X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/d1b404569fd0bdc74a3397c4ef0a5c2e5f95c835..refs/heads/master:/System.v

diff --git a/System.v b/System.v
index 62f976b..ec62236 100644
--- a/System.v
+++ b/System.v
@@ -1,5 +1,5 @@
-
 `timescale 1ns / 1ps
+
 module SimROM(
 	input [15:0] address,
 	inout [7:0] data,
@@ -81,6 +81,7 @@ module CellularRAM(
 	inout [7:0] data,
 	input wr, rd,
 	output wire cr_nADV, cr_nCE, cr_nOE, cr_nWE, cr_CRE, cr_nLB, cr_nUB, cr_CLK,
+	output wire st_nCE, st_nRST,
 	output wire [22:0] cr_A,
 	inout [15:0] cr_DQ);
 	
@@ -88,6 +89,7 @@ module CellularRAM(
 	parameter ADDR_PROGADDRM = 16'hFF61;
 	parameter ADDR_PROGADDRL = 16'hFF62;
 	parameter ADDR_PROGDATA = 16'hFF63;
+	parameter ADDR_PROGFLASH = 16'hFF65;
 	parameter ADDR_MBC = 16'hFF64;
 	
 	reg rdlatch = 0, wrlatch = 0;
@@ -102,25 +104,28 @@ module CellularRAM(
 						// low 7 bits are the MBC that we are emulating
 	
 	assign cr_nADV = 0;	/* Addresses are always valid! :D */
-	assign cr_nCE = 0;	/* The chip is enabled */
+	assign cr_nCE = ~(addrlatch != ADDR_PROGFLASH);	/* The chip is enabled */
 	assign cr_nLB = 0;	/* Lower byte is enabled */
 	assign cr_nUB = 0;	/* Upper byte is enabled */
 	assign cr_CRE = 0;	/* Data writes, not config */
 	assign cr_CLK = 0;	/* Clock? I think not! */
 	
-	wire decode = (addrlatch[15:14] == 2'b00) /* extrom */ || (addrlatch[15:13] == 3'b101) /* extram */ || (addrlatch == ADDR_PROGDATA);
+	assign st_nRST = 1;	/* Keep the strataflash out of reset. */
+	assign st_nCE = ~(addrlatch == ADDR_PROGFLASH);
+	
+	wire decode = (addrlatch[15:14] == 2'b00) /* extrom */ || (addrlatch[15:13] == 3'b101) /* extram */ || (addrlatch == ADDR_PROGDATA) || (addrlatch == ADDR_PROGFLASH);
 	
 	reg [3:0] rambank = 0;
 	reg [8:0] rombank = 1;
 	
 	assign cr_nOE = decode ? ~rdlatch : 1;
-	assign cr_nWE = (decode && ((addrlatch == ADDR_PROGDATA) || (mbc_emul[6:0] == 0))) ? ~wrlatch : 1;
+	assign cr_nWE = (decode && ((addrlatch == ADDR_PROGDATA) || (addrlatch == ADDR_PROGFLASH) || (mbc_emul[6:0] == 0) || (addrlatch[15:13] == 3'b101))) ? ~wrlatch : 1;
 	
 	assign cr_DQ = (~cr_nOE) ? 16'bzzzzzzzzzzzzzzzz : {8'b0, datalatch};
 	assign cr_A = (addrlatch[15:14] == 2'b00) ? /* extrom, home bank */ {9'b0,addrlatch[13:0]} :
 			(addrlatch[15:14] == 2'b01) ? /* extrom, paged bank */ {rombank, addrlatch[13:0]} :
 			(addrlatch[15:13] == 3'b101) ? /* extram */ {1'b1, 5'b0, rambank, addrlatch[12:0]} :
-			(addrlatch == ADDR_PROGDATA) ? progaddr :
+			((addrlatch == ADDR_PROGDATA) || (addrlatch == ADDR_PROGFLASH)) ? progaddr :
 			23'b0;
 	
 	always @(posedge clk) begin
@@ -132,6 +137,10 @@ module CellularRAM(
 					progaddr <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]};
 					{progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} + 23'b1;
 				end
+		ADDR_PROGFLASH:	if (rd || wr) begin
+					progaddr <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]};
+					{progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} + 23'b1;
+				end
 		ADDR_MBC:	begin
 					mbc_emul <= data;
 					rambank <= 0;
@@ -229,9 +238,12 @@ module CoreTop(
 	input serin,
 	output wire [3:0] digits,
 	output wire [7:0] seven,
-	output wire cr_nADV, cr_nCE, cr_nOE, cr_nWE, cr_CRE, cr_nLB, cr_nUB, cr_CLK,
+	output wire cr_nADV, cr_nCE, cr_nOE, cr_nWE, cr_CRE, cr_nLB, cr_nUB, cr_CLK, st_nCE, st_nRST,
 	output wire [22:0] cr_A,
 	inout [15:0] cr_DQ,
+	input ps2c, ps2d,
+	output txp, txm,
+	input rxp, rxm,
 `endif
 	output wire hs, vs,
 	output wire [2:0] r, g,
@@ -252,17 +264,19 @@ module CoreTop(
 	wire [7:0] switches = 8'b0;
 	wire [3:0] buttons = 4'b0;
 `else	
-	wire xtalb, clk, vgaclk;
+	wire xtalb, clk, vgaclk, ethclk;
 	IBUFG iclkbuf(.O(xtalb), .I(xtal));
-	CPUDCM dcm (.CLKIN_IN(xtalb), .CLKFX_OUT(clk));
+	CPUDCM cpudcm (.CLKIN_IN(xtalb), .CLKFX_OUT(clk));
 	pixDCM pixdcm (.CLKIN_IN(xtalb), .CLKFX_OUT(vgaclk));
+	ethDCM ethdcm (.CLKIN_IN(xtalb), .CLKFX_OUT(ethclk));
+	wire [7:0] ps2buttons;
 `endif
 
 	wire [15:0] addr [1:0];
 	wire [7:0] data [1:0];
 	wire wr [1:0], rd [1:0];
 	
-	wire irq, tmrirq, lcdcirq, vblankirq;
+	wire irq, tmrirq, lcdcirq, vblankirq, btnirq;
 	wire [7:0] jaddr;
 	wire [1:0] state;
 	wire ack;
@@ -312,7 +326,9 @@ module CoreTop(
 		.cr_nUB(cr_nUB),
 		.cr_CLK(cr_CLK),
 		.cr_A(cr_A),
-		.cr_DQ(cr_DQ));
+		.cr_DQ(cr_DQ),
+		.st_nCE(st_nCE),
+		.st_nRST(st_nRST));
 `endif
 	
 	wire lcdhs, lcdvs, lcdclk;
@@ -348,15 +364,45 @@ module CoreTop(
 		.vgag(g),
 		.vgab(b));
 
+	wire [7:0] sleds;
+`ifdef isim
+	assign leds = sleds;
+`else
+	assign leds = sleds | ps2buttons;
+`endif
 	Switches sw(
 		.clk(clk),
 		.address(addr[0]),
 		.data(data[0]),
 		.wr(wr[0]),
 		.rd(rd[0]),
-		.ledout(leds),
+		.ledout(sleds),
 		.switches(switches)
 		);
+	
+`ifdef isim
+`else
+	PS2Button ps2(
+		.clk(clk),
+		.inclk(ps2c),
+		.indata(ps2d),
+		.buttons(ps2buttons)
+		);
+`endif
+	
+	Buttons ass(
+		.core_clk(clk),
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.int(btnirq),
+	`ifdef isim
+		.buttons(switches)
+	`else
+		.buttons(ps2buttons)
+	`endif
+		);
 
 	AddrMon amon(
 		.clk(clk), 
@@ -415,7 +461,7 @@ module CoreTop(
 		.lcdc(lcdcirq),
 		.tovf(tmrirq),
 		.serial(1'b0),
-		.buttons(1'b0),
+		.buttons(btnirq),
 		.master(irq),
 		.ack(ack),
 		.jaddr(jaddr));
@@ -428,4 +474,20 @@ module CoreTop(
 		.wr(wr[0]),
 		.snd_data_l(soundl),
 		.snd_data_r(soundr));
+
+`ifdef isim
+`else	
+	Ethernet eth(
+		.clk(clk),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.addr(addr[0]),
+		.data(data[0]),
+		.ethclk(ethclk),
+		.rxclk(xtalb),
+		.txp(txp),
+		.txm(txm),
+		.rxp(rxp),
+		.rxm(rxm));
+`endif
 endmodule