First cut at timer

[fpgaboy.git] / GBZ80Core.v

diff --git a/GBZ80Core.v b/GBZ80Core.v
index 0697295dec07e734c6c2602fd403e00fccc3944a..96e4dcd38a164996df038dca0232ab82a837e90e 100644 (file)
--- a/GBZ80Core.v
+++ b/GBZ80Core.v
@@ -36,12 +36,16 @@
 `define INSN_NOP                               8'b00000000
 `define INSN_RST                               8'b11xxx111
 `define INSN_RET                               8'b110x1001     // 1 = RETI, 0 = RET
+`define INSN_RETCC                     8'b110xx000
 `define INSN_CALL                              8'b11001101
 `define INSN_CALLCC                    8'b110xx100     // Not that call/cc.
 `define INSN_JP_imm                    8'b11000011
 `define INSN_JPCC_imm          8'b110xx010
 `define INSN_ALU_A             8'b00xxx111
 `define INSN_JP_HL                     8'b11101001
+`define INSN_JR_imm                    8'b00011000
+`define INSN_JRCC_imm          8'b001xx000
+`define INSN_INCDEC16          8'b00xxx011
 
 `define INSN_cc_NZ                     2'b00
 `define INSN_cc_Z                              2'b01
@@ -398,18 +402,29 @@ module GBZ80Core(
                                        end
                                endcase
                        end
-                       `INSN_RET: begin
+                       `INSN_RET,`INSN_RETCC: begin
                                case (cycle)
                                0:      begin
                                                rd <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]};
                                        end
-                               1:      begin
+                               1:      begin   // SPECIAL CASE: cycle does NOT increase linearly with ret!
+                                               `EXEC_INC_PC;   // cycle 1 is skipped if we are not retcc
+                                               case (opcode[4:3])
+                                               `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                               `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                               `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                               `INSN_cc_C:             if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                               endcase
+                                               rd <= 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
+                                       end
+                               2:      begin
                                                rd <= 1;
                                                address <= {registers[`REG_SPH],registers[`REG_SPL]} + 1;
                                        end
-                               2:      begin /* twiddle thumbs */ end
-                               3:      begin
+                               3:      begin /* twiddle thumbs */ end
+                               4:      begin
                                                `EXEC_NEWCYCLE;
                                                // do NOT increment PC!
                                        end
@@ -485,6 +500,58 @@ module GBZ80Core(
                        `INSN_JP_HL: begin
                                `EXEC_NEWCYCLE;
                        end
+                       `INSN_JR_imm,`INSN_JRCC_imm: begin
+                               case (cycle)
+                               0:      begin
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEXTADDR_PCINC;
+                                               rd <= 1;
+                                       end
+                               1: begin
+                                               `EXEC_INC_PC;
+                                               if (opcode[5]) begin    // i.e., JP cc,nn
+                                                       /* We need to check the condition code to bail out. */
+                                                       case (opcode[4:3])
+                                                       `INSN_cc_NZ:    if (registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_Z:             if (~registers[`REG_F][7]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_NC:    if (registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       `INSN_cc_C:             if (~registers[`REG_F][4]) begin `EXEC_NEWCYCLE; end
+                                                       endcase
+                                               end
+                                       end
+                               2:      begin
+                                               `EXEC_NEWCYCLE;
+                                       end
+                               endcase
+                       end
+                       `INSN_INCDEC16: begin
+                               case (cycle)
+                               0: begin
+                                               case (opcode[5:4])
+                                               `INSN_reg16_BC: begin
+                                                       tmp <= registers[`REG_B];
+                                                       tmp2 <= registers[`REG_C];
+                                               end
+                                               `INSN_reg16_DE: begin
+                                                       tmp <= registers[`REG_D];
+                                                       tmp2 <= registers[`REG_E];
+                                               end
+                                               `INSN_reg16_HL: begin
+                                                       tmp <= registers[`REG_H];
+                                                       tmp2 <= registers[`REG_L];
+                                               end
+                                               `INSN_reg16_SP: begin
+                                                       tmp <= registers[`REG_SPH];
+                                                       tmp2 <= registers[`REG_SPL];
+                                               end
+                                               endcase
+                                       end
+                               1: begin
+                                               `EXEC_INC_PC;
+                                               `EXEC_NEWCYCLE;
+                                       end
+                               endcase
+                       end
                        default:
                                $stop;
                        endcase
@@ -752,15 +819,17 @@ module GBZ80Core(
                                                {registers[`REG_SPH],registers[`REG_SPL]}-2;
                                endcase
                        end
-                       `INSN_RET: begin
+                       `INSN_RET,`INSN_RETCC: begin
                                case (cycle)
-                               0:      begin /* type F */ end
-                               1:      registers[`REG_PCL] <= rdata;
-                               2:      registers[`REG_PCH] <= rdata;
-                               3:      begin
+                               0:      if (opcode[0])  // i.e., not RETCC
+                                               cycle <= 1;     // Skip cycle 1; it gets incremented on the next round.
+                               1: begin /* Nothing need happen here. */ end
+                               2:      registers[`REG_PCL] <= rdata;
+                               3:      registers[`REG_PCH] <= rdata;
+                               4:      begin
                                                {registers[`REG_SPH],registers[`REG_SPL]} <=
                                                        {registers[`REG_SPH],registers[`REG_SPL]} + 2;
-                                               if (opcode[4])  /* RETI */
+                                               if (opcode[4] && opcode[0])     /* RETI */
                                                        ie <= 1;
                                        end
                                endcase
@@ -792,6 +861,41 @@ module GBZ80Core(
                                {registers[`REG_PCH],registers[`REG_PCL]} <=
                                        {registers[`REG_H],registers[`REG_L]};
                        end
+                       `INSN_JR_imm,`INSN_JRCC_imm: begin
+                               case (cycle)
+                               0:      begin /* type F */ end
+                               1:      tmp <= rdata;
+                               2: {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                               {registers[`REG_PCH],registers[`REG_PCL]} +
+                                               {tmp[7]?8'hFF:8'h00,tmp};
+                               endcase
+                       end
+                       `INSN_INCDEC16: begin
+                               case (cycle)
+                               0:      {tmp,tmp2} <= {tmp,tmp2} +
+                                               (opcode[3] ? 16'hFFFF : 16'h0001);
+                               1: begin
+                                               case (opcode[5:4])
+                                               `INSN_reg16_BC: begin
+                                                       registers[`REG_B] <= tmp;
+                                                       registers[`REG_C] <= tmp2;
+                                               end
+                                               `INSN_reg16_DE: begin
+                                                       registers[`REG_D] <= tmp;
+                                                       registers[`REG_E] <= tmp2;
+                                               end
+                                               `INSN_reg16_HL: begin
+                                                       registers[`REG_H] <= tmp;
+                                                       registers[`REG_L] <= tmp2;
+                                               end
+                                               `INSN_reg16_SP: begin
+                                                       registers[`REG_SPH] <= tmp;
+                                                       registers[`REG_SPL] <= tmp2;
+                                               end
+                                               endcase
+                                       end
+                               endcase
+                       end
                        default:
                                $stop;
                        endcase