X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/2e642f1f5c3cb12c3a34983d9fbdd0141ca34931..6b4e28281b4fa98272bead1eedeea577e8778169:/GBZ80Core.v diff --git a/GBZ80Core.v b/GBZ80Core.v index fc77377..0697295 100644 --- a/GBZ80Core.v +++ b/GBZ80Core.v @@ -37,6 +37,16 @@ `define INSN_RST 8'b11xxx111 `define INSN_RET 8'b110x1001 // 1 = RETI, 0 = RET `define INSN_CALL 8'b11001101 +`define INSN_CALLCC 8'b110xx100 // Not that call/cc. +`define INSN_JP_imm 8'b11000011 +`define INSN_JPCC_imm 8'b110xx010 +`define INSN_ALU_A 8'b00xxx111 +`define INSN_JP_HL 8'b11101001 + +`define INSN_cc_NZ 2'b00 +`define INSN_cc_Z 2'b01 +`define INSN_cc_NC 2'b10 +`define INSN_cc_C 2'b11 `define INSN_reg_A 3'b111 `define INSN_reg_B 3'b000 @@ -62,6 +72,14 @@ `define INSN_alu_XOR 3'b101 `define INSN_alu_OR 3'b110 `define INSN_alu_CP 3'b111 // Oh lawd, is dat some CP? +`define INSN_alu_RLCA 3'b000 +`define INSN_alu_RRCA 3'b001 +`define INSN_alu_RLA 3'b010 +`define INSN_alu_RRA 3'b011 +`define INSN_alu_DAA 3'b100 +`define INSN_alu_CPL 3'b101 +`define INSN_alu_SCF 3'b110 +`define INSN_alu_CCF 3'b111 module GBZ80Core( input clk, @@ -273,7 +291,7 @@ module GBZ80Core( `INSN_stack_HL: wdata <= registers[`REG_L]; endcase end - 2: begin /* TWIDDLE OUR FUCKING THUMBS! */ end + 2: begin /* Twiddle thumbs. */ end 3: begin `EXEC_NEWCYCLE; `EXEC_INC_PC; @@ -350,6 +368,10 @@ module GBZ80Core( endcase end end + `INSN_ALU_A: begin + `EXEC_NEWCYCLE; + `EXEC_INC_PC; + end `INSN_NOP: begin `EXEC_NEWCYCLE; `EXEC_INC_PC; @@ -393,7 +415,7 @@ module GBZ80Core( end endcase end - `INSN_CALL: begin + `INSN_CALL,`INSN_CALLCC: begin case (cycle) 0: begin `EXEC_INC_PC; @@ -407,6 +429,14 @@ module GBZ80Core( end 2: begin `EXEC_INC_PC; + if (!opcode[0]) // i.e., is callcc + /* We need to check the condition code to bail out. */ + case (opcode[4:3]) + `INSN_cc_NZ: if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end + `INSN_cc_Z: if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end + `INSN_cc_NC: if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end + `INSN_cc_C: if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end + endcase end 3: begin address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1; @@ -423,6 +453,38 @@ module GBZ80Core( end endcase end + `INSN_JP_imm,`INSN_JPCC_imm: begin + case (cycle) + 0: begin + `EXEC_INC_PC; + `EXEC_NEXTADDR_PCINC; + rd <= 1; + end + 1: begin + `EXEC_INC_PC; + `EXEC_NEXTADDR_PCINC; + rd <= 1; + end + 2: begin + `EXEC_INC_PC; + if (!opcode[0]) begin // i.e., JP cc,nn + /* We need to check the condition code to bail out. */ + case (opcode[4:3]) + `INSN_cc_NZ: if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end + `INSN_cc_Z: if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end + `INSN_cc_NC: if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end + `INSN_cc_C: if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end + endcase + end + end + 3: begin + `EXEC_NEWCYCLE; + end + endcase + end + `INSN_JP_HL: begin + `EXEC_NEWCYCLE; + end default: $stop; endcase @@ -587,6 +649,28 @@ module GBZ80Core( registers[`REG_F][3:0] }; end + `INSN_alu_SUB: begin + registers[`REG_A] <= + registers[`REG_A] - tmp; + registers[`REG_F] <= + { /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0, + /* N */ 1'b1, + /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0, + /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0, + registers[`REG_F][3:0] + }; + end + `INSN_alu_SBC: begin + registers[`REG_A] <= + registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]}); + registers[`REG_F] <= + { /* Z */ ((registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]})) == 0) ? 1'b1 : 1'b0, + /* N */ 1'b1, + /* H */ (({1'b0,registers[`REG_A][3:0]} - ({1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]})) >> 4 == 1) ? 1'b1 : 1'b0, + /* C */ (({1'b0,registers[`REG_A]} - ({1'b0,tmp} + {8'b0,registers[`REG_F][4]})) >> 8 == 1) ? 1'b1 : 1'b0, + registers[`REG_F][3:0] + }; + end `INSN_alu_AND: begin registers[`REG_A] <= registers[`REG_A] & tmp; @@ -614,11 +698,50 @@ module GBZ80Core( registers[`REG_F][3:0] }; end + `INSN_alu_CP: begin + registers[`REG_F] <= + { /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0, + /* N */ 1'b1, + /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0, + /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0, + registers[`REG_F][3:0] + }; + end default: $stop; endcase end end + `INSN_ALU_A: begin + case(opcode[5:3]) + `INSN_alu_RLCA: begin + registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_A][7]}; + registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]}; + end + `INSN_alu_RRCA: begin + registers[`REG_A] <= {registers[`REG_A][0],registers[`REG_A][7:1]}; + registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]}; + end + `INSN_alu_RLA: begin + registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_F][4]}; + registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]}; + end + `INSN_alu_RRA: begin + registers[`REG_A] <= {registers[`REG_A][4],registers[`REG_A][7:1]}; + registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]}; + end + `INSN_alu_CPL: begin + registers[`REG_A] <= ~registers[`REG_A]; + registers[`REG_F] <= {registers[`REG_F][7],1'b1,1'b1,registers[`REG_F][4:0]}; + end + `INSN_alu_SCF: begin + registers[`REG_F] <= {registers[`REG_F][7:5],1,registers[`REG_F][3:0]}; + end + `INSN_alu_CCF: begin + registers[`REG_F] <= {registers[`REG_F][7:5],~registers[`REG_F][4],registers[`REG_F][3:0]}; + end + endcase + end `INSN_NOP: begin /* NOP! */ end `INSN_RST: begin case (cycle) @@ -642,7 +765,7 @@ module GBZ80Core( end endcase end - `INSN_CALL: begin + `INSN_CALL,`INSN_CALLCC: begin case (cycle) 0: begin /* type F */ end 1: tmp <= rdata; // tmp contains newpcl @@ -656,6 +779,19 @@ module GBZ80Core( end endcase end + `INSN_JP_imm,`INSN_JPCC_imm: begin + case (cycle) + 0: begin /* type F */ end + 1: tmp <= rdata; // tmp contains newpcl + 2: tmp2 <= rdata; // tmp2 contains newpch + 3: {registers[`REG_PCH],registers[`REG_PCL]} <= + {tmp2,tmp}; + endcase + end + `INSN_JP_HL: begin + {registers[`REG_PCH],registers[`REG_PCL]} <= + {registers[`REG_H],registers[`REG_L]}; + end default: $stop; endcase @@ -663,155 +799,3 @@ module GBZ80Core( end endcase endmodule - -`timescale 1ns / 1ps -module ROM( - input [15:0] address, - inout [7:0] data, - input clk, - input wr, rd); - - reg [7:0] rom [2047:0]; - initial $readmemh("rom.hex", rom); - - wire decode = address[15:13] == 0; - wire [7:0] odata = rom[address[11:0]]; - assign data = (rd && decode) ? odata : 8'bzzzzzzzz; - //assign data = rd ? odata : 8'bzzzzzzzz; -endmodule - -module InternalRAM( - input [15:0] address, - inout [7:0] data, - input clk, - input wr, rd); - - reg [7:0] ram [8191:0]; - - wire decode = (address >= 16'hC000) && (address < 16'hFE00); - reg [7:0] odata; - wire idata = data; - assign data = (rd && decode) ? odata : 8'bzzzzzzzz; - - always @(negedge clk) - begin - if (decode && rd) - odata <= ram[address[12:0]]; - else if (decode && wr) - ram[address[12:0]] <= data; - end -endmodule - -//module Switches( -// input [15:0] address, -// inout [7:0] data, -// input clk, -// input wr, rd, -// input [7:0] switches, -// output reg [7:0] ledout); - -// wire decode = address == 16'hFF51; -// reg [7:0] odata; -// wire idata = data; -// assign data = (rd && decode) ? odata : 8'bzzzzzzzz; - -// always @(negedge clk) -// begin -// if (decode && rd) -// odata <= switches; -// else if (decode && wr) -// ledout <= data; -// end -//endmodule - -module CoreTop( - input iclk, xtal, - output wire [7:0] leds, - output serio, - output wire [3:0] digits, - output wire [7:0] seven); - - wire clk; - //IBUFG ibuf (.O(clk), .I(iclk)); - - CPUDCM dcm (.CLKIN_IN(xtal), .CLKFX_OUT(clk)); - - wire [15:0] addr; - wire [7:0] data; - wire wr, rd; - - assign leds = iclk?{rd,wr,addr[5:0]}:data[7:0]; - - GBZ80Core core( - .clk(clk), - .busaddress(addr), - .busdata(data), - .buswr(wr), - .busrd(rd)); - - ROM rom( - .address(addr), - .data(data), - .clk(clk), - .wr(wr), - .rd(rd)); - - AddrMon amon( - .addr(addr), - .clk(xtal), - .digit(digits), - .out(seven) - ); - - assign serio = 0; -endmodule - -module TestBench(); - reg clk = 0; - wire [15:0] addr; - wire [7:0] data; - wire wr, rd; - -// wire [7:0] leds; -// wire [7:0] switches; - - always #10 clk <= ~clk; - GBZ80Core core( - .clk(clk), - .busaddress(addr), - .busdata(data), - .buswr(wr), - .busrd(rd)); - - ROM rom( - .clk(clk), - .address(addr), - .data(data), - .wr(wr), - .rd(rd)); - -// InternalRAM ram( -// .address(addr), -// .data(data), -// .clk(clk), -// .wr(wr), -// .rd(rd)); - -// wire serio; -// UART uart( -// .addr(addr), -// .data(data), -// .clk(clk), -// .wr(wr), -// .rd(rd), -// .serial(serio)); - -// Switches sw( -// .clk(clk), -// .address(addr), -// .data(data), -// .wr(wr), -// .rd(rd), -// .switches(switches), -// .leds(leds)); -endmodule