X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/eb0f2fe1637a4c6b4532ae08ff7b0af3bf39aef0..f327eee1f228769c4753a3f2279063c99f6f1ab0:/System.v?ds=inline

diff --git a/System.v b/System.v
index 0afc090..e0baebe 100644
--- a/System.v
+++ b/System.v
@@ -1,18 +1,170 @@
 
 `timescale 1ns / 1ps
-module ROM(
+module SimROM(
 	input [15:0] address,
 	inout [7:0] data,
 	input clk,
 	input wr, rd);
 
-	reg [7:0] rom [2047:0];
+	reg rdlatch = 0;
+	reg [7:0] odata;
+
+	reg [7:0] rom [32767:0];
 	initial $readmemh("rom.hex", rom);
 
 	wire decode = address[15:13] == 0;
-	wire [7:0] odata = rom[address[11:0]];
-	assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
-	//assign data = rd ? odata : 8'bzzzzzzzz;
+	always @(posedge clk) begin
+		rdlatch <= rd && decode;
+		odata <= rom[address[10:0]];
+	end
+	assign data = rdlatch ? odata : 8'bzzzzzzzz;
+endmodule
+
+module BootstrapROM(
+	input [15:0] address,
+	inout [7:0] data,
+	input clk,
+	input wr, rd);
+
+	reg rdlatch = 0;
+	reg [7:0] addrlatch = 0;
+	reg romno = 0, romnotmp = 0;
+	reg [7:0] brom0 [255:0];
+	reg [7:0] brom1 [255:0];
+	
+	initial $readmemh("fpgaboot.hex", brom0);
+	initial $readmemh("gbboot.hex", brom1);
+	
+`ifdef isim
+	initial romno <= 1;
+`endif
+
+	wire decode = address[15:8] == 0;
+	wire [7:0] odata = (romno == 0) ? brom0[addrlatch] : brom1[addrlatch];
+	always @(posedge clk) begin
+		rdlatch <= rd && decode;
+		addrlatch <= address[7:0];
+		if (wr && decode) romnotmp <= data[0];
+		if (rd && address == 16'h0000) romno <= romnotmp;	/* Latch when the program restarts. */
+	end
+	assign data = rdlatch ? odata : 8'bzzzzzzzz;
+endmodule
+
+module MiniRAM(
+	input [15:0] address,
+	inout [7:0] data,
+	input clk,
+	input wr, rd);
+	
+	reg [7:0] ram [127:0];
+	
+	wire decode = (address >= 16'hFF80) && (address <= 16'hFFFE);
+	reg rdlatch = 0;
+	reg [7:0] odata;
+	assign data = rdlatch ? odata : 8'bzzzzzzzz;
+	
+	always @(posedge clk)
+	begin
+		rdlatch <= rd && decode;
+		if (decode)		// This has to go this way. The only way XST knows how to do
+		begin			// block ram is chip select, write enable, and always
+			if (wr)		// reading. "else if rd" does not cut it ...
+				ram[address[6:0]] <= data;
+			odata <= ram[address[6:0]];
+		end
+	end
+endmodule
+
+module CellularRAM(
+	input clk,
+	input [15:0] address,
+	inout [7:0] data,
+	input wr, rd,
+	output wire cr_nADV, cr_nCE, cr_nOE, cr_nWE, cr_CRE, cr_nLB, cr_nUB, cr_CLK,
+	output wire st_nCE, st_nRST,
+	output wire [22:0] cr_A,
+	inout [15:0] cr_DQ);
+	
+	parameter ADDR_PROGADDRH = 16'hFF60;
+	parameter ADDR_PROGADDRM = 16'hFF61;
+	parameter ADDR_PROGADDRL = 16'hFF62;
+	parameter ADDR_PROGDATA = 16'hFF63;
+	parameter ADDR_PROGFLASH = 16'hFF65;
+	parameter ADDR_MBC = 16'hFF64;
+	
+	reg rdlatch = 0, wrlatch = 0;
+	reg [15:0] addrlatch = 0;
+	reg [7:0] datalatch = 0;
+	
+	reg [7:0] progaddrh, progaddrm, progaddrl;
+	
+	reg [22:0] progaddr;
+	
+	reg [7:0] mbc_emul = 8'b00000101;	// High bit is whether we're poking flash
+						// low 7 bits are the MBC that we are emulating
+	
+	assign cr_nADV = 0;	/* Addresses are always valid! :D */
+	assign cr_nCE = ~(addrlatch != ADDR_PROGFLASH);	/* The chip is enabled */
+	assign cr_nLB = 0;	/* Lower byte is enabled */
+	assign cr_nUB = 0;	/* Upper byte is enabled */
+	assign cr_CRE = 0;	/* Data writes, not config */
+	assign cr_CLK = 0;	/* Clock? I think not! */
+	
+	assign st_nRST = 1;	/* Keep the strataflash out of reset. */
+	assign st_nCE = ~(addrlatch == ADDR_PROGFLASH);
+	
+	wire decode = (addrlatch[15:14] == 2'b00) /* extrom */ || (addrlatch[15:13] == 3'b101) /* extram */ || (addrlatch == ADDR_PROGDATA) || (addrlatch == ADDR_PROGFLASH);
+	
+	reg [3:0] rambank = 0;
+	reg [8:0] rombank = 1;
+	
+	assign cr_nOE = decode ? ~rdlatch : 1;
+	assign cr_nWE = (decode && ((addrlatch == ADDR_PROGDATA) || (addrlatch == ADDR_PROGFLASH) || (mbc_emul[6:0] == 0) || (addrlatch[15:13] == 3'b101))) ? ~wrlatch : 1;
+	
+	assign cr_DQ = (~cr_nOE) ? 16'bzzzzzzzzzzzzzzzz : {8'b0, datalatch};
+	assign cr_A = (addrlatch[15:14] == 2'b00) ? /* extrom, home bank */ {9'b0,addrlatch[13:0]} :
+			(addrlatch[15:14] == 2'b01) ? /* extrom, paged bank */ {rombank, addrlatch[13:0]} :
+			(addrlatch[15:13] == 3'b101) ? /* extram */ {1'b1, 5'b0, rambank, addrlatch[12:0]} :
+			((addrlatch == ADDR_PROGDATA) || (addrlatch == ADDR_PROGFLASH)) ? progaddr :
+			23'b0;
+	
+	always @(posedge clk) begin
+		case (address)
+		ADDR_PROGADDRH: if (wr) progaddrh <= data;
+		ADDR_PROGADDRM: if (wr) progaddrm <= data;
+		ADDR_PROGADDRL: if (wr) progaddrl <= data;
+		ADDR_PROGDATA:	if (rd || wr) begin
+					progaddr <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]};
+					{progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} + 23'b1;
+				end
+		ADDR_MBC:	begin
+					mbc_emul <= data;
+					rambank <= 0;
+					rombank <= 1;
+				end
+		endcase
+		
+		if (mbc_emul[6:0] == 5) begin
+			if ((address[15:12] == 4'h2) && wr)
+				rombank <= {rombank[8], data};
+			else if ((address[15:12] == 4'h3) && wr)
+				rombank <= {data[0], rombank[7:0]};
+			else if ((address[15:12] == 4'h4) && wr)
+				rambank <= data[3:0];
+		end
+		
+		rdlatch <= rd;
+		wrlatch <= wr;
+		addrlatch <= address;
+		datalatch <= data;
+	end
+	
+	assign data = (rdlatch && decode) ?
+				(addrlatch == ADDR_PROGADDRH) ? progaddrh :
+				(addrlatch == ADDR_PROGADDRM) ? progaddrm :
+				(addrlatch == ADDR_PROGADDRL) ? progaddrl :
+				cr_DQ
+			: 8'bzzzzzzzz;
 endmodule
 
 module InternalRAM(
@@ -21,17 +173,19 @@ module InternalRAM(
 	input clk,
 	input wr, rd);
 	
-	// synthesis attribute ram_style of reg is block
+	// synthesis attribute ram_style of ram is block
 	reg [7:0] ram [8191:0];
 	
-	wire decode = address[15:13] == 3'b110;
+	wire decode = (address >= 16'hC000) && (address <= 16'hFDFF);	/* This includes echo RAM. */
 	reg [7:0] odata;
-	assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
+	reg rdlatch = 0;
+	assign data = rdlatch ? odata : 8'bzzzzzzzz;
 	
-	always @(negedge clk)
+	always @(posedge clk)
 	begin
-		if (decode)	// This has to go this way. The only way XST knows how to do
-		begin				// block ram is chip select, write enable, and always
+		rdlatch <= rd && decode;
+		if (decode)		// This has to go this way. The only way XST knows how to do
+		begin			// block ram is chip select, write enable, and always
 			if (wr)		// reading. "else if rd" does not cut it ...
 				ram[address[12:0]] <= data;
 			odata <= ram[address[12:0]];
@@ -49,10 +203,12 @@ module Switches(
 	
 	wire decode = address == 16'hFF51;
 	reg [7:0] odata;
-	assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
+	reg rdlatch = 0;
+	assign data = rdlatch ? odata : 8'bzzzzzzzz;
 	
-	always @(negedge clk)
+	always @(posedge clk)
 	begin
+		rdlatch <= rd && decode;
 		if (decode && rd)
 			odata <= switches;
 		else if (decode && wr)
@@ -60,172 +216,255 @@ module Switches(
 	end
 endmodule
 
+`ifdef isim
+module Dumpable(input [2:0] r, g, input [1:0] b, input hs, vs, vgaclk);
+endmodule
+`endif
+
 module CoreTop(
+`ifdef isim
+	output reg vgaclk = 0,
+	output reg clk = 0,
+`else
 	input xtal,
 	input [7:0] switches,
 	input [3:0] buttons,
 	output wire [7:0] leds,
 	output serio,
+	input serin,
 	output wire [3:0] digits,
-	output wire [7:0] seven);
+	output wire [7:0] seven,
+	output wire cr_nADV, cr_nCE, cr_nOE, cr_nWE, cr_CRE, cr_nLB, cr_nUB, cr_CLK, st_nCE, st_nRST,
+	output wire [22:0] cr_A,
+	inout [15:0] cr_DQ,
+	input ps2c, ps2d,
+`endif
+	output wire hs, vs,
+	output wire [2:0] r, g,
+	output wire [1:0] b,
+	output wire soundl, soundr);
+
+`ifdef isim
+	always #62 clk <= ~clk;
+	always #100 vgaclk <= ~vgaclk;
+	
+	Dumpable dump(r,g,b,hs,vs,vgaclk);
 	
-	wire clk;	
-	CPUDCM dcm (.CLKIN_IN(xtal), .CLKFX_OUT(clk));
+	wire [7:0] leds;
+	wire serio;
+	wire serin = 1;
+	wire [3:0] digits;
+	wire [7:0] seven;
+	wire [7:0] switches = 8'b0;
+	wire [3:0] buttons = 4'b0;
+`else	
+	wire xtalb, clk, vgaclk;
+	IBUFG iclkbuf(.O(xtalb), .I(xtal));
+	CPUDCM dcm (.CLKIN_IN(xtalb), .CLKFX_OUT(clk));
+	pixDCM pixdcm (.CLKIN_IN(xtalb), .CLKFX_OUT(vgaclk));
+	wire [7:0] ps2buttons;
+`endif
 
-	wire [15:0] addr;	
-	wire [7:0] data;
-	wire wr, rd;
+	wire [15:0] addr [1:0];
+	wire [7:0] data [1:0];
+	wire wr [1:0], rd [1:0];
 	
-	wire irq, tmrirq;
+	wire irq, tmrirq, lcdcirq, vblankirq, btnirq;
 	wire [7:0] jaddr;
-
+	wire [1:0] state;
+	wire ack;
+	
 	GBZ80Core core(
 		.clk(clk),
-		.busaddress(addr),
-		.busdata(data),
-		.buswr(wr),
-		.busrd(rd),
+		.bus0address(addr[0]),
+		.bus0data(data[0]),
+		.bus0wr(wr[0]),
+		.bus0rd(rd[0]),
+		.bus1address(addr[1]),
+		.bus1data(data[1]),
+		.bus1wr(wr[1]),
+		.bus1rd(rd[1]),
 		.irq(irq),
-		.jaddr(jaddr));
+		.irqack(ack),
+		.jaddr(jaddr),
+		.state(state));
 	
-	ROM rom(
-		.address(addr),
-		.data(data),
+	BootstrapROM brom(
+		.address(addr[1]),
+		.data(data[1]),
 		.clk(clk),
-		.wr(wr),
-		.rd(rd));
+		.wr(wr[1]),
+		.rd(rd[1]));
 	
-	AddrMon amon(
-		.addr(addr), 
-		.clk(clk), 
-		.digit(digits), 
-		.out(seven),
-		.freeze(buttons[0]));
-	 
+`ifdef isim
+	SimROM rom(
+		.address(addr[0]),
+		.data(data[0]),
+		.clk(clk),
+		.wr(wr[0]),
+		.rd(rd[0]));
+`else
+	CellularRAM cellram(
+		.address(addr[0]),
+		.data(data[0]),
+		.clk(clk),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.cr_nADV(cr_nADV),
+		.cr_nCE(cr_nCE),
+		.cr_nOE(cr_nOE),
+		.cr_nWE(cr_nWE),
+		.cr_CRE(cr_CRE),
+		.cr_nLB(cr_nLB),
+		.cr_nUB(cr_nUB),
+		.cr_CLK(cr_CLK),
+		.cr_A(cr_A),
+		.cr_DQ(cr_DQ),
+		.st_nCE(st_nCE),
+		.st_nRST(st_nRST));
+`endif
+	
+	wire lcdhs, lcdvs, lcdclk;
+	wire [2:0] lcdr, lcdg;
+	wire [1:0] lcdb;
+	
+	LCDC lcdc(
+		.clk(clk),
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.lcdcirq(lcdcirq),
+		.vblankirq(vblankirq),
+		.lcdclk(lcdclk),
+		.lcdhs(lcdhs),
+		.lcdvs(lcdvs),
+		.lcdr(lcdr),
+		.lcdg(lcdg),
+		.lcdb(lcdb));
+	
+	Framebuffer fb(
+		.lcdclk(lcdclk),
+		.lcdhs(lcdhs),
+		.lcdvs(lcdvs),
+		.lcdr(lcdr),
+		.lcdg(lcdg),
+		.lcdb(lcdb),
+		.vgaclk(vgaclk),
+		.vgahs(hs),
+		.vgavs(vs),
+		.vgar(r),
+		.vgag(g),
+		.vgab(b));
+
+	wire [7:0] sleds;
+`ifdef isim
+	assign leds = sleds;
+`else
+	assign leds = sleds | ps2buttons;
+`endif
 	Switches sw(
-		.address(addr),
-		.data(data),
 		.clk(clk),
-		.wr(wr),
-		.rd(rd),
-		.ledout(leds),
+		.address(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.ledout(sleds),
 		.switches(switches)
 		);
-
-	UART nouart (	/* no u */
-		.clk(clk), 
-		.wr(wr), 
-		.rd(rd), 
-		.addr(addr), 
-		.data(data), 
-		.serial(serio)
-		);
-
-	InternalRAM ram(
-		.address(addr),
-		.data(data),
+	
+`ifdef isim
+`else
+	PS2Button ps2(
 		.clk(clk),
-		.wr(wr),
-		.rd(rd)
+		.inclk(ps2c),
+		.indata(ps2d),
+		.buttons(ps2buttons)
+		);
+`endif
+	
+	Buttons ass(
+		.core_clk(clk),
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.int(btnirq),
+	`ifdef isim
+		.buttons(switches)
+	`else
+		.buttons(ps2buttons)
+	`endif
 		);
 
-	Timer tmr(
+	AddrMon amon(
+		.clk(clk), 
+		.addr(addr[0]),
+		.digit(digits), 
+		.out(seven),
+		.freeze(buttons[0]),
+		.periods(
+			(state == 2'b00) ? 4'b0010 :
+			(state == 2'b01) ? 4'b0001 :
+			(state == 2'b10) ? 4'b1000 :
+			                   4'b0100) );
+	 
+	UART nouart (	/* no u */
 		.clk(clk),
-		.wr(wr),
-		.rd(rd),
-		.addr(addr),
-		.data(data),
-		.irq(tmrirq)
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.serial(serio),
+		.serialrx(serin)
 		);
-	
-	Interrupt intr(
-		.clk(clk),
-		.rd(rd),
-		.wr(wr),
-		.addr(addr),
-		.data(data),
-		.vblank(0),
-		.lcdc(0),
-		.tovf(tmrirq),
-		.serial(0),
-		.buttons(0),
-		.master(irq),
-		.jaddr(jaddr));
-endmodule
 
-module TestBench();
-	reg clk = 1;
-	wire [15:0] addr;
-	wire [7:0] data;
-	wire wr, rd;
-	
-	wire irq, tmrirq;
-	wire [7:0] jaddr;
-	
-	wire [7:0] leds;
-	wire [7:0] switches;
-	
-	always #10 clk <= ~clk;
-	GBZ80Core core(
-		.clk(clk),
-		.busaddress(addr),
-		.busdata(data),
-		.buswr(wr),
-		.busrd(rd),
-		.irq(irq),
-		.jaddr(jaddr));
-	
-	ROM rom(
+	InternalRAM ram(
 		.clk(clk),
-		.address(addr),
-		.data(data),
-		.wr(wr),
-		.rd(rd));
+		.address(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0])
+		);
 	
-	InternalRAM ram(
-		.address(addr),
-		.data(data),
+	MiniRAM mram(
 		.clk(clk),
-		.wr(wr),
-		.rd(rd));
+		.address(addr[1]),
+		.data(data[1]),
+		.wr(wr[1]),
+		.rd(rd[1])
+		);
 
-	wire serio;
-	UART uart(
-		.addr(addr),
-		.data(data),
-		.clk(clk),
-		.wr(wr),
-		.rd(rd),
-		.serial(serio));
-	
 	Timer tmr(
 		.clk(clk),
-		.wr(wr),
-		.rd(rd),
-		.addr(addr),
-		.data(data),
-		.irq(tmrirq));
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.irq(tmrirq)
+		);
 	
 	Interrupt intr(
 		.clk(clk),
-		.rd(rd),
-		.wr(wr),
-		.addr(addr),
-		.data(data),
-		.vblank(0),
-		.lcdc(0),
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.vblank(vblankirq),
+		.lcdc(lcdcirq),
 		.tovf(tmrirq),
-		.serial(0),
-		.buttons(0),
+		.serial(1'b0),
+		.buttons(btnirq),
 		.master(irq),
+		.ack(ack),
 		.jaddr(jaddr));
 	
-	Switches sw(
-		.clk(clk),
-		.address(addr),
-		.data(data),
-		.wr(wr),
-		.rd(rd),
-		.switches(switches),
-		.ledout(leds));
+	Soundcore sound(
+		.core_clk(clk),
+		.addr(addr[0]),
+		.data(data[0]),
+		.rd(rd[0]),
+		.wr(wr[0]),
+		.snd_data_l(soundl),
+		.snd_data_r(soundr));
 endmodule