X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/241c995cb7db3feeeb57d11625dc8fd34c166d82..69ca9b5f404e06ddf52dc24e40257e3f28aade3d:/GBZ80Core.v

diff --git a/GBZ80Core.v b/GBZ80Core.v
index 968cd26..338c2d7 100644
--- a/GBZ80Core.v
+++ b/GBZ80Core.v
@@ -29,7 +29,14 @@
 `define INSN_LD_reg_imm16	8'b00xx0001
 `define INSN_LD_SP_HL		8'b11111001
 `define INSN_PUSH_reg		8'b11xx0101
-`define INSN_POP_reg		8'b11xx0001
+`define INSN_POP_reg			8'b11xx0001
+`define INSN_LDH_AC			8'b111x0010	// Either LDH A,(C) or LDH (C),A
+`define INSN_LDx_AHL			8'b001xx010	// LDD/LDI A,(HL) / (HL),A
+`define INSN_ALU8				8'b10xxxxxx	// 10 xxx yyy
+`define INSN_NOP				8'b00000000
+`define INSN_RST				8'b11xxx111
+`define INSN_RET				8'b110x1001	// 1 = RETI, 0 = RET
+
 `define INSN_reg_A		3'b111
 `define INSN_reg_B		3'b000
 `define INSN_reg_C		3'b001
@@ -46,6 +53,15 @@
 `define INSN_stack_BC	2'b00
 `define INSN_stack_DE	2'b01
 `define INSN_stack_HL	2'b10
+`define INSN_alu_ADD		3'b000
+`define INSN_alu_ADC		3'b001
+`define INSN_alu_SUB		3'b010
+`define INSN_alu_SBC		3'b011
+`define INSN_alu_AND		3'b100
+`define INSN_alu_XOR		3'b101
+`define INSN_alu_OR		3'b110
+`define INSN_alu_CP		3'b111		// Oh lawd, is dat some CP?
+
 module GBZ80Core(
 	input clk,
 	output reg [15:0] busaddress,	/* BUS_* is latched on STATE_FETCH. */
@@ -69,6 +85,8 @@ module GBZ80Core(
 	reg [7:0] buswdata;
 	assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
 	
+	reg ie = 0;
+	
 	initial begin
 		registers[ 0] <= 0;
 		registers[ 1] <= 0;
@@ -128,7 +146,7 @@ module GBZ80Core(
 						`EXEC_NEXTADDR_PCINC;
 						rd <= 1;
 					end
-				1: begin
+				1:	begin
 						`EXEC_INC_PC;
 						if (opcode[5:3] == `INSN_reg_dHL) begin
 							address <= {registers[`REG_H], registers[`REG_L]};
@@ -139,7 +157,7 @@ module GBZ80Core(
 							`EXEC_NEWCYCLE;
 						end
 					end
-				2: begin
+				2:	begin
 						`EXEC_NEWCYCLE;
 					end
 				endcase
@@ -152,13 +170,13 @@ module GBZ80Core(
 				case (cycle)
 				0:	begin
 						case (opcode[2:0])
-						`INSN_reg_A:	begin wdata <= registers[`REG_A]; end
-						`INSN_reg_B:	begin wdata <= registers[`REG_B]; end
-						`INSN_reg_C:	begin wdata <= registers[`REG_C]; end
-						`INSN_reg_D:	begin wdata <= registers[`REG_D]; end
-						`INSN_reg_E:	begin wdata <= registers[`REG_E]; end
-						`INSN_reg_H:	begin wdata <= registers[`REG_H]; end
-						`INSN_reg_L:	begin wdata <= registers[`REG_L]; end
+						`INSN_reg_A:	wdata <= registers[`REG_A];
+						`INSN_reg_B:	wdata <= registers[`REG_B];
+						`INSN_reg_C:	wdata <= registers[`REG_C];
+						`INSN_reg_D:	wdata <= registers[`REG_D];
+						`INSN_reg_E:	wdata <= registers[`REG_E];
+						`INSN_reg_H:	wdata <= registers[`REG_H];
+						`INSN_reg_L:	wdata <= registers[`REG_L];
 						endcase
 						address <= {registers[`REG_H], registers[`REG_L]};
 						wr <= 1; rd <= 0;
@@ -171,11 +189,11 @@ module GBZ80Core(
 			end
 			`INSN_LD_reg_HL: begin
 				case(cycle)
-				0: begin
+				0:	begin
 						address <= {registers[`REG_H], registers[`REG_L]};
 						rd <= 1;
 					end
-				1: begin
+				1:	begin
 						tmp <= rdata;
 						`EXEC_INC_PC;
 						`EXEC_NEWCYCLE;
@@ -186,13 +204,13 @@ module GBZ80Core(
 				`EXEC_INC_PC;
 				`EXEC_NEWCYCLE;
 				case (opcode[2:0])
-				`INSN_reg_A:	begin tmp <= registers[`REG_A]; end
-				`INSN_reg_B:	begin tmp <= registers[`REG_B]; end
-				`INSN_reg_C:	begin tmp <= registers[`REG_C]; end
-				`INSN_reg_D:	begin tmp <= registers[`REG_D]; end
-				`INSN_reg_E:	begin tmp <= registers[`REG_E]; end
-				`INSN_reg_H:	begin tmp <= registers[`REG_H]; end
-				`INSN_reg_L:	begin tmp <= registers[`REG_L]; end
+				`INSN_reg_A:	tmp <= registers[`REG_A];
+				`INSN_reg_B:	tmp <= registers[`REG_B];
+				`INSN_reg_C:	tmp <= registers[`REG_C];
+				`INSN_reg_D:	tmp <= registers[`REG_D];
+				`INSN_reg_E:	tmp <= registers[`REG_E];
+				`INSN_reg_H:	tmp <= registers[`REG_H];
+				`INSN_reg_L:	tmp <= registers[`REG_L];
 				endcase
 			end
 			`INSN_LD_reg_imm16: begin
@@ -223,7 +241,7 @@ module GBZ80Core(
 			end
 			`INSN_PUSH_reg: begin	/* PUSH is 16 cycles! */
 				case (cycle)
-				0: begin
+				0:	begin
 						wr <= 1;
 						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
 						case (opcode[5:4])
@@ -233,7 +251,7 @@ module GBZ80Core(
 						`INSN_stack_HL:	wdata <= registers[`REG_H];
 						endcase
 					end
-				1: begin
+				1:	begin
 						wr <= 1;
 						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
 						case (opcode[5:4])
@@ -244,7 +262,7 @@ module GBZ80Core(
 						endcase
 					end
 				2:	begin /* TWIDDLE OUR FUCKING THUMBS! */ end
-				3: begin
+				3:	begin
 						`EXEC_NEWCYCLE;
 						`EXEC_INC_PC;
 					end
@@ -252,20 +270,117 @@ module GBZ80Core(
 			end
 			`INSN_POP_reg: begin	/* POP is 12 cycles! */
 				case (cycle)
-				0: begin
+				0:	begin
 						rd <= 1;
 						address <= {registers[`REG_SPH],registers[`REG_SPL]};
 					end
-				1: begin
+				1:	begin
 						rd <= 1;
 						address <= {registers[`REG_SPH],registers[`REG_SPL]};
 					end
-				2: begin
+				2:	begin
+						`EXEC_NEWCYCLE;
+						`EXEC_INC_PC;
+					end
+				endcase
+			end
+			`INSN_LDH_AC: begin
+				case (cycle)
+				0:	begin
+						address <= {8'hFF,registers[`REG_C]};
+						if (opcode[4]) begin	// LD A,(C)
+							rd <= 1;
+						end else begin
+							wr <= 1;
+							wdata <= registers[`REG_A];
+						end
+					end
+				1:	begin
+						`EXEC_NEWCYCLE;
+						`EXEC_INC_PC;
+					end
+				endcase
+			end
+			`INSN_LDx_AHL: begin
+				case (cycle)
+				0:	begin
+						address <= {registers[`REG_H],registers[`REG_L]};
+						if (opcode[3]) begin	// LDx A, (HL)
+							rd <= 1;
+						end else begin
+							wr <= 1;
+							wdata <= registers[`REG_A];
+						end
+					end
+				1:	begin
 						`EXEC_NEWCYCLE;
 						`EXEC_INC_PC;
 					end
 				endcase
 			end
+			`INSN_ALU8: begin
+				if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
+					// fffffffff fuck your shit, read from (HL) :(
+					rd <= 1;
+					address <= {registers[`REG_H], registers[`REG_L]};
+				end else begin
+					`EXEC_NEWCYCLE;
+					`EXEC_INC_PC;
+					case (opcode[2:0])
+					`INSN_reg_A:	tmp <= registers[`REG_A];
+					`INSN_reg_B:	tmp <= registers[`REG_B];
+					`INSN_reg_C:	tmp <= registers[`REG_C];
+					`INSN_reg_D:	tmp <= registers[`REG_D];
+					`INSN_reg_E:	tmp <= registers[`REG_E];
+					`INSN_reg_H:	tmp <= registers[`REG_H];
+					`INSN_reg_L:	tmp <= registers[`REG_L];
+					`INSN_reg_dHL:	tmp <= rdata;
+					endcase
+				end
+			end
+			`INSN_NOP: begin
+				`EXEC_NEWCYCLE;
+				`EXEC_INC_PC;
+			end
+			`INSN_RST: begin
+				case (cycle)
+				0:	begin
+						`EXEC_INC_PC;		// This goes FIRST in RST
+					end
+				1:	begin
+						wr <= 1;
+						address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
+						wdata <= registers[`REG_PCH];
+					end
+				2:	begin
+						wr <= 1;
+						address <= {registers[`REG_SPH],registers[`REG_SPL]}-2;
+						wdata <= registers[`REG_PCL];
+					end
+				3:	begin
+						`EXEC_NEWCYCLE;
+						{registers[`REG_PCH],registers[`REG_PCL]} <=
+							{10'b0,opcode[5:3],3'b0};
+					end
+				endcase
+			end
+			`INSN_RET: begin
+				case (cycle)
+				0:	begin
+						rd <= 1;
+						address <= {registers[`REG_SPH],registers[`REG_SPL]};
+					end
+				1:	begin
+						rd <= 1;
+						address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+					end
+				2:	begin /* twiddle thumbs */ end
+				3:	begin
+						`EXEC_NEWCYCLE;
+						// do NOT increment PC!
+					end
+				endcase
+			end
 			default:
 				$stop;
 			endcase
@@ -275,8 +390,8 @@ module GBZ80Core(
 			casex (opcode)
 			`INSN_LD_reg_imm8:
 				case (cycle)
-				0: cycle <= 1;
-				1: case (opcode[5:3])
+				0:	cycle <= 1;
+				1:	case (opcode[5:3])
 					`INSN_reg_A:	begin registers[`REG_A] <= rdata; cycle <= 0; end
 					`INSN_reg_B:	begin registers[`REG_B] <= rdata; cycle <= 0; end
 					`INSN_reg_C:	begin registers[`REG_C] <= rdata; cycle <= 0; end
@@ -286,7 +401,7 @@ module GBZ80Core(
 					`INSN_reg_L:	begin registers[`REG_L] <= rdata; cycle <= 0; end
 					`INSN_reg_dHL:	cycle <= 2;
 					endcase
-				2: cycle <= 0;
+				2:	cycle <= 0;
 				endcase
 			`INSN_HALT: begin
 				/* Nothing needs happen here. */
@@ -294,8 +409,8 @@ module GBZ80Core(
 			end
 			`INSN_LD_HL_reg: begin
 				case (cycle)
-				0: cycle <= 1;
-				1: cycle <= 0;
+				0:	cycle <= 1;
+				1:	cycle <= 0;
 				endcase
 			end
 			`INSN_LD_reg_HL: begin
@@ -303,13 +418,13 @@ module GBZ80Core(
 				0:	cycle <= 1;
 				1:	begin
 						case (opcode[5:3])
-						`INSN_reg_A:	begin registers[`REG_A] <= tmp; end
-						`INSN_reg_B:	begin registers[`REG_B] <= tmp; end
-						`INSN_reg_C:	begin registers[`REG_C] <= tmp; end
-						`INSN_reg_D:	begin registers[`REG_D] <= tmp; end
-						`INSN_reg_E:	begin registers[`REG_E] <= tmp; end
-						`INSN_reg_H:	begin registers[`REG_H] <= tmp; end
-						`INSN_reg_L:	begin registers[`REG_L] <= tmp; end
+						`INSN_reg_A:	registers[`REG_A] <= tmp;
+						`INSN_reg_B:	registers[`REG_B] <= tmp;
+						`INSN_reg_C:	registers[`REG_C] <= tmp;
+						`INSN_reg_D:	registers[`REG_D] <= tmp;
+						`INSN_reg_E:	registers[`REG_E] <= tmp;
+						`INSN_reg_H:	registers[`REG_H] <= tmp;
+						`INSN_reg_L:	registers[`REG_L] <= tmp;
 						endcase
 						cycle <= 0;
 					end
@@ -317,13 +432,13 @@ module GBZ80Core(
 			end
 			`INSN_LD_reg_reg: begin
 				case (opcode[5:3])
-				`INSN_reg_A:	begin registers[`REG_A] <= tmp; end
-				`INSN_reg_B:	begin registers[`REG_B] <= tmp; end
-				`INSN_reg_C:	begin registers[`REG_C] <= tmp; end
-				`INSN_reg_D:	begin registers[`REG_D] <= tmp; end
-				`INSN_reg_E:	begin registers[`REG_E] <= tmp; end
-				`INSN_reg_H:	begin registers[`REG_H] <= tmp; end
-				`INSN_reg_L:	begin registers[`REG_L] <= tmp; end
+				`INSN_reg_A:	registers[`REG_A] <= tmp;
+				`INSN_reg_B:	registers[`REG_B] <= tmp;
+				`INSN_reg_C:	registers[`REG_C] <= tmp;
+				`INSN_reg_D:	registers[`REG_D] <= tmp;
+				`INSN_reg_E:	registers[`REG_E] <= tmp;
+				`INSN_reg_H:	registers[`REG_H] <= tmp;
+				`INSN_reg_L:	registers[`REG_L] <= tmp;
 				endcase
 			end
 			`INSN_LD_reg_imm16: begin
@@ -405,7 +520,124 @@ module GBZ80Core(
 						cycle <= 0;
 					end
 				endcase
-			end	
+			end
+			`INSN_LDH_AC: begin
+				case (cycle)
+				0:	cycle <= 1;
+				1: begin
+						cycle <= 0;
+						if (opcode[4])
+							registers[`REG_A] <= rdata;
+					end
+				endcase
+			end
+			`INSN_LDx_AHL: begin
+				case (cycle)
+				0:	cycle <= 1;
+				1:	begin
+						cycle <= 0;
+						if (opcode[3])
+							registers[`REG_A] <= rdata;
+						{registers[`REG_H],registers[`REG_L]} <=
+							opcode[4] ? // if set, LDD, else LDI
+							({registers[`REG_H],registers[`REG_L]} - 1) :
+							({registers[`REG_H],registers[`REG_L]} + 1);
+					end
+				endcase
+			end
+			`INSN_ALU8: begin
+				if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
+					/* Sit on our asses. */
+					cycle <= 1;
+				end else begin		/* Actually do the computation! */
+					case (opcode[5:3])
+					`INSN_alu_ADD: begin
+						registers[`REG_A] <=
+							registers[`REG_A] + tmp;
+						registers[`REG_F] <=
+							{ /* Z */ ((registers[`REG_A] + tmp) == 0) ? 1'b1 : 1'b0,
+							  /* N */ 1'b0,
+							  /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
+							  /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
+							  registers[`REG_F][3:0]
+							};
+					end
+					`INSN_alu_ADC: begin
+						registers[`REG_A] <=
+							registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]};
+						registers[`REG_F] <=
+							{ /* Z */ ((registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]}) == 0) ? 1'b1 : 1'b0,
+							  /* N */ 1'b0,
+							  /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]}) >> 4 == 1) ? 1'b1 : 1'b0,
+							  /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp} + {8'b0,registers[`REG_F][4]}) >> 8 == 1) ? 1'b1 : 1'b0,
+							  registers[`REG_F][3:0]
+							};
+					end
+					`INSN_alu_AND: begin
+						registers[`REG_A] <=
+							registers[`REG_A] & tmp;
+						registers[`REG_F] <=
+							{ /* Z */ ((registers[`REG_A] & tmp) == 0) ? 1'b1 : 1'b0,
+							  3'b010,
+							  registers[`REG_F][3:0]
+							};
+					end
+					`INSN_alu_OR: begin
+						registers[`REG_A] <=
+							registers[`REG_A] | tmp;
+						registers[`REG_F] <=
+							{ /* Z */ ((registers[`REG_A] | tmp) == 0) ? 1'b1 : 1'b0,
+							  3'b000,
+							  registers[`REG_F][3:0]
+							};
+					end
+					`INSN_alu_XOR: begin
+						registers[`REG_A] <=
+							registers[`REG_A] ^ tmp;
+						registers[`REG_F] <=
+							{ /* Z */ ((registers[`REG_A] ^ tmp) == 0) ? 1'b1 : 1'b0,
+							  3'b000,
+							  registers[`REG_F][3:0]
+							};
+					end
+					default:
+						$stop;
+					endcase
+				end
+			end
+			`INSN_NOP: begin /* NOP! */ end
+			`INSN_RST: begin
+				case (cycle)
+				0:	cycle <= 1;
+				1:	cycle <= 2;
+				2:	cycle <= 3;
+				3:	begin
+						cycle <= 0;
+						{registers[`REG_SPH],registers[`REG_SPL]} <=
+							{registers[`REG_SPH],registers[`REG_SPL]}-2;
+					end
+				endcase
+			end
+			`INSN_RET: begin
+				case (cycle)
+				0:	cycle <= 1;
+				1:	begin
+						cycle <= 2;
+						registers[`REG_PCL] <= rdata;
+					end
+				2:	begin
+						cycle <= 3;
+						registers[`REG_PCH] <= rdata;
+					end
+				3:	begin
+						cycle <= 0;
+						{registers[`REG_SPH],registers[`REG_SPL]} <=
+							{registers[`REG_SPH],registers[`REG_SPL]} + 2;
+						if (opcode[4])	/* RETI */
+							ie <= 1;
+					end
+				endcase
+			end
 			endcase
 			state <= `STATE_FETCH;
 		end