X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/7d9d69c71187b4891b2281ab58ab8360e43290c2..6d070aeeba66499d17bd9abb9c5dfbb1317bf1c5:/Uart.v?ds=inline

diff --git a/Uart.v b/Uart.v
index f8ee27b..ab16d79 100644
--- a/Uart.v
+++ b/Uart.v
@@ -1,54 +1,102 @@
 `define IN_CLK 8388608
-`define OUT_CLK 9600
+`define OUT_CLK 57600
 `define CLK_DIV `IN_CLK / `OUT_CLK
-`define MMAP_ADDR 16'hFF50
+`define DATA_ADDR 16'hFF52
+`define STAT_ADDR 16'hFF53
 
 module UART(
 	input clk,
 	input wr,
 	input rd,
 	input [15:0] addr,
-	input [7:0] data,
-	output reg serial);
+	inout [7:0] data,
+	output reg serial = 1,
+	input serialrx);
 
-	reg [7:0] data_stor = 0;
-	reg [15:0] clkdiv = 0;
-	reg have_data = 0;
-	reg data_end = 0;
-	reg [3:0] diqing = 4'b0000;
+	wire data_decode = (addr == `DATA_ADDR);
+	wire stat_decode = (addr == `STAT_ADDR);
+	reg data_latch = 0;
+	reg stat_latch = 0;
 	
-	wire new = (wr) && (!have_data) && (addr == `MMAP_ADDR);
+	reg [7:0] tx_data = 0;
+	reg [15:0] tx_clkdiv = 0;
+	reg [3:0] tx_state = 4'b0000;
+	reg tx_busy = 0;
+	wire tx_newdata = (wr) && (!tx_busy) && data_decode;
+	
+	reg rx_hasdata = 0;
+	reg [15:0] rx_clkdiv = 0;
+	reg [3:0] rx_state = 4'b0000;
+	reg [7:0] rx_data, rx_data_tmp;
+	
+	assign data = (stat_latch) ? {6'b0, rx_hasdata, tx_busy} :
+			(data_latch) ? rx_data :
+			8'bzzzzzzzz;
 
-	always @ (negedge clk)
+	always @(posedge clk)
 	begin
-		/* deal with diqing */
-		if(new) begin
-			data_stor <= data;
-			have_data <= 1;
-			diqing <= 4'b0000;
-		end else if (clkdiv == 0) begin
-			diqing <= diqing + 1;
-			if (have_data)
-				case (diqing)
+		data_latch <= rd && data_decode;
+		stat_latch <= rd && stat_decode;
+		if(tx_newdata) begin
+			tx_data <= data;
+			tx_state <= 4'b0000;
+			tx_busy <= 1;
+		end else if (tx_clkdiv == 0) begin
+			tx_state <= tx_state + 1;
+			if (tx_busy)
+				case (tx_state)
 				4'b0000: serial <= 0;
-				4'b0001: serial <= data_stor[0];
-				4'b0010: serial <= data_stor[1];
-				4'b0011: serial <= data_stor[2];
-				4'b0100: serial <= data_stor[3];
-				4'b0101: serial <= data_stor[4];
-				4'b0110: serial <= data_stor[5];
-				4'b0111: serial <= data_stor[6];
-				4'b1000: serial <= data_stor[7];
+				4'b0001: serial <= tx_data[0];
+				4'b0010: serial <= tx_data[1];
+				4'b0011: serial <= tx_data[2];
+				4'b0100: serial <= tx_data[3];
+				4'b0101: serial <= tx_data[4];
+				4'b0110: serial <= tx_data[5];
+				4'b0111: serial <= tx_data[6];
+				4'b1000: serial <= tx_data[7];
 				4'b1001: serial <= 1;
-				4'b1010: have_data <= 0;
+				4'b1010: tx_busy <= 0;
 				default: $stop;
+				endcase
+		end
+		
+		if ((rx_state == 0) && (serialrx == 0) /*&& (rx_hasdata == 0)*/)		/* Kick off. */
+			rx_state <= 4'b0001;
+		else if ((rx_state != 4'b0000) && (rx_clkdiv == 0)) begin
+			if (rx_state != 4'b1010)
+				rx_state <= rx_state + 1;
+			else
+				rx_state <= 0;
+			case (rx_state)
+			4'b0001:	begin end /* Twiddle thumbs -- this is the end of the half bit. */
+			4'b0010:	rx_data_tmp[0] <= serialrx;
+			4'b0011:	rx_data_tmp[1] <= serialrx;
+			4'b0100:	rx_data_tmp[2] <= serialrx;
+			4'b0101:	rx_data_tmp[3] <= serialrx;
+			4'b0110:	rx_data_tmp[4] <= serialrx;
+			4'b0111:	rx_data_tmp[5] <= serialrx;
+			4'b1000:	rx_data_tmp[6] <= serialrx;
+			4'b1001:	rx_data_tmp[7] <= serialrx;
+			4'b1010:	if (serialrx == 1) begin
+						rx_data <= rx_data_tmp; /* Expect a 1 */
+						rx_hasdata <= 1;
+					end
 			endcase
 		end
+		
+		if (rd && data_decode)
+			rx_hasdata <= 0;
 
-		/* deal with clkdiv */
-		if((new && !have_data) || clkdiv == `CLK_DIV)
-			clkdiv <= 0;
+		if(tx_newdata || (tx_clkdiv == `CLK_DIV))
+			tx_clkdiv <= 0;
+		else
+			tx_clkdiv <= tx_clkdiv + 1;
+		
+		if ((rx_state == 0) && (serialrx == 0) /*&& (rx_hasdata == 0)*/)		/* Wait half a period before advancing. */
+			rx_clkdiv <= `CLK_DIV / 2 + `CLK_DIV / 4;
+		else if (rx_clkdiv == `CLK_DIV)
+			rx_clkdiv <= 0;
 		else
-			clkdiv <= clkdiv + 1;
+			rx_clkdiv <= rx_clkdiv + 1;
 	end
 endmodule