Cut one at a framebuffer

[fpgaboy.git] / diag.asm

diff --git a/diag.asm b/diag.asm
index 28fce997faa6229368ced11d2339e3c536590264..e3afaa42e685f0dfbbb131de8069ca677b93913d 100644 (file)
--- a/diag.asm
+++ b/diag.asm
@@ -1,19 +1,34 @@
-       SECTION "a",HOME
+       section "end",HOME[1024]
+       nop
+
+       SECTION "a",HOME[$00]
+
+start: jp main
+       
+       section "vbl",HOME[$40]
+       jp vbl
+       
+       section "lcdc",HOME[$48]
+       jp lcdc
+       
+       section "tmro",HOME[$50]
+       jp tmro
 
 main:
-       ld c, $51       ; Note that we are alive.
        ld a, $FF
-       ld [c],a
-       
+       ld c, $51
+       ld [c], a
+
        ld sp, $DFF0
        
-       ld c, $07
        ld a, $04       ;start timer, 4.096KHz
+       ld c, $07
        ld [c], a
 
        ld hl, $DF81
        xor a
-       ld [hl], a
+       ld [hli], a
+       ld [hli], a
        
        ld hl, signon
        call puts
@@ -33,26 +48,41 @@ main:
 signon:
        db $0D,$0A,$1B,"[1mFPGABoy Diagnostic ROM",$1B,"[0m",$0D,$0A,0
 
-       section "fuq",HOME[$100]
-irqhand:
+vbl:
+lcdc:
+       PUSH AF
+       PUSH BC
+       
+       xor a
+       ld c, $0F
+       ld [c], a
+       
+       POP BC
+       POP AF
+       
+       reti
+       
+tmro:
        PUSH AF
        PUSH BC
        PUSH DE
        PUSH HL
        
        xor a
-       ld c, $0F       ; ack the irq
+       ld c, $0F
        ld [c], a
        
+       ld hl, $DF82
+       ld a, [hld]
+       cp 0
+       jr z, .noprint
        ld a, $41       ; print A
        call putc
-       
-       ld hl, $DF81
+.noprint:
+       inc [hl]
        ld a, [hl]
-       add 1
        ld c, $51
        ld [c], a
-       ld [hl], a
 
        POP HL
        POP DE
@@ -138,6 +168,10 @@ puthex:                            ; Put two hex nibbles to the serial console.
 waitsw:
        ld hl,waitswstr
        call puts
+       
+       ld hl,$DF82
+       ld a, 1
+       ld [hl], a
 
        ld c, $51
        xor a
@@ -227,11 +261,37 @@ insntest:
        cpl
        cp $AA
        jr nz,.fail
+
+       ; Test DI/EI delay
+       di
+       ld hl, .dinocausefail
+       ld c, $0F       ; First, wait until an interrupt happens...
+.wait: ld a, [c]
+       and $04
+       cp 0
+       jr z, .wait
+       ei              ; Now make sure that an IRQ didn't happen on EI/DI
+       di
+       ld a, [c]
+       and $04
+       cp 0
+       jr z, .fail
+       ld hl, .dicausefail
+       ei              ; Make sure that an IRQ does happen on EI/NOP/DI
+       nop
+       nop
+       di
+       ld a, [c]
+       and $04
+       cp 0
+       jr nz, .fail
+       ei
        
        ld hl, .ok
        call puts
        ret
 .fail:
+       ei
        call puts
        ld hl, .testfailed
        call puts
@@ -254,6 +314,10 @@ insntest:
        db "CPL",0
 .inc16fail:
        db "INC16",0
+.dinocausefail:
+       db "DI/EI does not cause interrupt",0
+.dicausefail:
+       db "DI/NOP/EI cause interrupt",0
 .testfailed:
        db " test failed.",$0D,$0A,0
 .ok:
@@ -277,3 +341,4 @@ puts:
        ret z
        call putc
        jr puts
+