From: Joshua Wise Date: Tue, 18 Mar 2008 05:04:26 +0000 (-0400) Subject: Use a single DCM unit. X-Git-Tag: PRE_ROLLBACK~11 X-Git-Url: http://git.joshuawise.com/mandelfpga.git/commitdiff_plain/265061f2b080c0ea2b18d0a1f7b92de658a5ad92 Use a single DCM unit. --- diff --git a/Main.v b/Main.v index 11d7833..ad8e90c 100644 --- a/Main.v +++ b/Main.v @@ -266,14 +266,12 @@ module Mandelbrot( reg statekick = 0; // State needs to be kicked back to 3'b010 on the next mclk. // This is guaranteed to converge after two pixclks. - //always @(negedge mclk) - // if (pixclk && !typethea) begin - // typethea <= 1; - // statekick <= 1; - // end else if (typethea) begin // This is the edge of the falling anus. - // typethea <= 0; - // statekick <= 0; - // end + always @(negedge mclk) + if (pixclk && !statekick) begin + statekick <= 1; + end else if (statekick) begin // This is the edge of the falling anus. + statekick <= 0; + end always @(posedge mclk) begin @@ -391,21 +389,28 @@ module MandelTop( wire pixclk, mclk, gclk2, clk; wire dcm1ok, dcm2ok; - assign dcmok = dcm1ok && dcm2ok; + //assign dcmok = dcm1ok && dcm2ok; + + //IBUFG typeA(.O(clk), .I(gclk)); - IBUFG typeA(.O(clk), .I(gclk)); + //pixDCM dcm( // CLKIN is 50MHz xtal, CLKFX_OUT is 25MHz + // .CLKIN_IN(clk), + // .CLKFX_OUT(pixclk), + // .LOCKED_OUT(dcm1ok) + // ); - pixDCM dcm( // CLKIN is 50MHz xtal, CLKFX_OUT is 25MHz - .CLKIN_IN(clk), - .CLKFX_OUT(pixclk), - .LOCKED_OUT(dcm1ok) - ); + //mandelDCM dcm2( + // .CLKIN_IN(clk), + // .CLKFX_OUT(mclk), + // .LOCKED_OUT(dcm2ok) + // ); - mandelDCM dcm2( - .CLKIN_IN(clk), - .CLKFX_OUT(mclk), - .LOCKED_OUT(dcm2ok) - ); + mainDCM dcm ( + .U1_CLKIN_IN(gclk), + .U1_CLKDV_OUT(pixclk), + .U2_CLKFX_OUT(mclk), + .U2_LOCKED_OUT(dcmok) + ); wire border; wire [11:0] x, y;