]> Joshua Wise's Git repositories - fpgaboy.git/blobdiff - GBZ80Core.v
Start refactoring instructions.
[fpgaboy.git] / GBZ80Core.v
index cb231c2cfbc09eb684c6ae713416b6f3c63d230e..b53a6e20ec07a736baa0452c971e2d060c5ea8e2 100644 (file)
 `define INSN_NOP                               8'b00000000
 `define INSN_RST                               8'b11xxx111
 `define INSN_RET                               8'b110x1001     // 1 = RETI, 0 = RET
+`define INSN_RETCC                     8'b110xx000
 `define INSN_CALL                              8'b11001101
+`define INSN_CALLCC                    8'b110xx100     // Not that call/cc.
+`define INSN_JP_imm                    8'b11000011
+`define INSN_JPCC_imm          8'b110xx010
+`define INSN_ALU_A             8'b00xxx111
+`define INSN_JP_HL                     8'b11101001
+`define INSN_JR_imm                    8'b00011000
+`define INSN_JRCC_imm          8'b001xx000
+`define INSN_INCDEC16          8'b00xxx011
+`define INSN_VOP_INTR          8'b11111100     // 0xFC is grabbed by the fetch if there is an interrupt pending.
+`define INSN_DI                                8'b11110011
+`define INSN_EI                                8'b11111011
+
+`define INSN_cc_NZ                     2'b00
+`define INSN_cc_Z                              2'b01
+`define INSN_cc_NC                     2'b10
+`define INSN_cc_C                              2'b11
 
 `define INSN_reg_A             3'b111
 `define INSN_reg_B             3'b000
 `define INSN_alu_XOR           3'b101
 `define INSN_alu_OR            3'b110
 `define INSN_alu_CP            3'b111          // Oh lawd, is dat some CP?
+`define INSN_alu_RLCA          3'b000
+`define INSN_alu_RRCA          3'b001
+`define INSN_alu_RLA           3'b010
+`define INSN_alu_RRA           3'b011
+`define INSN_alu_DAA           3'b100
+`define INSN_alu_CPL           3'b101
+`define INSN_alu_SCF           3'b110
+`define INSN_alu_CCF           3'b111
 
 module GBZ80Core(
        input clk,
-       output reg [15:0] busaddress,   /* BUS_* is latched on STATE_FETCH. */
+       output reg [15:0] busaddress = 0,       /* BUS_* is latched on STATE_FETCH. */
        inout [7:0] busdata,
-       output reg buswr, output reg busrd);
+       output reg buswr = 0, output reg busrd = 0,
+       input irq, input [7:0] jaddr);
        
-       reg [1:0] state = 0;                                    /* State within this bus cycle (see STATE_*). */
-       reg [2:0] cycle = 0;                                    /* Cycle for instructions. */
+       reg [1:0] state;                                        /* State within this bus cycle (see STATE_*). */
+       reg [2:0] cycle;                                        /* Cycle for instructions. */
        
        reg [7:0] registers[11:0];
        
@@ -79,14 +105,14 @@ module GBZ80Core(
        reg [7:0] opcode;                               /* Opcode from the current machine cycle. */
        
        reg [7:0] rdata, wdata;         /* Read data from this bus cycle, or write data for the next. */
-       reg rd = 1, wr = 0, newcycle = 1;
+       reg rd, wr, newcycle;
        
        reg [7:0] tmp, tmp2;                    /* Generic temporary regs. */
        
        reg [7:0] buswdata;
        assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
        
-       reg ie = 0;
+       reg ie = 0, iedelay = 0;
        
        initial begin
                registers[ 0] <= 0;
@@ -101,29 +127,54 @@ module GBZ80Core(
                registers[ 9] <= 0;
                registers[10] <= 0;
                registers[11] <= 0;
+               rd <= 1;
+               wr <= 0;
+               newcycle <= 1;
+               state <= 0;
+               cycle <= 0;
+               busrd <= 0;
+               buswr <= 0;
+               busaddress <= 0;
+               ie <= 0;
+               iedelay <= 0;
+               opcode <= 0;
+               state <= `STATE_WRITEBACK;
+               cycle <= 0;
        end
 
        always @(posedge clk)
                case (state)
                `STATE_FETCH: begin
-                       if (wr)
-                               buswdata <= wdata;
-                       if (newcycle)
+                       if (newcycle) begin
                                busaddress <= {registers[`REG_PCH], registers[`REG_PCL]};
-                       else
+                               buswr <= 0;
+                               busrd <= 1;
+                       end else begin
                                busaddress <= address;
-                       buswr <= wr;
-                       busrd <= rd;
+                               buswr <= wr;
+                               busrd <= rd;
+                               if (wr)
+                                       buswdata <= wdata;
+                       end
                        state <= `STATE_DECODE;
                end
                `STATE_DECODE: begin
                        if (newcycle) begin
-                               opcode <= busdata;
+                               if (ie && irq)
+                                       opcode <= `INSN_VOP_INTR;
+                               else
+                                       opcode <= busdata;
                                rdata <= busdata;
                                newcycle <= 0;
                                cycle <= 0;
-                       end else
+                       end else begin
                                if (rd) rdata <= busdata;
+                               cycle <= cycle + 1;
+                       end
+                       if (iedelay) begin
+                               ie <= 1;
+                               iedelay <= 0;
+                       end
                        buswr <= 0;
                        busrd <= 0;
                        wr <= 0;
@@ -140,151 +191,9 @@ module GBZ80Core(
 `define EXEC_NEWCYCLE \
        newcycle <= 1; rd <= 1; wr <= 0
                        casex (opcode)
-                       `INSN_LD_reg_imm8: begin
-                               case (cycle)
-                               0:      begin
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               `EXEC_INC_PC;
-                                               if (opcode[5:3] == `INSN_reg_dHL) begin
-                                                       address <= {registers[`REG_H], registers[`REG_L]};
-                                                       wdata <= rdata;
-                                                       rd <= 0;
-                                                       wr <= 1;
-                                               end else begin
-                                                       `EXEC_NEWCYCLE;
-                                               end
-                                       end
-                               2:      begin
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_HALT: begin
-                               `EXEC_NEWCYCLE;
-                               /* XXX Interrupts needed for HALT. */
-                       end
-                       `INSN_LD_HL_reg: begin
-                               case (cycle)
-                               0:      begin
-                                               case (opcode[2:0])
-                                               `INSN_reg_A:    wdata <= registers[`REG_A];
-                                               `INSN_reg_B:    wdata <= registers[`REG_B];
-                                               `INSN_reg_C:    wdata <= registers[`REG_C];
-                                               `INSN_reg_D:    wdata <= registers[`REG_D];
-                                               `INSN_reg_E:    wdata <= registers[`REG_E];
-                                               `INSN_reg_H:    wdata <= registers[`REG_H];
-                                               `INSN_reg_L:    wdata <= registers[`REG_L];
-                                               endcase
-                                               address <= {registers[`REG_H], registers[`REG_L]};
-                                               wr <= 1; rd <= 0;
-                                       end
-                               1:      begin
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_HL: begin
-                               case(cycle)
-                               0:      begin
-                                               address <= {registers[`REG_H], registers[`REG_L]};
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               tmp <= rdata;
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_reg: begin
-                               `EXEC_INC_PC;
-                               `EXEC_NEWCYCLE;
-                               case (opcode[2:0])
-                               `INSN_reg_A:    tmp <= registers[`REG_A];
-                               `INSN_reg_B:    tmp <= registers[`REG_B];
-                               `INSN_reg_C:    tmp <= registers[`REG_C];
-                               `INSN_reg_D:    tmp <= registers[`REG_D];
-                               `INSN_reg_E:    tmp <= registers[`REG_E];
-                               `INSN_reg_H:    tmp <= registers[`REG_H];
-                               `INSN_reg_L:    tmp <= registers[`REG_L];
-                               endcase
-                       end
-                       `INSN_LD_reg_imm16: begin
-                               `EXEC_INC_PC;
-                               case (cycle)
-                               0:      begin
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               2: begin `EXEC_NEWCYCLE; end
-                               endcase
-                       end
-                       `INSN_LD_SP_HL: begin
-                               case (cycle)
-                               0:      begin
-                                               tmp <= registers[`REG_H];
-                                       end
-                               1:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                               tmp <= registers[`REG_L];
-                                       end
-                               endcase
-                       end
-                       `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
-                               case (cycle)
-                               0:      begin
-                                               wr <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: wdata <= registers[`REG_A];
-                                               `INSN_stack_BC: wdata <= registers[`REG_B];
-                                               `INSN_stack_DE: wdata <= registers[`REG_D];
-                                               `INSN_stack_HL: wdata <= registers[`REG_H];
-                                               endcase
-                                       end
-                               1:      begin
-                                               wr <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: wdata <= registers[`REG_F];
-                                               `INSN_stack_BC: wdata <= registers[`REG_C];
-                                               `INSN_stack_DE: wdata <= registers[`REG_E];
-                                               `INSN_stack_HL: wdata <= registers[`REG_L];
-                                               endcase
-                                       end
-                               2:      begin /* TWIDDLE OUR FUCKING THUMBS! */ end
-                               3:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
-                       `INSN_POP_reg: begin    /* POP is 12 cycles! */
-                               case (cycle)
-                               0:      begin
-                                               rd <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
-                                       end
-                               1:      begin
-                                               rd <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
-                                       end
-                               2:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
+                       `define EXECUTE
+                       `include "allinsns.v"
+                       `undef EXECUTE
                        `INSN_LDH_AC: begin
                                case (cycle)
                                0:      begin
@@ -339,6 +248,10 @@ module GBZ80Core(
                                        endcase
                                end
                        end
+                       `INSN_ALU_A: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
                        `INSN_NOP: begin
                                `EXEC_NEWCYCLE;
                                `EXEC_INC_PC;
@@ -365,24 +278,35 @@ module GBZ80Core(
                                        end
                                endcase
                        end
-                       `INSN_RET: begin
+                       `INSN_RET,`INSN_RETCC: begin
                                case (cycle)
                                0:      begin
                                                rd <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]};
                                        end
-                               1:      begin
+                               1:      begin   // SPECIAL CASE: cycle does NOT increase linearly with ret!
+                                               `EXEC_INC_PC;   // cycle 1 is skipped if we are not retcc
+                                               case (opcode[4:3])
+                                               `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                               `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                               `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                               `INSN_cc_C:             if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                               endcase
+                                               rd <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
+                                       end
+                               2:      begin
                                                rd <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
                                        end
-                               2:      begin /* twiddle thumbs */ end
-                               3:      begin
+                               3:      begin /* twiddle thumbs */ end
+                               4:      begin
                                                `EXEC_NEWCYCLE;
                                                // do NOT increment PC!
                                        end
                                endcase
                        end
-                       `INSN_CALL: begin
+                       `INSN_CALL,`INSN_CALLCC: begin
                                case (cycle)
                                0:      begin
                                                `EXEC_INC_PC;
@@ -395,176 +319,161 @@ module GBZ80Core(
                                                rd <= 1;
                                        end
                                2:      begin
+                                               `EXEC_INC_PC;
+                                               if (!opcode[0]) // i.e., is callcc
+                                                       /* We need to check the condition code to bail out. */
+                                                       case (opcode[4:3])
+                                                       `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_C:             if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       endcase
+                                       end
+                               3:      begin
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
                                                wdata <= registers[`REG_PCH];
                                                wr <= 1;
                                        end
-                               3:      begin
+                               4:      begin
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
                                                wdata <= registers[`REG_PCL];
                                                wr <= 1;
                                        end
-                               4:      begin /* nothing happens on the bus next cycle! */ end
                                5:      begin
                                                `EXEC_NEWCYCLE; /* do NOT increment the PC */
                                        end
                                endcase
                        end
-                       default:
-                               $stop;
-                       endcase
-                       state <= `STATE_WRITEBACK;
-               end
-               `STATE_WRITEBACK: begin
-                       casex (opcode)
-                       `INSN_LD_reg_imm8:
-                               case (cycle)
-                               0:      cycle <= 1;
-                               1:      case (opcode[5:3])
-                                       `INSN_reg_A:    begin registers[`REG_A] <= rdata; cycle <= 0; end
-                                       `INSN_reg_B:    begin registers[`REG_B] <= rdata; cycle <= 0; end
-                                       `INSN_reg_C:    begin registers[`REG_C] <= rdata; cycle <= 0; end
-                                       `INSN_reg_D:    begin registers[`REG_D] <= rdata; cycle <= 0; end
-                                       `INSN_reg_E:    begin registers[`REG_E] <= rdata; cycle <= 0; end
-                                       `INSN_reg_H:    begin registers[`REG_H] <= rdata; cycle <= 0; end
-                                       `INSN_reg_L:    begin registers[`REG_L] <= rdata; cycle <= 0; end
-                                       `INSN_reg_dHL:  cycle <= 2;
-                                       endcase
-                               2:      cycle <= 0;
-                               endcase
-                       `INSN_HALT: begin
-                               /* Nothing needs happen here. */
-                               /* XXX Interrupts needed for HALT. */
-                       end
-                       `INSN_LD_HL_reg: begin
+                       `INSN_JP_imm,`INSN_JPCC_imm: begin
                                case (cycle)
-                               0:      cycle <= 1;
-                               1:      cycle <= 0;
-                               endcase
-                       end
-                       `INSN_LD_reg_HL: begin
-                               case (cycle)
-                               0:      cycle <= 1;
-                               1:      begin
-                                               case (opcode[5:3])
-                                               `INSN_reg_A:    registers[`REG_A] <= tmp;
-                                               `INSN_reg_B:    registers[`REG_B] <= tmp;
-                                               `INSN_reg_C:    registers[`REG_C] <= tmp;
-                                               `INSN_reg_D:    registers[`REG_D] <= tmp;
-                                               `INSN_reg_E:    registers[`REG_E] <= tmp;
-                                               `INSN_reg_H:    registers[`REG_H] <= tmp;
-                                               `INSN_reg_L:    registers[`REG_L] <= tmp;
-                                               endcase
-                                               cycle <= 0;
+                               0:      begin
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEXTADDR_PCINC;
+                                               rd <= 1;
                                        end
-                               endcase
-                       end
-                       `INSN_LD_reg_reg: begin
-                               case (opcode[5:3])
-                               `INSN_reg_A:    registers[`REG_A] <= tmp;
-                               `INSN_reg_B:    registers[`REG_B] <= tmp;
-                               `INSN_reg_C:    registers[`REG_C] <= tmp;
-                               `INSN_reg_D:    registers[`REG_D] <= tmp;
-                               `INSN_reg_E:    registers[`REG_E] <= tmp;
-                               `INSN_reg_H:    registers[`REG_H] <= tmp;
-                               `INSN_reg_L:    registers[`REG_L] <= tmp;
-                               endcase
-                       end
-                       `INSN_LD_reg_imm16: begin
-                               case (cycle)
-                               0:      cycle <= 1;
                                1:      begin
-                                               case (opcode[5:4])
-                                               `INSN_reg16_BC: registers[`REG_C] <= rdata;
-                                               `INSN_reg16_DE: registers[`REG_E] <= rdata;
-                                               `INSN_reg16_HL: registers[`REG_L] <= rdata;
-                                               `INSN_reg16_SP: registers[`REG_SPL] <= rdata;
-                                               endcase
-                                               cycle <= 2;
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEXTADDR_PCINC;
+                                               rd <= 1;
                                        end
-                               2: begin
-                                               case (opcode[5:4])
-                                               `INSN_reg16_BC: registers[`REG_B] <= rdata;
-                                               `INSN_reg16_DE: registers[`REG_D] <= rdata;
-                                               `INSN_reg16_HL: registers[`REG_H] <= rdata;
-                                               `INSN_reg16_SP: registers[`REG_SPH] <= rdata;
-                                               endcase
-                                               cycle <= 0;
+                               2:      begin
+                                               `EXEC_INC_PC;
+                                               if (!opcode[0]) begin   // i.e., JP cc,nn
+                                                       /* We need to check the condition code to bail out. */
+                                                       case (opcode[4:3])
+                                                       `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_C:             if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       endcase
+                                               end
+                                       end
+                               3:      begin
+                                               `EXEC_NEWCYCLE;
                                        end
                                endcase
                        end
-                       `INSN_LD_SP_HL: begin
+                       `INSN_JP_HL: begin
+                               `EXEC_NEWCYCLE;
+                       end
+                       `INSN_JR_imm,`INSN_JRCC_imm: begin
                                case (cycle)
-                               0: begin
-                                               cycle <= 1;
-                                               registers[`REG_SPH] <= tmp;
+                               0:      begin
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEXTADDR_PCINC;
+                                               rd <= 1;
                                        end
                                1: begin
-                                               cycle <= 0;
-                                               registers[`REG_SPL] <= tmp;
+                                               `EXEC_INC_PC;
+                                               if (opcode[5]) begin    // i.e., JP cc,nn
+                                                       /* We need to check the condition code to bail out. */
+                                                       case (opcode[4:3])
+                                                       `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_C:             if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       endcase
+                                               end
+                                       end
+                               2:      begin
+                                               `EXEC_NEWCYCLE;
                                        end
                                endcase
                        end
-                       `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
+                       `INSN_INCDEC16: begin
                                case (cycle)
                                0: begin
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]} - 1;
-                                               cycle <= 1;
+                                               case (opcode[5:4])
+                                               `INSN_reg16_BC: begin
+                                                       tmp <= registers[`REG_B];
+                                                       tmp2 <= registers[`REG_C];
+                                               end
+                                               `INSN_reg16_DE: begin
+                                                       tmp <= registers[`REG_D];
+                                                       tmp2 <= registers[`REG_E];
+                                               end
+                                               `INSN_reg16_HL: begin
+                                                       tmp <= registers[`REG_H];
+                                                       tmp2 <= registers[`REG_L];
+                                               end
+                                               `INSN_reg16_SP: begin
+                                                       tmp <= registers[`REG_SPH];
+                                                       tmp2 <= registers[`REG_SPL];
+                                               end
+                                               endcase
                                        end
-                               1:      begin
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]} - 1;
-                                               cycle <= 2;
+                               1: begin
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEWCYCLE;
                                        end
-                               2:      cycle <= 3;
-                               3:      cycle <= 0;
                                endcase
                        end
-                       `INSN_POP_reg: begin    /* POP is 12 cycles! */
+                       `INSN_VOP_INTR: begin
                                case (cycle)
                                0:      begin
-                                               cycle <= 1;
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
+                                               wdata <= registers[`REG_PCH];
+                                               wr <= 1;
                                        end
                                1:      begin
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: registers[`REG_F] <= rdata;
-                                               `INSN_stack_BC: registers[`REG_C] <= rdata;
-                                               `INSN_stack_DE: registers[`REG_E] <= rdata;
-                                               `INSN_stack_HL: registers[`REG_L] <= rdata;
-                                               endcase
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]} + 1;
-                                               cycle <= 2;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+                                               wdata <= registers[`REG_PCL];
+                                               wr <= 1;
                                        end
                                2:      begin
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: registers[`REG_A] <= rdata;
-                                               `INSN_stack_BC: registers[`REG_B] <= rdata;
-                                               `INSN_stack_DE: registers[`REG_D] <= rdata;
-                                               `INSN_stack_HL: registers[`REG_H] <= rdata;
-                                               endcase
-                                               cycle <= 0;
+                                               `EXEC_NEWCYCLE;
                                        end
                                endcase
                        end
+                       `INSN_DI: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
+                       `INSN_EI: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
+                       end
+                       default:
+                               $stop;
+                       endcase
+                       state <= `STATE_WRITEBACK;
+               end
+               `STATE_WRITEBACK: begin
+                       casex (opcode)
+                       `define WRITEBACK
+                       `include "allinsns.v"
+                       `undef WRITEBACK
                        `INSN_LDH_AC: begin
                                case (cycle)
-                               0:      cycle <= 1;
-                               1: begin
-                                               cycle <= 0;
-                                               if (opcode[4])
-                                                       registers[`REG_A] <= rdata;
-                                       end
+                               0:      begin /* Type F */ end
+                               1:      if (opcode[4])
+                                               registers[`REG_A] <= rdata;
                                endcase
                        end
                        `INSN_LDx_AHL: begin
                                case (cycle)
-                               0:      cycle <= 1;
+                               0:      begin /* Type F */ end
                                1:      begin
-                                               cycle <= 0;
                                                if (opcode[3])
                                                        registers[`REG_A] <= rdata;
                                                {registers[`REG_H],registers[`REG_L]} <=
@@ -577,7 +486,6 @@ module GBZ80Core(
                        `INSN_ALU8: begin
                                if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
                                        /* Sit on our asses. */
-                                       cycle <= 1;
                                end else begin          /* Actually do the computation! */
                                        case (opcode[5:3])
                                        `INSN_alu_ADD: begin
@@ -602,6 +510,28 @@ module GBZ80Core(
                                                          registers[`REG_F][3:0]
                                                        };
                                        end
+                                       `INSN_alu_SUB: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] - tmp;
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b1,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
+                                       `INSN_alu_SBC: begin
+                                               registers[`REG_A] <=
+                                                       registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]});
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]})) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b1,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} - ({1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]})) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} - ({1'b0,tmp} + {8'b0,registers[`REG_F][4]})) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
                                        `INSN_alu_AND: begin
                                                registers[`REG_A] <=
                                                        registers[`REG_A] & tmp;
@@ -629,70 +559,152 @@ module GBZ80Core(
                                                          registers[`REG_F][3:0]
                                                        };
                                        end
+                                       `INSN_alu_CP: begin
+                                               registers[`REG_F] <=
+                                                       { /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0,
+                                                         /* N */ 1'b1,
+                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
+                                                         /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
+                                                         registers[`REG_F][3:0]
+                                                       };
+                                       end
                                        default:
                                                $stop;
                                        endcase
                                end
                        end
+                       `INSN_ALU_A: begin
+                               case(opcode[5:3])
+                               `INSN_alu_RLCA: begin
+                                       registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_A][7]};
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]};
+                               end
+                               `INSN_alu_RRCA: begin
+                                       registers[`REG_A] <= {registers[`REG_A][0],registers[`REG_A][7:1]};
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]};
+                               end
+                               `INSN_alu_RLA: begin
+                                       registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_F][4]};
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]};
+                               end
+                               `INSN_alu_RRA: begin
+                                       registers[`REG_A] <= {registers[`REG_A][4],registers[`REG_A][7:1]};
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]};
+                               end
+                               `INSN_alu_CPL: begin
+                                       registers[`REG_A] <= ~registers[`REG_A];
+                                       registers[`REG_F] <= {registers[`REG_F][7],1'b1,1'b1,registers[`REG_F][4:0]};
+                               end
+                               `INSN_alu_SCF: begin
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],1'b1,registers[`REG_F][3:0]};
+                               end
+                               `INSN_alu_CCF: begin
+                                       registers[`REG_F] <= {registers[`REG_F][7:5],~registers[`REG_F][4],registers[`REG_F][3:0]};
+                               end
+                               endcase
+                       end
                        `INSN_NOP: begin /* NOP! */ end
                        `INSN_RST: begin
                                case (cycle)
-                               0:      cycle <= 1;
-                               1:      cycle <= 2;
-                               2:      cycle <= 3;
-                               3:      begin
-                                               cycle <= 0;
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]}-2;
-                                       end
+                               0:      begin /* type F */ end
+                               1:      begin /* type F */ end
+                               2:      begin /* type F */ end
+                               3:      {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                               {registers[`REG_SPH],registers[`REG_SPL]}-2;
                                endcase
                        end
-                       `INSN_RET: begin
+                       `INSN_RET,`INSN_RETCC: begin
                                case (cycle)
-                               0:      cycle <= 1;
-                               1:      begin
-                                               cycle <= 2;
-                                               registers[`REG_PCL] <= rdata;
-                                       end
-                               2:      begin
-                                               cycle <= 3;
-                                               registers[`REG_PCH] <= rdata;
-                                       end
-                               3:      begin
-                                               cycle <= 0;
+                               0:      if (opcode[0])  // i.e., not RETCC
+                                               cycle <= 1;     // Skip cycle 1; it gets incremented on the next round.
+                               1: begin /* Nothing need happen here. */ end
+                               2:      registers[`REG_PCL] <= rdata;
+                               3:      registers[`REG_PCH] <= rdata;
+                               4:      begin
                                                {registers[`REG_SPH],registers[`REG_SPL]} <=
                                                        {registers[`REG_SPH],registers[`REG_SPL]} + 2;
-                                               if (opcode[4])  /* RETI */
+                                               if (opcode[4] && opcode[0])     /* RETI */
                                                        ie <= 1;
                                        end
                                endcase
                        end
-                       `INSN_CALL: begin
+                       `INSN_CALL,`INSN_CALLCC: begin
                                case (cycle)
-                               0:      cycle <= 1;
-                               1:      begin
-                                               cycle <= 2;
-                                               tmp <= rdata;   // tmp contains newpcl
-                                       end
-                               2:      begin
-                                               cycle <= 3;
-                                               tmp2 <= rdata;  // tmp2 contains newpch
-                                       end
-                               3: begin
-                                               cycle <= 4;
-                                               registers[`REG_PCH] <= tmp2;
-                                       end
-                               4: begin
-                                               cycle <= 5;
+                               0:      begin /* type F */ end
+                               1:      tmp <= rdata;   // tmp contains newpcl
+                               2:      tmp2 <= rdata;  // tmp2 contains newpch
+                               3:      begin /* type F */ end
+                               4:      registers[`REG_PCH] <= tmp2;
+                               5: begin
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]} - 2;
                                                registers[`REG_PCL] <= tmp;
                                        end
-                               5: begin
+                               endcase
+                       end
+                       `INSN_JP_imm,`INSN_JPCC_imm: begin
+                               case (cycle)
+                               0:      begin /* type F */ end
+                               1:      tmp <= rdata;   // tmp contains newpcl
+                               2:      tmp2 <= rdata;  // tmp2 contains newpch
+                               3:      {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                               {tmp2,tmp};
+                               endcase
+                       end
+                       `INSN_JP_HL: begin
+                               {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                       {registers[`REG_H],registers[`REG_L]};
+                       end
+                       `INSN_JR_imm,`INSN_JRCC_imm: begin
+                               case (cycle)
+                               0:      begin /* type F */ end
+                               1:      tmp <= rdata;
+                               2: {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                               {registers[`REG_PCH],registers[`REG_PCL]} +
+                                               {tmp[7]?8'hFF:8'h00,tmp};
+                               endcase
+                       end
+                       `INSN_INCDEC16: begin
+                               case (cycle)
+                               0:      {tmp,tmp2} <= {tmp,tmp2} +
+                                               (opcode[3] ? 16'hFFFF : 16'h0001);
+                               1: begin
+                                               case (opcode[5:4])
+                                               `INSN_reg16_BC: begin
+                                                       registers[`REG_B] <= tmp;
+                                                       registers[`REG_C] <= tmp2;
+                                               end
+                                               `INSN_reg16_DE: begin
+                                                       registers[`REG_D] <= tmp;
+                                                       registers[`REG_E] <= tmp2;
+                                               end
+                                               `INSN_reg16_HL: begin
+                                                       registers[`REG_H] <= tmp;
+                                                       registers[`REG_L] <= tmp2;
+                                               end
+                                               `INSN_reg16_SP: begin
+                                                       registers[`REG_SPH] <= tmp;
+                                                       registers[`REG_SPL] <= tmp2;
+                                               end
+                                               endcase
+                                       end
+                               endcase
+                       end
+                       `INSN_VOP_INTR: begin
+                               case (cycle)
+                               0:      begin end
+                               1:      begin end
+                               2:      begin
+                                               ie <= 0;
+                                               {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                                       {8'b0,jaddr};
                                                {registers[`REG_SPH],registers[`REG_SPL]} <=
                                                        {registers[`REG_SPH],registers[`REG_SPL]} - 2;
-                                               cycle <= 0;
                                        end
                                endcase
                        end
+                       `INSN_DI: ie <= 0;
+                       `INSN_EI: iedelay <= 1;
                        default:
                                $stop;
                        endcase
@@ -700,72 +712,3 @@ module GBZ80Core(
                end
                endcase
 endmodule
-
-`timescale 1ns / 1ps
-module ROM(
-       input [15:0] address,
-       inout [7:0] data,
-       input wr, rd);
-
-       reg [7:0] rom [2047:0];
-       initial $readmemh("rom.hex", rom);
-
-       wire decode = address[15:13] == 0;
-       reg [7:0] odata;
-       wire idata = data;
-       assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
-       
-       always @(wr or rd)
-       begin
-               if (decode && rd)
-                       odata <= rom[address];
-       end
-endmodule
-
-module InternalRAM(
-       input [15:0] address,
-       inout [7:0] data,
-       input wr, rd);
-       
-       reg [7:0] ram [8191:0];
-       
-       wire decode = (address >= 16'hC000) && (address < 16'hFE00);
-       reg [7:0] odata;
-       wire idata = data;
-       assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
-       
-       always @(rd or wr)
-       begin
-               if (decode && rd)
-                       odata <= ram[address];
-               else if (decode && wr)
-                       ram[address] <= idata;
-       end
-endmodule
-
-module TestBench();
-       reg clk = 0;
-       wire [15:0] addr;
-       wire [7:0] data;
-       wire wr, rd;
-       
-       always #10 clk <= ~clk;
-       GBZ80Core core(
-               .clk(clk),
-               .busaddress(addr),
-               .busdata(data),
-               .buswr(wr),
-               .busrd(rd));
-       
-       ROM rom(
-               .address(addr),
-               .data(data),
-               .wr(wr),
-               .rd(rd));
-       
-       InternalRAM ram(
-               .address(addr),
-               .data(data),
-               .wr(wr),
-               .rd(rd));
-endmodule
This page took 0.052004 seconds and 4 git commands to generate.