ld c, $51 ; Note that we are alive.
ld a, $FF
ld [c],a
-
- ld sp, $DFFF
-
- ld hl, signon
- call puts
- call memtest
-
- call insntest
-
- call waitsw
-
- jr main
-
-signon:
- db $0D,$0A,$1B,"[1mFPGABoy Diagnostic ROM",$1B,"[0m",$0D,$0A,0
-
-; Memory tester: writes h ^ l to all addresses from C000 to DF80.
-memtest:
- ld hl,memteststr
- call puts
+ ld sp, $DFF0
- ld hl, $C000 ; Write loop
-.wr:
- ld a,h
- xor l
- ld [hli],a
- ld a, $DF
- cp h
- jr nz, .wr
+ ld hl, $DF81
ld a, $80
- cp l
- jr nz, .wr
-
- ld hl, $C000 ; Read loop
-.rd:
- ld a,h
- xor l
- ld b,a
- ld a, [hli]
- cp b
- jr nz, .memfail
+ ld [hl], a
+
+ ld c, $07
+ ld a, $04 ;start timer, 4.096KHz
+ ld [c], a
+;diqs: ei
+; ld a, $80
+; ld c, $51
+; ld [c], a
+; jr diqs
+ call irqhand
+ ei
+coqs: jr coqs
+
+ section "Diq", HOME[$38]
+fuqed:
+ di
+ jr fuqed
+
+ section "fuq",HOME[$100]
+irqhand:
+ PUSH AF
+ PUSH BC
+ PUSH DE
+ PUSH HL
- ld a, $DF
- cp h
- jr nz, .rd
- ld a, $80
- cp l
- jr nz, .rd
+ xor a
+ ld c, $0F ; ack the irq
+ ld [c], a
- ld hl, testokstr ; Say we're OK
- call puts
- ret
-.memfail: ; Say we failed (sadface)
- ; decrement hl the easy way
- ld a,[hld]
- push hl
- ld hl, failatstr
- call puts
- pop hl
- ld a, h
- call puthex
- ld a, l
- call puthex
- ld a, $0A
- call putc
- ld a, $0D
+ ld a, $41 ; print A
call putc
- ret
-memteststr:
- db "Testing memory from $C000 to $DF80...",0
-testokstr:
- db " OK!",$0D,$0A,0
-failatstr:
- db " Test failed at $",0
-
-puthex: ; Put two hex nibbles to the serial console.
- push af
- rra
- rra
- rra
- rra
- ld b,$0F
- and b
- ld b,$30
- add b
- call putc
- pop af
- ld b,$0F
- and b
- ld b,$30
- add b
- call putc
- ret
-
-; Wait for switches to be flipped on and off again.
-waitsw:
- ld hl,waitswstr
- call puts
-
- ld c, $51
- ld a, $00
- ld [c],a
+ ld hl, $DF81
+ inc [hl]
+ ld a, [hl]
ld c, $51
- ld b, $0
-.loop1:
- ld a,[c]
- cp b
- jr z,.loop1
-.loop2:
- ld a,[c]
- cp b
- jr nz,.loop2
- ret
+ ld [c], a
-waitswstr:
- db "Diagnostic ROM complete; flip switches to nonzero and then to zero to reset.",$0D,$0A,0
-
-; Core instruction basic acceptance tests.
-insntest:
- ld hl, .insnteststr
- call puts
-
- ; Test PUSH and POP.
- ld b, $12
- ld c, $34
- ld d, $56
- ld e, $78
- push bc
- pop de
- ld hl, .pushpopfail
- ld a, d
- cp b
- jr nz,.fail
- ld a, e
- cp c
- jr nz,.fail
-
- ; Test ALU (HL).
- ld hl, .ff
- ld a, $FF
- xor [hl]
- ld hl, .xorhlfail
- jr nz, .fail
-
- ; Test JP (HL)
- ld hl, .jphl
- jp [hl]
- ld hl, .jphlfail
- jr .fail
- rst $00
-.jphl:
- ; Test JR
- ld a, $FF
- ld b, $00
- cp b
- jr nz,.jr
- ld hl, .jrfail
- jr .fail
- rst $00
-.jr:
-
- ; Test CP.
- ld hl, .cpfail
- ld a, $10
- ld b, $20
- cp b
- jr nc,.fail
- ld a, $20
- ld b, $10
- cp b
- jr c,.fail
-
- ; Test CPL
- ld hl, .cplfail
- ld a, $55
- ld b, $AA
- cpl
- cp b
- jr nz,.fail
-
- ld hl, .ok
- call puts
- ret
-.fail:
- call puts
- ld hl, .testfailed
- call puts
- ret
-.insnteststr:
- db "Testing instructions... ",0
-.pushpopfail:
- db "PUSH/POP",0
-.ff:
- db $FF
-.xorhlfail:
- db "XOR [HL]",0
-.jphlfail:
- db "JP [HL]",0
-.jrfail:
- db "JR",0
-.cpfail:
- db "CP",0
-.cplfail:
- db "CPL",0
-.testfailed:
- db " test failed.",$0D,$0A,0
-.ok:
- db "OK!",$0D,$0A,0
+ POP HL
+ POP DE
+ POP BC
+ POP AF
+ RETI
+ db $18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE
+ db $18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE
+ db $18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE,$18,$FE
-; Serial port manipulation functions.
putc:
- push af
ld b, 0
ld c, $50
+ push af
.waitport:
ld a,[c]
cp b
pop af
ld [c],a
ret
-
-puts:
- ld a, [hli]
- ld b, $00
- cp b
- ret z
- call putc
- jr puts
git.joshuawise.com / fpgaboy.git / blobdiff