X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/ff7fd7f2e78ed70833e58cecc316d5c8d6603349..2854e3991ab66f6fb954aba96caf7875d049431e:/System.v?ds=inline diff --git a/System.v b/System.v index 033e4b1..1872e51 100644 --- a/System.v +++ b/System.v @@ -6,13 +6,53 @@ module ROM( input clk, input wr, rd); - reg [7:0] rom [2047:0]; + reg [7:0] odata; + + // synthesis attribute ram_style of rom is block + reg [7:0] rom [1023:0]; initial $readmemh("rom.hex", rom); wire decode = address[15:13] == 0; - wire [7:0] odata = rom[address[11:0]]; + always @(posedge clk) + odata <= rom[address[10:0]]; + assign data = (rd && decode) ? odata : 8'bzzzzzzzz; +endmodule + +module BootstrapROM( + input [15:0] address, + inout [7:0] data, + input clk, + input wr, rd); + + reg [7:0] brom [255:0]; + initial $readmemh("bootstrap.hex", brom); + + wire decode = address[15:8] == 0; + wire [7:0] odata = brom[address[7:0]]; + assign data = (rd && decode) ? odata : 8'bzzzzzzzz; +endmodule + +module MiniRAM( + input [15:0] address, + inout [7:0] data, + input clk, + input wr, rd); + + reg [7:0] ram [127:0]; + + wire decode = (address >= 16'hFF80) && (address <= 16'hFFFE); + reg [7:0] odata; assign data = (rd && decode) ? odata : 8'bzzzzzzzz; - //assign data = rd ? odata : 8'bzzzzzzzz; + + always @(posedge clk) + begin + if (decode) // This has to go this way. The only way XST knows how to do + begin // block ram is chip select, write enable, and always + if (wr) // reading. "else if rd" does not cut it ... + ram[address[6:0]] <= data; + odata <= ram[address[6:0]]; + end + end endmodule module InternalRAM( @@ -21,19 +61,21 @@ module InternalRAM( input clk, input wr, rd); + // synthesis attribute ram_style of ram is block reg [7:0] ram [8191:0]; - wire decode = ({0,address} >= 17'hC000) && ({0,address} < 17'hFE00); + wire decode = address[15:13] == 3'b110; reg [7:0] odata; - wire idata = data; assign data = (rd && decode) ? odata : 8'bzzzzzzzz; - always @(negedge clk) + always @(posedge clk) begin - if (decode && rd) + if (decode) // This has to go this way. The only way XST knows how to do + begin // block ram is chip select, write enable, and always + if (wr) // reading. "else if rd" does not cut it ... + ram[address[12:0]] <= data; odata <= ram[address[12:0]]; - else if (decode && wr) - ram[address[12:0]] <= data; + end end endmodule @@ -43,13 +85,13 @@ module Switches( input clk, input wr, rd, input [7:0] switches, - output reg [7:0] ledout); + output reg [7:0] ledout = 0); wire decode = address == 16'hFF51; reg [7:0] odata; assign data = (rd && decode) ? odata : 8'bzzzzzzzz; - always @(negedge clk) + always @(posedge clk) begin if (decode && rd) odata <= switches; @@ -58,119 +100,193 @@ module Switches( end endmodule +`ifdef isim +module Dumpable(input [2:0] r, g, input [1:0] b, input hs, vs, vgaclk); +endmodule +`endif + module CoreTop( +`ifdef isim + output reg vgaclk = 0, + output reg clk = 0, +`else input xtal, input [7:0] switches, input [3:0] buttons, output wire [7:0] leds, output serio, output wire [3:0] digits, - output wire [7:0] seven); + output wire [7:0] seven, +`endif + output wire hs, vs, + output wire [2:0] r, g, + output wire [1:0] b, + output wire soundl, soundr); + +`ifdef isim + always #62 clk <= ~clk; + always #100 vgaclk <= ~vgaclk; - wire clk; - //IBUFG ibuf (.O(clk), .I(iclk)); + Dumpable dump(r,g,b,hs,vs,vgaclk); - CPUDCM dcm (.CLKIN_IN(xtal), .CLKFX_OUT(clk)); - - wire [15:0] addr; - wire [7:0] data; - wire wr, rd; + wire [7:0] leds; + wire serio; + wire [3:0] digits; + wire [7:0] seven; + wire [7:0] switches = 8'b0; + wire [3:0] buttons = 4'b0; +`else + wire xtalb, clk, vgaclk; + IBUFG iclkbuf(.O(xtalb), .I(xtal)); + CPUDCM dcm (.CLKIN_IN(xtalb), .CLKFX_OUT(clk)); + pixDCM pixdcm (.CLKIN_IN(xtalb), .CLKFX_OUT(vgaclk)); +`endif + wire [15:0] addr [1:0]; + wire [7:0] data [1:0]; + wire wr [1:0], rd [1:0]; + + wire irq, tmrirq, lcdcirq, vblankirq; + wire [7:0] jaddr; + wire [1:0] state; + GBZ80Core core( .clk(clk), - .busaddress(addr), - .busdata(data), - .buswr(wr), - .busrd(rd)); + .bus0address(addr[0]), + .bus0data(data[0]), + .bus0wr(wr[0]), + .bus0rd(rd[0]), + .bus1address(addr[1]), + .bus1data(data[1]), + .bus1wr(wr[1]), + .bus1rd(rd[1]), + .irq(irq), + .jaddr(jaddr), + .state(state)); + + BootstrapROM brom( + .address(addr[1]), + .data(data[1]), + .clk(clk), + .wr(wr[1]), + .rd(rd[1])); ROM rom( - .address(addr), - .data(data), + .address(addr[0]), + .data(data[0]), .clk(clk), - .wr(wr), - .rd(rd)); + .wr(wr[0]), + .rd(rd[0])); + + wire lcdhs, lcdvs, lcdclk; + wire [2:0] lcdr, lcdg; + wire [1:0] lcdb; + + LCDC lcdc( + .clk(clk), + .addr(addr[0]), + .data(data[0]), + .wr(wr[0]), + .rd(rd[0]), + .lcdcirq(lcdcirq), + .vblankirq(vblankirq), + .lcdclk(lcdclk), + .lcdhs(lcdhs), + .lcdvs(lcdvs), + .lcdr(lcdr), + .lcdg(lcdg), + .lcdb(lcdb)); + + Framebuffer fb( + .lcdclk(lcdclk), + .lcdhs(lcdhs), + .lcdvs(lcdvs), + .lcdr(lcdr), + .lcdg(lcdg), + .lcdb(lcdb), + .vgaclk(vgaclk), + .vgahs(hs), + .vgavs(vs), + .vgar(r), + .vgag(g), + .vgab(b)); AddrMon amon( - .addr(addr), - .clk(clk), - .digit(digits), - .out(seven), - .freeze(buttons[0]) - ); + .clk(clk), + .addr(addr[0]), + .digit(digits), + .out(seven), + .freeze(buttons[0]), + .periods( + (state == 2'b00) ? 4'b0010 : + (state == 2'b01) ? 4'b0001 : + (state == 2'b10) ? 4'b1000 : + 4'b0100) ); Switches sw( - .address(addr), - .data(data), .clk(clk), - .wr(wr), - .rd(rd), + .address(addr[0]), + .data(data[0]), + .wr(wr[0]), + .rd(rd[0]), .ledout(leds), .switches(switches) ); - UART nouart ( - .clk(clk), - .wr(wr), - .rd(rd), - .addr(addr), - .data(data), - .serial(serio) - ); - - InternalRAM ram( - .address(addr), - .data(data), + UART nouart ( /* no u */ .clk(clk), - .wr(wr), - .rd(rd)); -endmodule + .addr(addr[0]), + .data(data[0]), + .wr(wr[0]), + .rd(rd[0]), + .serial(serio) + ); -module TestBench(); - reg clk = 0; - wire [15:0] addr; - wire [7:0] data; - wire wr, rd; - -// wire [7:0] leds; -// wire [7:0] switches; - - always #10 clk <= ~clk; - GBZ80Core core( - .clk(clk), - .busaddress(addr), - .busdata(data), - .buswr(wr), - .busrd(rd)); - - ROM rom( + InternalRAM ram( .clk(clk), - .address(addr), - .data(data), - .wr(wr), - .rd(rd)); + .address(addr[0]), + .data(data[0]), + .wr(wr[0]), + .rd(rd[0]) + ); - InternalRAM ram( - .address(addr), - .data(data), + MiniRAM mram( .clk(clk), - .wr(wr), - .rd(rd)); + .address(addr[1]), + .data(data[1]), + .wr(wr[1]), + .rd(rd[1]) + ); - wire serio; - UART uart( - .addr(addr), - .data(data), + Timer tmr( .clk(clk), - .wr(wr), - .rd(rd), - .serial(serio)); - -// Switches sw( -// .clk(clk), -// .address(addr), -// .data(data), -// .wr(wr), -// .rd(rd), -// .switches(switches), -// .leds(leds)); + .addr(addr[0]), + .data(data[0]), + .wr(wr[0]), + .rd(rd[0]), + .irq(tmrirq) + ); + + Interrupt intr( + .clk(clk), + .addr(addr[0]), + .data(data[0]), + .wr(wr[0]), + .rd(rd[0]), + .vblank(vblankirq), + .lcdc(lcdcirq), + .tovf(tmrirq), + .serial(1'b0), + .buttons(1'b0), + .master(irq), + .jaddr(jaddr)); + + Soundcore sound( + .core_clk(clk), + .addr(addr[0]), + .data(data[0]), + .rd(rd[0]), + .wr(wr[0]), + .snd_data_l(soundl), + .snd_data_r(soundr)); endmodule