]> Joshua Wise's Git repositories - fpgaboy.git/blobdiff - GBZ80Core.v
Start refactoring instructions.
[fpgaboy.git] / GBZ80Core.v
index 3cd46e3b1cec513536674259e0045391975673d7..b53a6e20ec07a736baa0452c971e2d060c5ea8e2 100644 (file)
 `define INSN_JP_HL                     8'b11101001
 `define INSN_JR_imm                    8'b00011000
 `define INSN_JRCC_imm          8'b001xx000
+`define INSN_INCDEC16          8'b00xxx011
+`define INSN_VOP_INTR          8'b11111100     // 0xFC is grabbed by the fetch if there is an interrupt pending.
+`define INSN_DI                                8'b11110011
+`define INSN_EI                                8'b11111011
 
 `define INSN_cc_NZ                     2'b00
 `define INSN_cc_Z                              2'b01
 
 module GBZ80Core(
        input clk,
-       output reg [15:0] busaddress,   /* BUS_* is latched on STATE_FETCH. */
+       output reg [15:0] busaddress = 0,       /* BUS_* is latched on STATE_FETCH. */
        inout [7:0] busdata,
-       output reg buswr, output reg busrd);
+       output reg buswr = 0, output reg busrd = 0,
+       input irq, input [7:0] jaddr);
        
-       reg [1:0] state = 0;                                    /* State within this bus cycle (see STATE_*). */
-       reg [2:0] cycle = 0;                                    /* Cycle for instructions. */
+       reg [1:0] state;                                        /* State within this bus cycle (see STATE_*). */
+       reg [2:0] cycle;                                        /* Cycle for instructions. */
        
        reg [7:0] registers[11:0];
        
@@ -100,14 +105,14 @@ module GBZ80Core(
        reg [7:0] opcode;                               /* Opcode from the current machine cycle. */
        
        reg [7:0] rdata, wdata;         /* Read data from this bus cycle, or write data for the next. */
-       reg rd = 1, wr = 0, newcycle = 1;
+       reg rd, wr, newcycle;
        
        reg [7:0] tmp, tmp2;                    /* Generic temporary regs. */
        
        reg [7:0] buswdata;
        assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
        
-       reg ie = 0;
+       reg ie = 0, iedelay = 0;
        
        initial begin
                registers[ 0] <= 0;
@@ -122,12 +127,19 @@ module GBZ80Core(
                registers[ 9] <= 0;
                registers[10] <= 0;
                registers[11] <= 0;
-               ie <= 0;
                rd <= 1;
                wr <= 0;
                newcycle <= 1;
                state <= 0;
                cycle <= 0;
+               busrd <= 0;
+               buswr <= 0;
+               busaddress <= 0;
+               ie <= 0;
+               iedelay <= 0;
+               opcode <= 0;
+               state <= `STATE_WRITEBACK;
+               cycle <= 0;
        end
 
        always @(posedge clk)
@@ -148,7 +160,10 @@ module GBZ80Core(
                end
                `STATE_DECODE: begin
                        if (newcycle) begin
-                               opcode <= busdata;
+                               if (ie && irq)
+                                       opcode <= `INSN_VOP_INTR;
+                               else
+                                       opcode <= busdata;
                                rdata <= busdata;
                                newcycle <= 0;
                                cycle <= 0;
@@ -156,6 +171,10 @@ module GBZ80Core(
                                if (rd) rdata <= busdata;
                                cycle <= cycle + 1;
                        end
+                       if (iedelay) begin
+                               ie <= 1;
+                               iedelay <= 0;
+                       end
                        buswr <= 0;
                        busrd <= 0;
                        wr <= 0;
@@ -172,151 +191,9 @@ module GBZ80Core(
 `define EXEC_NEWCYCLE \
        newcycle <= 1; rd <= 1; wr <= 0
                        casex (opcode)
-                       `INSN_LD_reg_imm8: begin
-                               case (cycle)
-                               0:      begin
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               `EXEC_INC_PC;
-                                               if (opcode[5:3] == `INSN_reg_dHL) begin
-                                                       address <= {registers[`REG_H], registers[`REG_L]};
-                                                       wdata <= rdata;
-                                                       rd <= 0;
-                                                       wr <= 1;
-                                               end else begin
-                                                       `EXEC_NEWCYCLE;
-                                               end
-                                       end
-                               2:      begin
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_HALT: begin
-                               `EXEC_NEWCYCLE;
-                               /* XXX Interrupts needed for HALT. */
-                       end
-                       `INSN_LD_HL_reg: begin
-                               case (cycle)
-                               0:      begin
-                                               case (opcode[2:0])
-                                               `INSN_reg_A:    wdata <= registers[`REG_A];
-                                               `INSN_reg_B:    wdata <= registers[`REG_B];
-                                               `INSN_reg_C:    wdata <= registers[`REG_C];
-                                               `INSN_reg_D:    wdata <= registers[`REG_D];
-                                               `INSN_reg_E:    wdata <= registers[`REG_E];
-                                               `INSN_reg_H:    wdata <= registers[`REG_H];
-                                               `INSN_reg_L:    wdata <= registers[`REG_L];
-                                               endcase
-                                               address <= {registers[`REG_H], registers[`REG_L]};
-                                               wr <= 1; rd <= 0;
-                                       end
-                               1:      begin
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_HL: begin
-                               case(cycle)
-                               0:      begin
-                                               address <= {registers[`REG_H], registers[`REG_L]};
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               tmp <= rdata;
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_reg: begin
-                               `EXEC_INC_PC;
-                               `EXEC_NEWCYCLE;
-                               case (opcode[2:0])
-                               `INSN_reg_A:    tmp <= registers[`REG_A];
-                               `INSN_reg_B:    tmp <= registers[`REG_B];
-                               `INSN_reg_C:    tmp <= registers[`REG_C];
-                               `INSN_reg_D:    tmp <= registers[`REG_D];
-                               `INSN_reg_E:    tmp <= registers[`REG_E];
-                               `INSN_reg_H:    tmp <= registers[`REG_H];
-                               `INSN_reg_L:    tmp <= registers[`REG_L];
-                               endcase
-                       end
-                       `INSN_LD_reg_imm16: begin
-                               `EXEC_INC_PC;
-                               case (cycle)
-                               0:      begin
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               2: begin `EXEC_NEWCYCLE; end
-                               endcase
-                       end
-                       `INSN_LD_SP_HL: begin
-                               case (cycle)
-                               0:      begin
-                                               tmp <= registers[`REG_H];
-                                       end
-                               1:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                               tmp <= registers[`REG_L];
-                                       end
-                               endcase
-                       end
-                       `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
-                               case (cycle)
-                               0:      begin
-                                               wr <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: wdata <= registers[`REG_A];
-                                               `INSN_stack_BC: wdata <= registers[`REG_B];
-                                               `INSN_stack_DE: wdata <= registers[`REG_D];
-                                               `INSN_stack_HL: wdata <= registers[`REG_H];
-                                               endcase
-                                       end
-                               1:      begin
-                                               wr <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: wdata <= registers[`REG_F];
-                                               `INSN_stack_BC: wdata <= registers[`REG_C];
-                                               `INSN_stack_DE: wdata <= registers[`REG_E];
-                                               `INSN_stack_HL: wdata <= registers[`REG_L];
-                                               endcase
-                                       end
-                               2:      begin /* Twiddle thumbs. */ end
-                               3:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
-                       `INSN_POP_reg: begin    /* POP is 12 cycles! */
-                               case (cycle)
-                               0:      begin
-                                               rd <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
-                                       end
-                               1:      begin
-                                               rd <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
-                                       end
-                               2:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
+                       `define EXECUTE
+                       `include "allinsns.v"
+                       `undef EXECUTE
                        `INSN_LDH_AC: begin
                                case (cycle)
                                0:      begin
@@ -408,8 +285,8 @@ module GBZ80Core(
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]};
                                        end
                                1:      begin   // SPECIAL CASE: cycle does NOT increase linearly with ret!
-                                               `EXEC_INC_PC;
-                                               case (opcode[4:3])      // cycle 1 is skipped if we are not retcc
+                                               `EXEC_INC_PC;   // cycle 1 is skipped if we are not retcc
+                                               case (opcode[4:3])
                                                `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
                                                `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
                                                `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
@@ -523,123 +400,69 @@ module GBZ80Core(
                                        end
                                endcase
                        end
-                       default:
-                               $stop;
-                       endcase
-                       state <= `STATE_WRITEBACK;
-               end
-               `STATE_WRITEBACK: begin
-                       casex (opcode)
-                       `INSN_LD_reg_imm8:
-                               case (cycle)
-                               0:      begin end
-                               1:      case (opcode[5:3])
-                                       `INSN_reg_A:    begin registers[`REG_A] <= rdata; end
-                                       `INSN_reg_B:    begin registers[`REG_B] <= rdata; end
-                                       `INSN_reg_C:    begin registers[`REG_C] <= rdata; end
-                                       `INSN_reg_D:    begin registers[`REG_D] <= rdata; end
-                                       `INSN_reg_E:    begin registers[`REG_E] <= rdata; end
-                                       `INSN_reg_H:    begin registers[`REG_H] <= rdata; end
-                                       `INSN_reg_L:    begin registers[`REG_L] <= rdata; end
-                                       `INSN_reg_dHL:  begin /* Go off to cycle 2 */ end
-                                       endcase
-                               2:      begin end
-                               endcase
-                       `INSN_HALT: begin
-                               /* Nothing needs happen here. */
-                               /* XXX Interrupts needed for HALT. */
-                       end
-                       `INSN_LD_HL_reg: begin
-                               /* Nothing of interest here */
-                       end
-                       `INSN_LD_reg_HL: begin
+                       `INSN_INCDEC16: begin
                                case (cycle)
-                               0:      begin end
-                               1:      begin
-                                               case (opcode[5:3])
-                                               `INSN_reg_A:    registers[`REG_A] <= tmp;
-                                               `INSN_reg_B:    registers[`REG_B] <= tmp;
-                                               `INSN_reg_C:    registers[`REG_C] <= tmp;
-                                               `INSN_reg_D:    registers[`REG_D] <= tmp;
-                                               `INSN_reg_E:    registers[`REG_E] <= tmp;
-                                               `INSN_reg_H:    registers[`REG_H] <= tmp;
-                                               `INSN_reg_L:    registers[`REG_L] <= tmp;
-                                               endcase
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_reg: begin
-                               case (opcode[5:3])
-                               `INSN_reg_A:    registers[`REG_A] <= tmp;
-                               `INSN_reg_B:    registers[`REG_B] <= tmp;
-                               `INSN_reg_C:    registers[`REG_C] <= tmp;
-                               `INSN_reg_D:    registers[`REG_D] <= tmp;
-                               `INSN_reg_E:    registers[`REG_E] <= tmp;
-                               `INSN_reg_H:    registers[`REG_H] <= tmp;
-                               `INSN_reg_L:    registers[`REG_L] <= tmp;
-                               endcase
-                       end
-                       `INSN_LD_reg_imm16: begin
-                               case (cycle)
-                               0:      begin /* */ end
-                               1:      begin
+                               0: begin
                                                case (opcode[5:4])
-                                               `INSN_reg16_BC: registers[`REG_C] <= rdata;
-                                               `INSN_reg16_DE: registers[`REG_E] <= rdata;
-                                               `INSN_reg16_HL: registers[`REG_L] <= rdata;
-                                               `INSN_reg16_SP: registers[`REG_SPL] <= rdata;
+                                               `INSN_reg16_BC: begin
+                                                       tmp <= registers[`REG_B];
+                                                       tmp2 <= registers[`REG_C];
+                                               end
+                                               `INSN_reg16_DE: begin
+                                                       tmp <= registers[`REG_D];
+                                                       tmp2 <= registers[`REG_E];
+                                               end
+                                               `INSN_reg16_HL: begin
+                                                       tmp <= registers[`REG_H];
+                                                       tmp2 <= registers[`REG_L];
+                                               end
+                                               `INSN_reg16_SP: begin
+                                                       tmp <= registers[`REG_SPH];
+                                                       tmp2 <= registers[`REG_SPL];
+                                               end
                                                endcase
                                        end
-                               2: begin
-                                               case (opcode[5:4])
-                                               `INSN_reg16_BC: registers[`REG_B] <= rdata;
-                                               `INSN_reg16_DE: registers[`REG_D] <= rdata;
-                                               `INSN_reg16_HL: registers[`REG_H] <= rdata;
-                                               `INSN_reg16_SP: registers[`REG_SPH] <= rdata;
-                                               endcase
+                               1: begin
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEWCYCLE;
                                        end
                                endcase
                        end
-                       `INSN_LD_SP_HL: begin
-                               case (cycle)
-                               0:      registers[`REG_SPH] <= tmp;
-                               1: registers[`REG_SPL] <= tmp;
-                               endcase
-                       end
-                       `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
-                               case (cycle)
-                               0:      {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                               {registers[`REG_SPH],registers[`REG_SPL]} - 1;
-                               1:      {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                               {registers[`REG_SPH],registers[`REG_SPL]} - 1;
-                               2:      begin /* type F */ end
-                               3:      begin /* type F */ end
-                               endcase
-                       end
-                       `INSN_POP_reg: begin    /* POP is 12 cycles! */
+                       `INSN_VOP_INTR: begin
                                case (cycle)
-                               0:      {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                               {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+                               0:      begin
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
+                                               wdata <= registers[`REG_PCH];
+                                               wr <= 1;
+                                       end
                                1:      begin
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: registers[`REG_F] <= rdata;
-                                               `INSN_stack_BC: registers[`REG_C] <= rdata;
-                                               `INSN_stack_DE: registers[`REG_E] <= rdata;
-                                               `INSN_stack_HL: registers[`REG_L] <= rdata;
-                                               endcase
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+                                               wdata <= registers[`REG_PCL];
+                                               wr <= 1;
                                        end
                                2:      begin
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: registers[`REG_A] <= rdata;
-                                               `INSN_stack_BC: registers[`REG_B] <= rdata;
-                                               `INSN_stack_DE: registers[`REG_D] <= rdata;
-                                               `INSN_stack_HL: registers[`REG_H] <= rdata;
-                                               endcase
+                                               `EXEC_NEWCYCLE;
                                        end
                                endcase
                        end
+                       `INSN_DI: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
+                       `INSN_EI: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
+                       default:
+                               $stop;
+                       endcase
+                       state <= `STATE_WRITEBACK;
+               end
+               `STATE_WRITEBACK: begin
+                       casex (opcode)
+                       `define WRITEBACK
+                       `include "allinsns.v"
+                       `undef WRITEBACK
                        `INSN_LDH_AC: begin
                                case (cycle)
                                0:      begin /* Type F */ end
@@ -773,7 +596,7 @@ module GBZ80Core(
                                        registers[`REG_F] <= {registers[`REG_F][7],1'b1,1'b1,registers[`REG_F][4:0]};
                                end
                                `INSN_alu_SCF: begin
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],1,registers[`REG_F][3:0]};
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],1'b1,registers[`REG_F][3:0]};
                                end
                                `INSN_alu_CCF: begin
                                        registers[`REG_F] <= {registers[`REG_F][7:5],~registers[`REG_F][4],registers[`REG_F][3:0]};
@@ -800,7 +623,7 @@ module GBZ80Core(
                                4:      begin
                                                {registers[`REG_SPH],registers[`REG_SPL]} <=
                                                        {registers[`REG_SPH],registers[`REG_SPL]} + 2;
-                                               if (opcode[4] && (opcode != `INSN_RETCC))       /* RETI */
+                                               if (opcode[4] && opcode[0])     /* RETI */
                                                        ie <= 1;
                                        end
                                endcase
@@ -841,6 +664,47 @@ module GBZ80Core(
                                                {tmp[7]?8'hFF:8'h00,tmp};
                                endcase
                        end
+                       `INSN_INCDEC16: begin
+                               case (cycle)
+                               0:      {tmp,tmp2} <= {tmp,tmp2} +
+                                               (opcode[3] ? 16'hFFFF : 16'h0001);
+                               1: begin
+                                               case (opcode[5:4])
+                                               `INSN_reg16_BC: begin
+                                                       registers[`REG_B] <= tmp;
+                                                       registers[`REG_C] <= tmp2;
+                                               end
+                                               `INSN_reg16_DE: begin
+                                                       registers[`REG_D] <= tmp;
+                                                       registers[`REG_E] <= tmp2;
+                                               end
+                                               `INSN_reg16_HL: begin
+                                                       registers[`REG_H] <= tmp;
+                                                       registers[`REG_L] <= tmp2;
+                                               end
+                                               `INSN_reg16_SP: begin
+                                                       registers[`REG_SPH] <= tmp;
+                                                       registers[`REG_SPL] <= tmp2;
+                                               end
+                                               endcase
+                                       end
+                               endcase
+                       end
+                       `INSN_VOP_INTR: begin
+                               case (cycle)
+                               0:      begin end
+                               1:      begin end
+                               2:      begin
+                                               ie <= 0;
+                                               {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                                       {8'b0,jaddr};
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+                                       end
+                               endcase
+                       end
+                       `INSN_DI: ie <= 0;
+                       `INSN_EI: iedelay <= 1;
                        default:
                                $stop;
                        endcase
This page took 0.043945 seconds and 4 git commands to generate.