X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/b4f3ac35e69b7d5adf57959902abe2a104b42f4f..8e2bb38447e731bbba10c39cfb995b9b4eccd22c:/GBZ80Core.v

diff --git a/GBZ80Core.v b/GBZ80Core.v
index 05c449a..b06910a 100644
--- a/GBZ80Core.v
+++ b/GBZ80Core.v
@@ -130,14 +130,28 @@
 `define EXEC_NEXTADDR_PCINC	address <= `_PC + 1;
 `define EXEC_NEWCYCLE		begin newcycle <= 1; rd <= 1; wr <= 0; end
 `define EXEC_NEWCYCLE_TWOBYTE	begin newcycle <= 1; rd <= 1; wr <= 0; twobyte <= 1; end
-`define EXEC_WRITE(ad, da)	begin address <= (ad); wdata <= (da); wr <= 1; end end
-`define EXEC_READ(ad)		begin address <= (ad); rd <= 1; end end
+`ifdef verilator
+	`define EXEC_WRITE(ad, da)	begin address <= (ad); wdata <= (da); wr <= 1; end
+	`define EXEC_READ(ad)		begin address <= (ad); rd <= 1; end
+`else
+	`ifdef isim
+		`define EXEC_WRITE(ad, da)	begin address <= (ad); wdata <= (da); wr <= 1; end
+		`define EXEC_READ(ad)		begin address <= (ad); rd <= 1; end
+	`else
+/* Work around XST's retarded bugs :\ */
+		`define EXEC_WRITE(ad, da)	begin address <= (ad); wdata <= (da); wr <= 1; end end
+		`define EXEC_READ(ad)		begin address <= (ad); rd <= 1; end end
+	`endif
+`endif
 
 module GBZ80Core(
 	input clk,
-	output reg [15:0] busaddress,	/* BUS_* is latched on STATE_FETCH. */
-	inout [7:0] busdata,
-	output reg buswr, output reg busrd,
+	inout [15:0] bus0address,	/* BUS_* is latched on STATE_FETCH. */
+	inout [7:0] bus0data,
+	inout bus0wr, bus0rd,
+	inout [15:0] bus1address,	/* BUS_* is latched on STATE_FETCH. */
+	inout [7:0] bus1data,
+	inout bus1wr, bus1rd,
 	input irq, input [7:0] jaddr,
 	output reg [1:0] state);
 
@@ -156,7 +170,24 @@ module GBZ80Core(
 	reg [7:0] tmp, tmp2;			/* Generic temporary regs. */
 	
 	reg [7:0] buswdata;
-	assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
+	wire [7:0] busdata;
+	
+	reg [15:0] busaddress;
+	reg buswr, busrd;
+	
+	reg bootstrap_enb;
+	
+	wire bus = ((busaddress[15:8] == 8'h00) && bootstrap_enb) || ((busaddress[15:7] == 9'b111111111) && (busaddress != 16'hFFFF));	/* 0 or 1 depending on which bus */
+		
+	assign bus0address = (bus == 0) ? busaddress : 16'bzzzzzzzzzzzzzzz;
+	assign bus1address = (bus == 1) ? busaddress : 16'bzzzzzzzzzzzzzzz;
+	assign bus0data = ((bus == 0) && buswr) ? buswdata : 8'bzzzzzzzz;
+	assign bus1data = ((bus == 1) && buswr) ? buswdata : 8'bzzzzzzzz;
+	assign busdata = (bus == 0) ? bus0data : bus1data;
+	assign bus0rd = (bus == 0) ? busrd : 1'bz;
+	assign bus1rd = (bus == 1) ? busrd : 1'bz;
+	assign bus0wr = (bus == 0) ? buswr : 1'bz;
+	assign bus1wr = (bus == 1) ? buswr : 1'bz;
 
 	reg ie, iedelay;
 
@@ -185,7 +216,7 @@ module GBZ80Core(
 			2'b0,
 			tmp[0]};
 
-	assign sla   = {tmp[6:0],0};
+	assign sla   = {tmp[6:0],1'b0};
 	assign slaf  = {(tmp[6:0] == 0 ? 1'b1 : 1'b0),
 			2'b0,
 			tmp[7]};
@@ -194,10 +225,10 @@ module GBZ80Core(
 //	assign sraf  = {(tmp[7:1] == 0 ? 1'b1 : 1'b0),2'b0,tmp[0]};   now in assign srlf =
 
 	assign swap  = {tmp[3:0],tmp[7:4]};
-	assign swapf = {(tmp == 0 ? 1'b1 : 1'b0),
+	assign swapf = {(tmp == 1'b0 ? 1'b1 : 1'b0),
 			3'b0};
 
-	assign srl   = {0,tmp[7:1]};
+	assign srl   = {1'b0,tmp[7:1]};
 	assign srlf  = {(tmp[7:1] == 0 ? 1'b1 : 1'b0),
 			2'b0,
 			tmp[0]};
@@ -246,9 +277,10 @@ module GBZ80Core(
 		state <= `STATE_WRITEBACK;
 		cycle <= 0;
 		twobyte <= 0;
+		bootstrap_enb <= 1;
 	end
 
-	always @(posedge clk)
+	always @(negedge clk)	/* Set things up at the negedge to prepare for the posedge. */
 		case (state)
 		`STATE_FETCH: begin
 			if (newcycle) begin
@@ -262,17 +294,26 @@ module GBZ80Core(
 				if (wr)
 					buswdata <= wdata;
 			end
+		end
+		`STATE_DECODE: begin	/* Make sure this only happens for one clock. */
+		end
+		endcase
+	
+	always @(posedge clk)
+		case (state)
+		`STATE_FETCH: begin
+			/* Things are set up in negedge so that something looking on posedge will get his shit. */
 			state <= `STATE_DECODE;
 		end
 		`STATE_DECODE: begin
 			if (newcycle) begin
 				if (twobyte) begin
-					opcode <= {1,busdata};
+					opcode <= {1'b1,busdata};
 					twobyte <= 0;
 				end else if (ie && irq)
 					opcode <= `INSN_VOP_INTR;
 				else
-					opcode <= {0,busdata};
+					opcode <= {1'b0,busdata};
 				rdata <= busdata;
 				newcycle <= 0;
 				cycle <= 0;
@@ -284,10 +325,10 @@ module GBZ80Core(
 				ie <= 1;
 				iedelay <= 0;
 			end
-			buswr <= 0;
-			busrd <= 0;
 			wr <= 0;
 			rd <= 0;
+			buswr <= 0;
+			busrd <= 0;
 			address <= 16'bxxxxxxxxxxxxxxxx;	// Make it obvious if something of type has happened.
 			wdata <= 8'bxxxxxxxx;
 			state <= `STATE_EXECUTE;