X-Git-Url: http://git.joshuawise.com/fpgaboy.git/blobdiff_plain/1eefdc8e89a69963b1c1a084fe4ecec844997293..refs/heads/master:/Uart.v

diff --git a/Uart.v b/Uart.v
index e521304..ab16d79 100644
--- a/Uart.v
+++ b/Uart.v
@@ -10,7 +10,8 @@ module UART(
 	input rd,
 	input [15:0] addr,
 	inout [7:0] data,
-	output reg serial = 1);
+	output reg serial = 1,
+	input serialrx);
 
 	wire data_decode = (addr == `DATA_ADDR);
 	wire stat_decode = (addr == `STAT_ADDR);
@@ -19,22 +20,27 @@ module UART(
 	
 	reg [7:0] tx_data = 0;
 	reg [15:0] tx_clkdiv = 0;
-	reg [3:0] tx_state = 4'b1011;	// 1011 is the not busy state.
-	wire tx_busy = tx_state != 4'b1011;
+	reg [3:0] tx_state = 4'b0000;
+	reg tx_busy = 0;
 	wire tx_newdata = (wr) && (!tx_busy) && data_decode;
 	
-	assign data = (rd && stat_latch) ? (tx_busy ? 8'b1 : 8'b0) :
-			(rd && data_latch) ? (8'b0) :
+	reg rx_hasdata = 0;
+	reg [15:0] rx_clkdiv = 0;
+	reg [3:0] rx_state = 4'b0000;
+	reg [7:0] rx_data, rx_data_tmp;
+	
+	assign data = (stat_latch) ? {6'b0, rx_hasdata, tx_busy} :
+			(data_latch) ? rx_data :
 			8'bzzzzzzzz;
 
 	always @(posedge clk)
 	begin
 		data_latch <= rd && data_decode;
 		stat_latch <= rd && stat_decode;
-		/* deal with diqing */
 		if(tx_newdata) begin
 			tx_data <= data;
 			tx_state <= 4'b0000;
+			tx_busy <= 1;
 		end else if (tx_clkdiv == 0) begin
 			tx_state <= tx_state + 1;
 			if (tx_busy)
@@ -49,14 +55,48 @@ module UART(
 				4'b0111: serial <= tx_data[6];
 				4'b1000: serial <= tx_data[7];
 				4'b1001: serial <= 1;
-				4'b1010: serial <= 1;
+				4'b1010: tx_busy <= 0;
 				default: $stop;
+				endcase
+		end
+		
+		if ((rx_state == 0) && (serialrx == 0) /*&& (rx_hasdata == 0)*/)		/* Kick off. */
+			rx_state <= 4'b0001;
+		else if ((rx_state != 4'b0000) && (rx_clkdiv == 0)) begin
+			if (rx_state != 4'b1010)
+				rx_state <= rx_state + 1;
+			else
+				rx_state <= 0;
+			case (rx_state)
+			4'b0001:	begin end /* Twiddle thumbs -- this is the end of the half bit. */
+			4'b0010:	rx_data_tmp[0] <= serialrx;
+			4'b0011:	rx_data_tmp[1] <= serialrx;
+			4'b0100:	rx_data_tmp[2] <= serialrx;
+			4'b0101:	rx_data_tmp[3] <= serialrx;
+			4'b0110:	rx_data_tmp[4] <= serialrx;
+			4'b0111:	rx_data_tmp[5] <= serialrx;
+			4'b1000:	rx_data_tmp[6] <= serialrx;
+			4'b1001:	rx_data_tmp[7] <= serialrx;
+			4'b1010:	if (serialrx == 1) begin
+						rx_data <= rx_data_tmp; /* Expect a 1 */
+						rx_hasdata <= 1;
+					end
 			endcase
 		end
+		
+		if (rd && data_decode)
+			rx_hasdata <= 0;
 
-		if((tx_newdata && !tx_busy) || (tx_clkdiv == `CLK_DIV))
+		if(tx_newdata || (tx_clkdiv == `CLK_DIV))
 			tx_clkdiv <= 0;
 		else
 			tx_clkdiv <= tx_clkdiv + 1;
+		
+		if ((rx_state == 0) && (serialrx == 0) /*&& (rx_hasdata == 0)*/)		/* Wait half a period before advancing. */
+			rx_clkdiv <= `CLK_DIV / 2 + `CLK_DIV / 4;
+		else if (rx_clkdiv == `CLK_DIV)
+			rx_clkdiv <= 0;
+		else
+			rx_clkdiv <= rx_clkdiv + 1;
 	end
 endmodule