Peripherals now have internal latches.

[fpgaboy.git] / LCDC.v

diff --git a/LCDC.v b/LCDC.v
index f951d3a15ba7ea5af16709d6d7dd8b3446397009..add6893e330a8e8574864ad054a67e06cbe9a92a 100644 (file)
--- a/LCDC.v
+++ b/LCDC.v
@@ -21,13 +21,17 @@ module LCDC(
        output wire lcdclk, lcdvs, lcdhs,
        output reg [2:0] lcdr, lcdg, output reg [1:0] lcdb);
        
+       /***** Bus latches *****/
+       reg rdlatch = 0;
+       reg [15:0] addrlatch = 0;
+       
        /***** Needed prototypes *****/
        wire [1:0] pixdata;
        
        /***** Internal clock that is stable and does not depend on CPU in single/double clock mode *****/
        reg clk4 = 0;
        always @(posedge clk)
-               clk4 = ~clk4;
+               clk4 <= ~clk4;
        
        /***** LCD control registers *****/
        reg [7:0] rLCDC = 8'h00;
@@ -88,7 +92,7 @@ module LCDC(
        assign lcdcirq = (rSTAT[3] & mode00irq) | (rSTAT[4] & mode01irq) | (rSTAT[5] & mode10irq) | (rSTAT[6] & lycirq);
        assign vblankirq = (posx == 0 && posy == 153);
        
-       always @(negedge clk4)
+       always @(posedge clk4)
        begin
                if (posx == 455) begin
                        posx <= 0;
@@ -155,13 +159,12 @@ module LCDC(
        wire [11:0] tileaddr_in = vraminuse ? tileaddr : addr[12:1];
        
        always @(posedge clk)
+       begin
                if ((vraminuse && ((posx == 2) || (vxpos[2:0] == 3'b111))) || decode_bgmap1) begin
                        tileno <= bgmap1[bgmapaddr_in];
                        if (wr && decode_bgmap1 && ~vraminuse)
                                bgmap1[bgmapaddr_in] <= data;
                end
-       
-       always @(posedge clk)
                if ((vraminuse && ((posx == 3) || (vxpos[2:0] == 3'b000))) || decode_tiledata) begin
                        tilehigh <= tiledatahigh[tileaddr_in];
                        tilelow <= tiledatalow[tileaddr_in];
@@ -170,28 +173,31 @@ module LCDC(
                        if (wr && ~addr[0] && decode_tiledata && ~vraminuse)
                                tiledatalow[tileaddr_in] <= data;
                end
+       end
   
        /***** Bus interface *****/
-       assign data = rd ?
-                       ((addr == `ADDR_LCDC) ? rLCDC :
-                        (addr == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
-                        (addr == `ADDR_SCY) ? rSCY :
-                        (addr == `ADDR_SCX) ? rSCX :
-                        (addr == `ADDR_LY) ? posy :
-                        (addr == `ADDR_LYC) ? rLYC :
-                        (addr == `ADDR_BGP) ? rBGP :
-                        (addr == `ADDR_OBP0) ? rOBP0 :
-                        (addr == `ADDR_OBP1) ? rOBP1 :
-                        (addr == `ADDR_WY) ? rWY :
-                        (addr == `ADDR_WX) ? rWX :
-                        (decode_tiledata && addr[0]) ? tilehigh :
-                        (decode_tiledata && ~addr[0]) ? tilelow :
+       assign data = rdlatch ?
+                       ((addrlatch == `ADDR_LCDC) ? rLCDC :
+                        (addrlatch == `ADDR_STAT) ? {rSTAT[7:3], (rLYC == posy) ? 1'b1 : 1'b0, mode} :
+                        (addrlatch == `ADDR_SCY) ? rSCY :
+                        (addrlatch == `ADDR_SCX) ? rSCX :
+                        (addrlatch == `ADDR_LY) ? posy :
+                        (addrlatch == `ADDR_LYC) ? rLYC :
+                        (addrlatch == `ADDR_BGP) ? rBGP :
+                        (addrlatch == `ADDR_OBP0) ? rOBP0 :
+                        (addrlatch == `ADDR_OBP1) ? rOBP1 :
+                        (addrlatch == `ADDR_WY) ? rWY :
+                        (addrlatch == `ADDR_WX) ? rWX :
+                        (decode_tiledata && addrlatch[0]) ? tilehigh :
+                        (decode_tiledata && ~addrlatch[0]) ? tilelow :
                         (decode_bgmap1) ? tileno :
                         8'bzzzzzzzz) :
                8'bzzzzzzzz;
   
        always @(posedge clk)
        begin
+               rdlatch <= rd;
+               addrlatch <= addr;
                if (wr)
                        case (addr)
                        `ADDR_LCDC:     rLCDC <= data;