X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/298e8085b4f8f70121204fa4aed3a188034f6879..492e55f50f4660d16be8e81466813096d492e67d:/System.v?ds=inline

diff --git a/System.v b/System.v
index 8f9ef08..02b424c 100644
--- a/System.v
+++ b/System.v
@@ -1,6 +1,6 @@
 
 `timescale 1ns / 1ps
-module ROM(
+module SimROM(
 	input [15:0] address,
 	inout [7:0] data,
 	input clk,
@@ -9,8 +9,7 @@ module ROM(
 	reg rdlatch = 0;
 	reg [7:0] odata;
 
-	// synthesis attribute ram_style of rom is block
-	reg [7:0] rom [1023:0];
+	reg [7:0] rom [32767:0];
 	initial $readmemh("rom.hex", rom);
 
 	wire decode = address[15:13] == 0;
@@ -35,6 +34,10 @@ module BootstrapROM(
 	
 	initial $readmemh("fpgaboot.hex", brom0);
 	initial $readmemh("gbboot.hex", brom1);
+	
+`ifdef isim
+	initial romno <= 1;
+`endif
 
 	wire decode = address[15:8] == 0;
 	wire [7:0] odata = (romno == 0) ? brom0[addrlatch] : brom1[addrlatch];
@@ -85,6 +88,7 @@ module CellularRAM(
 	parameter ADDR_PROGADDRM = 16'hFF61;
 	parameter ADDR_PROGADDRL = 16'hFF62;
 	parameter ADDR_PROGDATA = 16'hFF63;
+	parameter ADDR_MBC = 16'hFF64;
 	
 	reg rdlatch = 0, wrlatch = 0;
 	reg [15:0] addrlatch = 0;
@@ -94,6 +98,9 @@ module CellularRAM(
 	
 	reg [22:0] progaddr;
 	
+	reg [7:0] mbc_emul = 8'b00000101;	// High bit is whether we're poking flash
+						// low 7 bits are the MBC that we are emulating
+	
 	assign cr_nADV = 0;	/* Addresses are always valid! :D */
 	assign cr_nCE = 0;	/* The chip is enabled */
 	assign cr_nLB = 0;	/* Lower byte is enabled */
@@ -103,27 +110,44 @@ module CellularRAM(
 	
 	wire decode = (addrlatch[15:14] == 2'b00) /* extrom */ || (addrlatch[15:13] == 3'b101) /* extram */ || (addrlatch == ADDR_PROGDATA);
 	
+	reg [3:0] rambank = 0;
+	reg [8:0] rombank = 1;
+	
 	assign cr_nOE = decode ? ~rdlatch : 1;
-	assign cr_nWE = decode ? ~wrlatch : 1;
+	assign cr_nWE = (decode && ((addrlatch == ADDR_PROGDATA) || (mbc_emul[6:0] == 0) || (addrlatch[15:13] == 3'b101))) ? ~wrlatch : 1;
 	
 	assign cr_DQ = (~cr_nOE) ? 16'bzzzzzzzzzzzzzzzz : {8'b0, datalatch};
-	assign cr_A = (addrlatch[15:14] == 2'b00) ? /* extrom */ {9'b0,addrlatch[13:0]} :
-			(addrlatch[15:13] == 3'b101) ? {1'b1, 9'b0, addrlatch[12:0]} :
+	assign cr_A = (addrlatch[15:14] == 2'b00) ? /* extrom, home bank */ {9'b0,addrlatch[13:0]} :
+			(addrlatch[15:14] == 2'b01) ? /* extrom, paged bank */ {rombank, addrlatch[13:0]} :
+			(addrlatch[15:13] == 3'b101) ? /* extram */ {1'b1, 5'b0, rambank, addrlatch[12:0]} :
 			(addrlatch == ADDR_PROGDATA) ? progaddr :
 			23'b0;
 	
-	reg [7:0] regbuf;
-	
 	always @(posedge clk) begin
 		case (address)
 		ADDR_PROGADDRH: if (wr) progaddrh <= data;
 		ADDR_PROGADDRM: if (wr) progaddrm <= data;
 		ADDR_PROGADDRL: if (wr) progaddrl <= data;
 		ADDR_PROGDATA:	if (rd || wr) begin
-					progaddr <= {progaddrh[6:0], progaddrm[7:0], progaddr[7:0]};
-					{progaddrh[6:0], progaddrm[7:0], progaddr[7:0]} <= {progaddrh[6:0], progaddrm[7:0], progaddr[7:0]} + 23'b1;
+					progaddr <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]};
+					{progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} <= {progaddrh[6:0], progaddrm[7:0], progaddrl[7:0]} + 23'b1;
+				end
+		ADDR_MBC:	begin
+					mbc_emul <= data;
+					rambank <= 0;
+					rombank <= 1;
 				end
 		endcase
+		
+		if (mbc_emul[6:0] == 5) begin
+			if ((address[15:12] == 4'h2) && wr)
+				rombank <= {rombank[8], data};
+			else if ((address[15:12] == 4'h3) && wr)
+				rombank <= {data[0], rombank[7:0]};
+			else if ((address[15:12] == 4'h4) && wr)
+				rambank <= data[3:0];
+		end
+		
 		rdlatch <= rd;
 		wrlatch <= wr;
 		addrlatch <= address;
@@ -208,6 +232,7 @@ module CoreTop(
 	output wire cr_nADV, cr_nCE, cr_nOE, cr_nWE, cr_CRE, cr_nLB, cr_nUB, cr_CLK,
 	output wire [22:0] cr_A,
 	inout [15:0] cr_DQ,
+	input ps2c, ps2d,
 `endif
 	output wire hs, vs,
 	output wire [2:0] r, g,
@@ -232,15 +257,17 @@ module CoreTop(
 	IBUFG iclkbuf(.O(xtalb), .I(xtal));
 	CPUDCM dcm (.CLKIN_IN(xtalb), .CLKFX_OUT(clk));
 	pixDCM pixdcm (.CLKIN_IN(xtalb), .CLKFX_OUT(vgaclk));
+	wire [7:0] ps2buttons;
 `endif
 
 	wire [15:0] addr [1:0];
 	wire [7:0] data [1:0];
 	wire wr [1:0], rd [1:0];
 	
-	wire irq, tmrirq, lcdcirq, vblankirq;
+	wire irq, tmrirq, lcdcirq, vblankirq, btnirq;
 	wire [7:0] jaddr;
 	wire [1:0] state;
+	wire ack;
 	
 	GBZ80Core core(
 		.clk(clk),
@@ -253,6 +280,7 @@ module CoreTop(
 		.bus1wr(wr[1]),
 		.bus1rd(rd[1]),
 		.irq(irq),
+		.irqack(ack),
 		.jaddr(jaddr),
 		.state(state));
 	
@@ -264,7 +292,7 @@ module CoreTop(
 		.rd(rd[1]));
 	
 `ifdef isim
-	ROM rom(
+	SimROM rom(
 		.address(addr[0]),
 		.data(data[0]),
 		.clk(clk),
@@ -321,7 +349,47 @@ module CoreTop(
 		.vgar(r),
 		.vgag(g),
 		.vgab(b));
+
+	wire [7:0] sleds;
+`ifdef isim
+	assign leds = sleds;
+`else
+	assign leds = sleds | ps2buttons;
+`endif
+	Switches sw(
+		.clk(clk),
+		.address(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.ledout(sleds),
+		.switches(switches)
+		);
+	
+`ifdef isim
+`else
+	PS2Button ps2(
+		.clk(clk),
+		.inclk(ps2c),
+		.indata(ps2d),
+		.buttons(ps2buttons)
+		);
+`endif
 	
+	Buttons ass(
+		.core_clk(clk),
+		.addr(addr[0]),
+		.data(data[0]),
+		.wr(wr[0]),
+		.rd(rd[0]),
+		.int(btnirq),
+	`ifdef isim
+		.buttons(switches)
+	`else
+		.buttons(ps2buttons)
+	`endif
+		);
+
 	AddrMon amon(
 		.clk(clk), 
 		.addr(addr[0]),
@@ -334,16 +402,6 @@ module CoreTop(
 			(state == 2'b10) ? 4'b1000 :
 			                   4'b0100) );
 	 
-	Switches sw(
-		.clk(clk),
-		.address(addr[0]),
-		.data(data[0]),
-		.wr(wr[0]),
-		.rd(rd[0]),
-		.ledout(leds),
-		.switches(switches)
-		);
-
 	UART nouart (	/* no u */
 		.clk(clk),
 		.addr(addr[0]),
@@ -389,8 +447,9 @@ module CoreTop(
 		.lcdc(lcdcirq),
 		.tovf(tmrirq),
 		.serial(1'b0),
-		.buttons(1'b0),
+		.buttons(btnirq),
 		.master(irq),
+		.ack(ack),
 		.jaddr(jaddr));
 	
 	Soundcore sound(