X-Git-Url: http://git.joshuawise.com/netwatch.git/blobdiff_plain/057f0bb976a93bfa290b20a2192837e324573d9b..73d65ee64db897452946c14e2b911b4c1f106b26:/net/3c90x.c?ds=inline

diff --git a/net/3c90x.c b/net/3c90x.c
index a1b319c..6d4eea0 100644
--- a/net/3c90x.c
+++ b/net/3c90x.c
@@ -218,28 +218,24 @@ enum Commands
 #define INT_CMDINPROGRESS	(1<<12)
 #define INT_WINDOWNUMBER	(7<<13)
 
-
-/*** TX descriptor ***/
-typedef struct
-    {
-    unsigned int	DnNextPtr;
-    unsigned int	FrameStartHeader;
-    struct {
-      unsigned int addr;
-      unsigned int len;
-    } __attribute ((aligned(8))) segments[64];
-    }
-    TXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */
+/* These structures are all 64-bit aligned, as needed for bus-mastering I/O. */
+typedef struct {
+	unsigned int addr;
+	unsigned int len;
+} segment_t __attribute__ ((aligned(8)));
+
+typedef struct {
+	unsigned int next;
+	unsigned int hdr;
+	segment_t segments[64 /* XXX magic */];
+} txdesc_t __attribute__ ((aligned(8)));
 
 /*** RX descriptor ***/
-typedef struct
-    {
-    unsigned int	UpNextPtr;
-    unsigned int	UpPktStatus;
-    unsigned int	DataAddr;
-    unsigned int	DataLength;
-    }
-    RXD __attribute__ ((aligned(8))); /* 64-bit aligned for bus mastering */
+typedef struct {
+	unsigned int	next;
+	unsigned int	status;
+	segment_t segments[64];
+} rxdesc_t __attribute__ ((aligned(8)));
 
 /*** Global variables ***/
 static struct
@@ -249,10 +245,9 @@ static struct
     unsigned char	CurrentWindow;
     unsigned int	IOAddr;
     unsigned char	HWAddr[ETH_ALEN];
-    TXD			TransmitDPD;
-    RXD			ReceiveUPD;
     }
     INF_3C90X;
+
 static struct nic nic;
 
 #define _outl(v,a) outl((a),(v))
@@ -407,13 +402,6 @@ a3c90x_internal_WriteEeprom(int ioaddr, int address, unsigned short value)
  ***/
 static void a3c90x_reset(void)
     {
-#ifdef	CFG_3C90X_PRESERVE_XCVR
-    int cfg;
-    /** Read the current InternalConfig value. **/
-    _set_window(INF_3C90X.IOAddr, winTxRxOptions3);
-    cfg = inl(INF_3C90X.IOAddr + regInternalConfig_3_l);
-#endif
-
     /** Send the reset command to the card **/
     outputf("3c90x: issuing RESET");
     _issue_command(INF_3C90X.IOAddr, cmdGlobalReset, 0);
@@ -426,18 +414,6 @@ static void a3c90x_reset(void)
     _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2);
     _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4);
 
-#ifdef	CFG_3C90X_PRESERVE_XCVR
-    /** Re-set the original InternalConfig value from before reset **/
-    _set_window(INF_3C90X.IOAddr, winTxRxOptions3);
-    _outl(cfg, INF_3C90X.IOAddr + regInternalConfig_3_l);
-
-    /** enable DC converter for 10-Base-T **/
-    if ((cfg&0x0300) == 0x0300)
-	{
-	_issue_command(INF_3C90X.IOAddr, cmdEnableDcConverter, 0);
-	}
-#endif
-
     /** Issue transmit reset, wait for command completion **/
     _issue_command(INF_3C90X.IOAddr, cmdTxReset, 0);
     if (! INF_3C90X.isBrev)
@@ -465,69 +441,104 @@ static void a3c90x_reset(void)
     return;
     }
 
+/***************************** Transmit routines *****************************/
 
+#define XMIT_BUFS 8
 
-/*** a3c90x_transmit: exported function that transmits a packet.  Does not
- *** return any particular status.  Parameters are:
- *** dest_addr[6] - destination address, ethernet;
- *** proto - protocol type (ARP, IP, etc);
- *** size - size of the non-header part of the packet that needs transmitted;
- *** pkt - the pointer to the packet data itself.
- ***/
-static void
-a3c90x_transmit(struct pbuf *p)
+static txdesc_t txdescs[XMIT_BUFS];
+static struct pbuf *txpbufs[XMIT_BUFS] = {0,};
+
+/* txcons is the index into the ring buffer of the last packet that the
+ * 3c90x was seen processing, or -1 if the 3c90x was idle.
+ */
+static int txcons = -1;
+
+/* txprod is the index of the _next_ buffer that the driver will write into. */
+static int txprod = 0;
+
+/* _transmit adds a packet to the transmit ring buffer.  If no space is
+ * available in the buffer, then _transmit blocks until a packet has been
+ * transmitted.
+ */
+static void _transmit(struct pbuf *p)
 {
 	unsigned char status;
-	static struct pbuf *oldpbuf = NULL;
-	unsigned int n, len;
+	int len, n;
 	
-	if (oldpbuf)
+	/* Wait for there to be space. */
+	if (txcons == txprod)
 	{
-		while (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE) && oneshot_running())
-			;
-		if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w) & INT_TXCOMPLETE))
+		int i = 0;
+		
+		outputf("3c90x: txbuf full, waiting for space...");
+		while (inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0)
+			i++;
+		outputf("3c90x: took %d iters", i);
+	}
+	
+	/* Stall the download engine so it doesn't bother us. */
+	_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 2 /* Stall download */);
+	
+	/* Clean up old txcons. */
+	if (txcons != -1)
+	{
+		unsigned long curp = inl(INF_3C90X.IOAddr + regDnListPtr_l);
+		int end;
+		
+		if (curp == 0)
+			end = txprod;
+		else
+			end = (curp - v2p(txdescs)) / sizeof(txdescs[0]);
+		
+		while (txcons != end)
 		{
-			outputf("3c90x: tx timeout? txstat %02x", inb(INF_3C90X.IOAddr + regTxStatus_b));
-			outputf("3c90x: Gen sts %04x", inw(INF_3C90X.IOAddr + regCommandIntStatus_w));
+			pbuf_free(txpbufs[txcons]);
+			txpbufs[txcons] = NULL;
+			txdescs[txcons].hdr = 0;
+			txdescs[txcons].next = 0;
+			txcons = (txcons + 1) % XMIT_BUFS;
 		}
-		status = inb(INF_3C90X.IOAddr + regTxStatus_b);
+		if (txcons == txprod)
+			txcons = -1;
+	}
+	
+	/* Look at the TX status */
+	status = inb(INF_3C90X.IOAddr + regTxStatus_b);
+	if (status)
+	{
+		outputf("3c90x: error: the nus.");
 		outb(INF_3C90X.IOAddr + regTxStatus_b, 0x00);
-		pbuf_free(oldpbuf);
-		oldpbuf = NULL;
 	}
 
-	_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 2 /* Stall download */);
-
-	/** Setup the DPD (download descriptor) **/
-	INF_3C90X.TransmitDPD.DnNextPtr = 0;
+	/* Set up the new txdesc. */
+	txdescs[txprod].next = 0;
 	len = 0;
 	n = 0;
-	oldpbuf = p;
+	txpbufs[txprod] = p;
 	for (; p; p = p->next)
 	{
-		INF_3C90X.TransmitDPD.segments[n].addr = v2p(p->payload);
-		INF_3C90X.TransmitDPD.segments[n].len = p->len | (p->next ? 0 : (1 << 31));
+		txdescs[txprod].segments[n].addr = v2p(p->payload);
+		txdescs[txprod].segments[n].len = p->len | (p->next ? 0 : (1 << 31));
 		len += p->len;
 		pbuf_ref(p);
 		n++;
 	}
-	/** set notification for transmission completion (bit 15) **/
-	INF_3C90X.TransmitDPD.FrameStartHeader = (len) | 0x8000;
+	txdescs[txprod].hdr = len;	/* If we wanted completion notification, bit 15 */
 	
-	outputf("3c90x: Sending %d byte %d seg packet", len, n);
-
-	/** Send the packet **/
-	outl(INF_3C90X.IOAddr + regDnListPtr_l, v2p(&(INF_3C90X.TransmitDPD)));
-	_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */);
-		
-	oneshot_start_ms(10);
-	while((inl(INF_3C90X.IOAddr + regDnListPtr_l) != 0) && oneshot_running())
-		;
-	if (!oneshot_running())
+	/* Now link the new one in, after it's been set up. */
+	txdescs[(txprod + XMIT_BUFS - 1) % XMIT_BUFS].next = v2p(&(txdescs[txprod]));
+	
+	/* If the card is stopped, start it up again. */
+	if (inl(INF_3C90X.IOAddr + regDnListPtr_l) == 0)
 	{
-		outputf("3c90x: Download engine pointer timeout");
-		return;
+		outl(INF_3C90X.IOAddr + regDnListPtr_l, v2p(&(txdescs[txprod])));
+		txcons = txprod;
 	}
+	
+	txprod = (txprod + 1) % XMIT_BUFS;
+	
+	/* And let it proceed on its way. */
+	_issue_command(INF_3C90X.IOAddr, cmdStallCtl, 3 /* Unstall download */);
 
 #if 0		
 	/** successful completion (sans "interrupt Requested" bit) **/
@@ -563,70 +574,121 @@ a3c90x_transmit(struct pbuf *p)
 #endif
 }
 
+/***************************** Receive routines *****************************/
+#define MAX_RECV_SIZE 1536
+#define RECV_BUFS 16
 
+static rxdesc_t rxdescs[RECV_BUFS];
+static struct pbuf *rxpbufs[RECV_BUFS] = {0,};
 
-/*** a3c90x_poll: exported routine that waits for a certain length of time
- *** for a packet, and if it sees none, returns 0.  This routine should
- *** copy the packet to nic->packet if it gets a packet and set the size
- *** in nic->packetlen.  Return 1 if a packet was found.
- ***/
-static int
-a3c90x_poll(struct nic *nic, int retrieve)
-    {
-    int i, errcode;
-
-    if (!(inw(INF_3C90X.IOAddr + regCommandIntStatus_w)&0x0010))
-	{
-	return 0;
-	}
-
-    if ( ! retrieve ) return 1;
-
-    /** we don't need to acknowledge rxComplete -- the upload engine
-     ** does it for us.
-     **/
-
-    /** Build the up-load descriptor **/
-    INF_3C90X.ReceiveUPD.UpNextPtr = 0;
-    INF_3C90X.ReceiveUPD.UpPktStatus = 0;
-    INF_3C90X.ReceiveUPD.DataAddr = v2p(nic->packet);
-    INF_3C90X.ReceiveUPD.DataLength = 1536 + (1<<31);
+/* rxcons is the pointer to the receive descriptor that the ethernet card will
+ * write into next.
+ */
+static int rxcons = 0;
 
-    /** Submit the upload descriptor to the NIC **/
-    _outl(v2p(&(INF_3C90X.ReceiveUPD)),
-         INF_3C90X.IOAddr + regUpListPtr_l);
+/* rxprod is the pointer to the receive descriptor that the driver will
+ * allocate next.
+ */
+static int rxprod = 0;
 
-    /** Wait for upload completion (upComplete(15) or upError (14)) **/
-    for(i=0;i<40000;i++);
-    while((INF_3C90X.ReceiveUPD.UpPktStatus & ((1<<14) | (1<<15))) == 0)
-	for(i=0;i<40000;i++);
+/* _recv_prepare fills the 3c90x's ring buffer with fresh pbufs from lwIP.
+ * The upload engine need not be stalled.
+ */
+static void _recv_prepare(struct nic *nic)
+{
+	int oldprod;
 
-    /** Check for Error (else we have good packet) **/
-    if (INF_3C90X.ReceiveUPD.UpPktStatus & (1<<14))
+	oldprod = rxprod;
+	while ((rxprod != rxcons) || !rxpbufs[rxprod])
 	{
-	errcode = INF_3C90X.ReceiveUPD.UpPktStatus;
-	if (errcode & (1<<16))
-	    outputf("3C90X: Rx Overrun (%hX)",errcode>>16);
-	else if (errcode & (1<<17))
-	    outputf("3C90X: Runt Frame (%hX)",errcode>>16);
-	else if (errcode & (1<<18))
-	    outputf("3C90X: Alignment Error (%hX)",errcode>>16);
-	else if (errcode & (1<<19))
-	    outputf("3C90X: CRC Error (%hX)",errcode>>16);
-	else if (errcode & (1<<20))
-	    outputf("3C90X: Oversized Frame (%hX)",errcode>>16);
-	else
-	    outputf("3C90X: Packet error (%hX)",errcode>>16);
-	return 0;
+		int i;
+		struct pbuf *p;
+		
+		if (!rxpbufs[rxprod])
+			rxpbufs[rxprod] = p = pbuf_alloc(PBUF_RAW, MAX_RECV_SIZE, PBUF_POOL);
+		else {
+			outputf("WARNING: 3c90x has pbuf in slot %d", rxprod);
+			p = rxpbufs[rxprod];
+		}
+		
+		if (!p)
+		{
+			outputf("3c90x: out of memory for rx pbuf?");
+			break;
+		}
+		
+		rxdescs[rxprod].status = 0;
+		rxdescs[rxprod].next = 0;
+		for (i = 0; p; p = p->next, i++)
+		{
+			rxdescs[rxprod].segments[i].addr = v2p(p->payload);
+			rxdescs[rxprod].segments[i].len = p->len | (p->next ? 0 : (1 << 31));
+		}
+		
+		/* Hook in the new one after and only after it's been fully set up. */
+		rxdescs[(rxprod + RECV_BUFS - 1) % RECV_BUFS].next = v2p(&(rxdescs[rxprod]));
+		rxprod = (rxprod + 1) % RECV_BUFS;
 	}
+	
+	if (inl(INF_3C90X.IOAddr + regUpListPtr_l) == 0 && rxpbufs[oldprod])	/* Ran out of shit, and got new shit? */
+	{
+		outl(INF_3C90X.IOAddr + regUpListPtr_l, v2p(&rxdescs[oldprod]));
+		outputf("3c90x: WARNING: Ran out of rx slots");
+	}
+	
+}
 
-    /** Ok, got packet.  Set length in nic->packetlen. **/
-    nic->packetlen = (INF_3C90X.ReceiveUPD.UpPktStatus & 0x1FFF);
-
-    return 1;
-    }
-
+/* _recv polls the ring buffer to see if any packets are available.  If any 
+ * are, then eth_recv is called for each available.  _recv returns how many
+ * packets it received successfully.  Whether _recv got any packets or not,
+ * _recv does not block, and reinitializes the ring buffer with fresh pbufs.
+ */
+static int _recv(struct nic *nic)
+{
+	int errcode, n = 0;
+	struct pbuf *p;
+	
+	/* Nothing to do? */
+	while ((rxdescs[rxcons].status & ((1<<14) | (1<<15))) != 0)
+	{
+		/** Check for Error (else we have good packet) **/
+		if (rxdescs[rxcons].status & (1<<14))
+		{
+			errcode = rxdescs[rxcons].status;
+			if (errcode & (1<<16))
+				outputf("3C90X: Rx Overrun (%hX)",errcode>>16);
+			else if (errcode & (1<<17))
+				outputf("3C90X: Runt Frame (%hX)",errcode>>16);
+			else if (errcode & (1<<18))
+				outputf("3C90X: Alignment Error (%hX)",errcode>>16);
+			else if (errcode & (1<<19))
+				outputf("3C90X: CRC Error (%hX)",errcode>>16);
+			else if (errcode & (1<<20))
+				outputf("3C90X: Oversized Frame (%hX)",errcode>>16);
+			else
+				outputf("3C90X: Packet error (%hX)",errcode>>16);
+		
+			p = NULL;	
+			pbuf_free(rxpbufs[rxcons]);		/* Bounce the old one before setting it up again. */
+		} else {
+			p = rxpbufs[rxcons];
+			pbuf_realloc(p, rxdescs[rxcons].status & 0x1FFF);	/* Resize the packet to how large it actually is. */
+		}
+		
+		rxpbufs[rxcons] = NULL;
+		rxdescs[rxcons].status = 0; 
+		rxcons = (rxcons + 1) % RECV_BUFS;
+		
+		if (p)
+		{
+			eth_recv(nic, p);
+			n++;
+		}
+	}
 
+	_recv_prepare(nic);	/* Light the NIC up again. */
+	return n;
+}
 
 /*** a3c90x_disable: exported routine to disable the card.  What's this for?
  *** the eepro100.c driver didn't have one, so I just left this one empty too.
@@ -794,12 +856,6 @@ static int a3c90x_probe(struct pci_dev * pci, void * data)
     _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+2);
     _outw(0, INF_3C90X.IOAddr + regStationMask_2_3w+4);
 
-    /** Fill in our entry in the etherboot arp table **/
-/* XXX ? for lwip? 
-    for(i=0;i<ETH_ALEN;i++)
-	nic.node_addr[i] = (eeprom[HWADDR_OFFSET + i/2] >> (8*((i&1)^1))) & 0xff;
-*/
-
     /** Read the media options register, print a message and set default
      ** xcvr.
      **
@@ -820,45 +876,44 @@ static int a3c90x_probe(struct pci_dev * pci, void * data)
     linktype = 0x0008;
     if (mopt & 0x01)
 	{
-	outputf("%s100Base-T4",(c++)?", ":"");
+	outputf("  100Base-T4");
 	linktype = 0x0006;
 	}
     if (mopt & 0x04)
 	{
-	outputf("%s100Base-FX",(c++)?", ":"");
+	outputf("  100Base-FX");
 	linktype = 0x0005;
 	}
     if (mopt & 0x10)
 	{
-	outputf("%s10Base-2",(c++)?", ":"");
+	outputf("  10Base-2");
 	linktype = 0x0003;
 	}
     if (mopt & 0x20)
 	{
-	outputf("%sAUI",(c++)?", ":"");
+	outputf("  AUI");
 	linktype = 0x0001;
 	}
     if (mopt & 0x40)
 	{
-	outputf("%sMII",(c++)?", ":"");
+	outputf("  MII");
 	linktype = 0x0006;
 	}
     if ((mopt & 0xA) == 0xA)
 	{
-	outputf("%s10Base-T / 100Base-TX",(c++)?", ":"");
+	outputf("  10Base-T / 100Base-TX");
 	linktype = 0x0008;
 	}
     else if ((mopt & 0xA) == 0x2)
 	{
-	outputf("%s100Base-TX",(c++)?", ":"");
+	outputf("  100Base-TX");
 	linktype = 0x0008;
 	}
     else if ((mopt & 0xA) == 0x8)
 	{
-	outputf("%s10Base-T",(c++)?", ":"");
+	outputf("  10Base-T");
 	linktype = 0x0008;
 	}
-    outputf(".");
 
     /** Determine transceiver type to use, depending on value stored in
      ** eeprom 0x16
@@ -919,9 +974,13 @@ static int a3c90x_probe(struct pci_dev * pci, void * data)
 
     /** Set the RX filter = receive only individual pkts & multicast & bcast. **/
     _issue_command(INF_3C90X.IOAddr, cmdSetRxFilter, 0x01 + 0x02 + 0x04);
+    
+    /* Stick some packets in the queue. */
+    _recv_prepare(&nic);
+    
+    /* And light up the RX engine. */
     _issue_command(INF_3C90X.IOAddr, cmdRxEnable, 0);
 
-
     /**
      ** set Indication and Interrupt flags , acknowledge any IRQ's
      **/
@@ -930,8 +989,8 @@ static int a3c90x_probe(struct pci_dev * pci, void * data)
     _issue_command(INF_3C90X.IOAddr, cmdAcknowledgeInterrupt, 0x661);
 
     /* * Set our exported functions **/
-    nic.poll     = a3c90x_poll;
-    nic.transmit = a3c90x_transmit;
+    nic.recv     = _recv;
+    nic.transmit = _transmit;
     memcpy(nic.hwaddr, INF_3C90X.HWAddr, 6);
     eth_register(&nic);