.dst_addr, dest_addr, ETH_ALEN); - memcpy(hdr.src_addr, INF_3C90X.HWAddr, ETH_ALEN); - - /** Setup the DPD (download descriptor) **/ - INF_3C90X.TransmitDPD.DnNextPtr = 0; - /** set notification for transmission completion (bit 15) **/ - INF_3C90X.TransmitDPD.FrameStartHeader = (size + sizeof(hdr)) | 0x8000; - INF_3C90X.TransmitDPD.HdrAddr = virt_to_bus(&hdr); - INF_3C90X.TransmitDPD.HdrLength = sizeof(hdr); - INF_3C90X.TransmitDPD.DataAddr = virt_to_bus(pkt); - INF_3C90X.TransmitDPD.DataLength = size + (1<<31); - - /** Send the packet **/ - outl(INF_3C90X.IOAddr + regDnListPtr_l, virt_to_bus(&(INF_3C90X.TransmitDPD))); - _issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */); - - oneshot_start_ms(100); - while((inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) && oneshot_running()) - ; - if (!oneshot_running()) - outputf("3c90x: Download engine pointer timeout"); - - oneshot_start_ms(10); /* Give it 10 ms */ while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE) && oneshot_running()) ; - if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE)) { outputf("3c90x: tx timeout? txstat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b)); outputf("3c90x: Gen sts %04x", inw(INF_3C90X.IOAddr + regCommandIntStatus_w)); - continue; } status = inb(INF_3C90X.IOAddr + regTxStatus_b); outb(INF_3C90X.IOAddr + regTxStatus_b, 0x00); - - /** successful completion (sans "interrupt Requested" bit) **/ - if ((status & 0xbf) == 0x80) - return; + pbuf_free(oldpbuf); + oldpbuf = NULL; + } - outputf("3c90x: Status (%hhX)", status); - /** check error codes **/ - if (status & 0x02) - { - outputf("3c90x: Tx Reclaim Error (%hhX)", status); - a3c90x_reset(); - } else if (status & 0x04) { - outputf("3c90x: Tx Status Overflow (%hhX)", status); - for (i=0; i<32; i++) - _outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); - /** must re-enable after max collisions before re-issuing tx **/ - _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); - } else if (status & 0x08) { - outputf("3c90x: Tx Max Collisions (%hhX)", status); - /** must re-enable after max collisions before re-issuing tx **/ - _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); - } else if (status & 0x10) { - outputf("3c90x: Tx Underrun (%hhX)", status); - a3c90x_reset(); - } else if (status & 0x20) { - outputf("3c90x: Tx Jabber (%hhX)", status); - a3c90x_reset(); - } else if ((status & 0x80) != 0x80) { - outputf("3c90x: Internal Error - Incomplete Transmission (%hhX)", status); - a3c90x_reset(); - } + _issue_command(INF_3C90X.IOAddr, cmdStallCtl, 2 /* Stall download */); + + /** Setup the DPD (download descriptor) **/ + txdesc.next = 0; + len = 0; + n = 0; + oldpbuf = p; + for (; p; p = p->next) + { + txdesc.segments[n].addr = v2p(p->payload); + txdesc.segments[n].len = p->len | (p->next ? 0 : (1 << 31)); + len += p->len; + pbuf_ref(p); + n++; + } + /** set notification for transmission completion (bit 15) **/ + txdesc.hdr = (len) | 0x8000; + + /** Send the packet **/ + outl(INF_3C90X.IOAddr + regDnListPtr_l, v2p(&txdesc)); + _issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */); + + oneshot_start_ms(10); + while((inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) && oneshot_running()) + ; + if (!oneshot_running()) + { + outputf("3c90x: Download engine pointer timeout"); + return; } - /** failed after RETRY attempts **/ - outputf("3c90x: Failed to send after %d retries", retries); - return; -} +#if 0 + /** successful completion (sans "interrupt Requested" bit) **/ + if ((status & 0xbf) == 0x80) + return; + outputf("3c90x: Status (%hhX)", status); + /** check error codes **/ + if (status & 0x02) + { + outputf("3c90x: Tx Reclaim Error (%hhX)", status); + a3c90x_reset(); + } else if (status & 0x04) { + outputf("3c90x: Tx Status Overflow (%hhX)", status); + for (i=0; i<32; i++) + _outb(0x00, INF_3C90X.IOAddr + regTxStatus_b); + /** must re-enable after max collisions before re-issuing tx **/ + _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); + } else if (status & 0x08) { + outputf("3c90x: Tx Max Collisions (%hhX)", status); + /** must re-enable after max collisions before re-issuing tx **/ + _issue_command(INF_3C90X.IOAddr, cmdTxEnable, 0); + } else if (status & 0x10) { + outputf("3c90x: Tx Underrun (%hhX)", status); + a3c90x_reset(); + } else if (status & 0x20) { + outputf("3c90x: Tx Jabber (%hhX)", status); + a3c90x_reset(); + } else if ((status & 0x80) != 0x80) { + outputf("3c90x: Internal Error - Incomplete Transmission (%hhX)", status); + a3c90x_reset(); + } +#endif +} +/* _setup_recv allocates and sets a pbuf from lwIP as the active receive + * packet chain for the 3c90x. The 3c90x must not be trying to receive + * when _setup_recv is being called. + */ +static void _setup_recv(struct nic *nic) +{ + struct pbuf *p, *q; + int i; + + rxdesc.status = 0; /* Clear it out in the very beginning. */ + + p = pbuf_alloc(PBUF_RAW, 1536 /* XXX magic Max len */, PBUF_POOL); + if (!p) + { + outputf("3c90x: out of memory for packet?"); + currecv = p; + return; + } + + rxdesc.next = 0; + rxdesc.status = 0; + for (i = 0, q = p; q; q = q->next, i++) + { + rxdesc.segments[i].addr = v2p(q->payload); + rxdesc.segments[i].len = q->len | (q->next ? 0 : (1 << 31)); + } + + outl(INF_3C90X.IOAddr + regUpListPtr_l, v2p(&rxdesc)); + + currecv = p; +} /*** a3c90x_poll: exported routine that waits for a certain length of time *** for a packet, and if it sees none, returns 0. This routine should *** copy the packet to nic->packet if it gets a packet and set the size *** in nic->packetlen. Return 1 if a packet was found. ***/ -static int -a3c90x_poll(struct nic *nic, int retrieve) - { - int i, errcode; - - if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0010)) - { - return 0; - } - - if ( ! retrieve ) return 1; - - /** we don't need to acknowledge rxComplete -- the upload engine - ** does it for us. - **/ - - /** Build the up-load descriptor **/ - INF_3C90X.ReceiveUPD.UpNextPtr = 0; - INF_3C90X.ReceiveUPD.UpPktStatus = 0; - INF_3C90X.ReceiveUPD.DataAddr = virt_to_bus(nic->packet); - INF_3C90X.ReceiveUPD.DataLength = 1536 + (1<<31); - - /** Submit the upload descriptor to the NIC **/ - _outl(virt_to_bus(&(INF_3C90X.ReceiveUPD)), - INF_3C90X.IOAddr + regUpListPtr_l); - - /** Wait for upload completion (upComplete(15) or upError (14)) **/ - for(i=0;i<40000;i++); - while((INF_3C90X.ReceiveUPD.UpPktStatus & ((1<<14) | (1<<15))) == 0) - for(i=0;i<40000;i++); - - /** Check for Error (else we have good packet) **/ - if (INF_3C90X.ReceiveUPD.UpPktStatus & (1<<14)) +static struct pbuf * _recv(struct nic *nic) +{ + int errcode; + struct pbuf *p; + + if (!currecv) + _setup_recv(nic); + + /* Nothing to do? */ + if ((rxdesc.status & ((1<<14) | (1<<15))) == 0) + return NULL; + + p = currecv; + + /** Check for Error (else we have good packet) **/ + if (rxdesc.status & (1<<14)) { - errcode = INF_3C90X.ReceiveUPD.UpPktStatus; - if (errcode & (1<<16)) - outputf("3C90X: Rx Overrun (%hX)",errcode>>16); - else if (errcode & (1<<17)) - outputf("3C90X: Runt Frame (%hX)",errcode>>16); - else if (errcode & (1<<18)) - outputf("3C90X: Alignment Error (%hX)",errcode>>16); - else if (errcode & (1<<19)) - outputf("3C90X: CRC Error (%hX)",errcode>>16); - else if (errcode & (1<<20)) - outputf("3C90X: Oversized Frame (%hX)",errcode>>16); - else - outputf("3C90X: Packet error (%hX)",errcode>>16); - return 0; + errcode = rxdesc.status; + if (errcode & (1<<16)) + outputf("3C90X: Rx Overrun (%hX)",errcode>>16); + else if (errcode & (1<<17)) + outputf("3C90X: Runt Frame (%hX)",errcode>>16); + else if (errcode & (1<<18)) + outputf("3C90X: Alignment Error (%hX)",errcode>>16); + else if (errcode & (1<<19)) + outputf("3C90X: CRC Error (%hX)",errcode>>16); + else if (errcode & (1<<20)) + outputf("3C90X: Oversized Frame (%hX)",errcode>>16); + else + outputf("3C90X: Packet error (%hX)",errcode>>16); + + pbuf_free(p); /* Bounce the old one before setting it up again. */ + _setup_recv(nic); + return NULL; } - /** Ok, got packet. Set length in nic->packetlen. **/ - nic->packetlen = (INF_3C90X.ReceiveUPD.UpPktStatus & 0x1FFF); - - return 1; - } - - + pbuf_realloc(p, rxdesc.status & 0x1FFF); /* Resize the packet to how large it actually is. */ + _setup_recv(nic); /* ..and light the NIC up again. */ + + return p; +} /*** a3c90x_disable: exported routine to disable the card. What's this for? *** the eepro100.c driver didn't have one, so I just left this one empty too. @@ -825,45 +811,44 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) linktype = 0x0008; if (mopt & 0x01) { - outputf("%s100Base-T4",(c++)?", ":""); + outputf(" 100Base-T4"); linktype = 0x0006; } if (mopt & 0x04) { - outputf("%s100Base-FX",(c++)?", ":""); + outputf(" 100Base-FX"); linktype = 0x0005; } if (mopt & 0x10) { - outputf("%s10Base-2",(c++)?", ":""); + outputf(" 10Base-2"); linktype = 0x0003; } if (mopt & 0x20) { - outputf("%sAUI",(c++)?", ":""); + outputf(" AUI"); linktype = 0x0001; } if (mopt & 0x40) { - outputf("%sMII",(c++)?", ":""); + outputf(" MII"); linktype = 0x0006; } if ((mopt & 0xA) == 0xA) { - outputf("%s10Base-T / 100Base-TX",(c++)?", ":""); + outputf(" 10Base-T / 100Base-TX"); linktype = 0x0008; } else if ((mopt & 0xA) == 0x2) { - outputf("%s100Base-TX",(c++)?", ":""); + outputf(" 100Base-TX"); linktype = 0x0008; } else if ((mopt & 0xA) == 0x8) { - outputf("%s10Base-T",(c++)?", ":""); + outputf(" 10Base-T"); linktype = 0x0008; } - outputf("."); /** Determine transceiver type to use, depending on value stored in ** eeprom 0x16 @@ -925,7 +910,9 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) /** Set the RX filter = receive only individual pkts & multicast & bcast. **/ _issue_command(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04); _issue_command(INF_3C90X.IOAddr, cmdRxEnable, 0); - + + /* Now stick a packet in the queue. */ + _setup_recv(&nic); /** ** set Indication and Interrupt flags , acknowledge any IRQ's @@ -935,8 +922,9 @@ static int a3c90x_probe(struct pci_dev * pci, void * data) _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661); /* * Set our exported functions **/ - nic.poll = a3c90x_poll; - nic.transmit = a3c90x_transmit; + nic.recv = _recv; + nic.transmit = _transmit; + memcpy(nic.hwaddr, INF_3C90X.HWAddr, 6); eth_register(&nic); return 1;