It works, but why?

[fpgaboy.git] / System.v

diff --git a/System.v b/System.v
index 5d4fbedf2acadf14bd48a28dfb153570ed63a1cf..00ee4ecee5d67c006b0adc276aac752eede763ed 100644 (file)
--- a/System.v
+++ b/System.v
@@ -26,7 +26,6 @@ module InternalRAM(
        
        wire decode = address[15:13] == 3'b110;
        reg [7:0] odata;
-       wire idata = data;
        assign data = (rd && decode) ? odata : 8'bzzzzzzzz;
        
        always @(negedge clk)
@@ -72,6 +71,10 @@ module CoreTop(
        
        wire clk;       
        CPUDCM dcm (.CLKIN_IN(xtal), .CLKFX_OUT(clk));
+       
+       wire cclk;
+//     IBUFG ibuf (.O(cclk), .I(switches[0] & clk));
+       assign cclk = clk;
 
        wire [15:0] addr;       
        wire [7:0] data;
@@ -79,7 +82,8 @@ module CoreTop(
        
        wire irq, tmrirq;
        wire [7:0] jaddr;
-
+       wire [1:0] state;
+       
        GBZ80Core core(
                .clk(clk),
                .busaddress(addr),
@@ -87,7 +91,8 @@ module CoreTop(
                .buswr(wr),
                .busrd(rd),
                .irq(irq),
-               .jaddr(jaddr));
+               .jaddr(jaddr),
+               .state(state));
        
        ROM rom(
                .address(addr),
@@ -97,12 +102,16 @@ module CoreTop(
                .rd(rd));
        
        AddrMon amon(
-    .addr(addr), 
-    .clk(clk), 
-    .digit(digits), 
-    .out(seven),
-        .freeze(buttons[0])
-    );
+               .addr(addr), 
+               .clk(clk), 
+               .digit(digits), 
+               .out(seven),
+               .freeze(buttons[0]),
+               .periods(
+                       (state == 2'b00) ? 4'b0010 :
+                       (state == 2'b01) ? 4'b0001 :
+                       (state == 2'b10) ? 4'b1000 :
+                                          4'b0100) );
         
        Switches sw(
                .address(addr),
@@ -111,24 +120,25 @@ module CoreTop(
                .wr(wr),
                .rd(rd),
                .ledout(leds),
-               .switches(switches)
+               .switches({switches[7:1],1'b0})
                );
 
        UART nouart (   /* no u */
-    .clk(clk), 
-    .wr(wr), 
-    .rd(rd), 
-    .addr(addr), 
-    .data(data), 
-    .serial(serio)
-    );
+               .clk(clk), 
+               .wr(wr), 
+               .rd(rd), 
+               .addr(addr), 
+               .data(data), 
+               .serial(serio)
+               );
 
-  InternalRAM ram(
+       InternalRAM ram(
                .address(addr),
                .data(data),
                .clk(clk),
                .wr(wr),
-               .rd(rd));
+               .rd(rd)
+               );
 
        Timer tmr(
                .clk(clk),
@@ -136,7 +146,8 @@ module CoreTop(
                .rd(rd),
                .addr(addr),
                .data(data),
-               .irq(tmrirq));
+               .irq(tmrirq)
+               );
        
        Interrupt intr(
                .clk(clk),
@@ -165,7 +176,7 @@ module TestBench();
        wire [7:0] leds;
        wire [7:0] switches;
        
-       always #10 clk <= ~clk;
+       always #62 clk <= ~clk;
        GBZ80Core core(
                .clk(clk),
                .busaddress(addr),