]> Joshua Wise's Git repositories - fpgaboy.git/blobdiff - GBZ80Core.v
Split out more insns
[fpgaboy.git] / GBZ80Core.v
index 095d9e85e555d592bcdcca33ae6f23bee3ca663d..f41805ac3c679aeebded8c8d2014f921fe8931c0 100644 (file)
@@ -46,6 +46,9 @@
 `define INSN_JR_imm                    8'b00011000
 `define INSN_JRCC_imm          8'b001xx000
 `define INSN_INCDEC16          8'b00xxx011
+`define INSN_VOP_INTR          8'b11111100     // 0xFC is grabbed by the fetch if there is an interrupt pending.
+`define INSN_DI                                8'b11110011
+`define INSN_EI                                8'b11111011
 
 `define INSN_cc_NZ                     2'b00
 `define INSN_cc_Z                              2'b01
 
 module GBZ80Core(
        input clk,
-       output reg [15:0] busaddress = 0,       /* BUS_* is latched on STATE_FETCH. */
+       output reg [15:0] busaddress,   /* BUS_* is latched on STATE_FETCH. */
        inout [7:0] busdata,
-       output reg buswr = 0, output reg busrd = 0);
+       output reg buswr, output reg busrd,
+       input irq, input [7:0] jaddr);
        
-       reg [1:0] state = 0;                                    /* State within this bus cycle (see STATE_*). */
-       reg [2:0] cycle = 0;                                    /* Cycle for instructions. */
+       reg [1:0] state;                                        /* State within this bus cycle (see STATE_*). */
+       reg [2:0] cycle;                                        /* Cycle for instructions. */
        
        reg [7:0] registers[11:0];
        
@@ -101,14 +105,14 @@ module GBZ80Core(
        reg [7:0] opcode;                               /* Opcode from the current machine cycle. */
        
        reg [7:0] rdata, wdata;         /* Read data from this bus cycle, or write data for the next. */
-       reg rd = 1, wr = 0, newcycle = 1;
+       reg rd, wr, newcycle;
        
        reg [7:0] tmp, tmp2;                    /* Generic temporary regs. */
        
        reg [7:0] buswdata;
        assign busdata = buswr ? buswdata : 8'bzzzzzzzz;
        
-       reg ie = 0;
+       reg ie, iedelay;
        
        initial begin
                registers[ 0] <= 0;
@@ -123,12 +127,19 @@ module GBZ80Core(
                registers[ 9] <= 0;
                registers[10] <= 0;
                registers[11] <= 0;
-               ie <= 0;
                rd <= 1;
                wr <= 0;
                newcycle <= 1;
                state <= 0;
                cycle <= 0;
+               busrd <= 0;
+               buswr <= 0;
+               busaddress <= 0;
+               ie <= 0;
+               iedelay <= 0;
+               opcode <= 0;
+               state <= `STATE_WRITEBACK;
+               cycle <= 0;
        end
 
        always @(posedge clk)
@@ -149,7 +160,10 @@ module GBZ80Core(
                end
                `STATE_DECODE: begin
                        if (newcycle) begin
-                               opcode <= busdata;
+                               if (ie && irq)
+                                       opcode <= `INSN_VOP_INTR;
+                               else
+                                       opcode <= busdata;
                                rdata <= busdata;
                                newcycle <= 0;
                                cycle <= 0;
@@ -157,6 +171,10 @@ module GBZ80Core(
                                if (rd) rdata <= busdata;
                                cycle <= cycle + 1;
                        end
+                       if (iedelay) begin
+                               ie <= 1;
+                               iedelay <= 0;
+                       end
                        buswr <= 0;
                        busrd <= 0;
                        wr <= 0;
@@ -173,213 +191,9 @@ module GBZ80Core(
 `define EXEC_NEWCYCLE \
        newcycle <= 1; rd <= 1; wr <= 0
                        casex (opcode)
-                       `INSN_LD_reg_imm8: begin
-                               case (cycle)
-                               0:      begin
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               `EXEC_INC_PC;
-                                               if (opcode[5:3] == `INSN_reg_dHL) begin
-                                                       address <= {registers[`REG_H], registers[`REG_L]};
-                                                       wdata <= rdata;
-                                                       rd <= 0;
-                                                       wr <= 1;
-                                               end else begin
-                                                       `EXEC_NEWCYCLE;
-                                               end
-                                       end
-                               2:      begin
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_HALT: begin
-                               `EXEC_NEWCYCLE;
-                               /* XXX Interrupts needed for HALT. */
-                       end
-                       `INSN_LD_HL_reg: begin
-                               case (cycle)
-                               0:      begin
-                                               case (opcode[2:0])
-                                               `INSN_reg_A:    wdata <= registers[`REG_A];
-                                               `INSN_reg_B:    wdata <= registers[`REG_B];
-                                               `INSN_reg_C:    wdata <= registers[`REG_C];
-                                               `INSN_reg_D:    wdata <= registers[`REG_D];
-                                               `INSN_reg_E:    wdata <= registers[`REG_E];
-                                               `INSN_reg_H:    wdata <= registers[`REG_H];
-                                               `INSN_reg_L:    wdata <= registers[`REG_L];
-                                               endcase
-                                               address <= {registers[`REG_H], registers[`REG_L]};
-                                               wr <= 1; rd <= 0;
-                                       end
-                               1:      begin
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_HL: begin
-                               case(cycle)
-                               0:      begin
-                                               address <= {registers[`REG_H], registers[`REG_L]};
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               tmp <= rdata;
-                                               `EXEC_INC_PC;
-                                               `EXEC_NEWCYCLE;
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_reg_reg: begin
-                               `EXEC_INC_PC;
-                               `EXEC_NEWCYCLE;
-                               case (opcode[2:0])
-                               `INSN_reg_A:    tmp <= registers[`REG_A];
-                               `INSN_reg_B:    tmp <= registers[`REG_B];
-                               `INSN_reg_C:    tmp <= registers[`REG_C];
-                               `INSN_reg_D:    tmp <= registers[`REG_D];
-                               `INSN_reg_E:    tmp <= registers[`REG_E];
-                               `INSN_reg_H:    tmp <= registers[`REG_H];
-                               `INSN_reg_L:    tmp <= registers[`REG_L];
-                               endcase
-                       end
-                       `INSN_LD_reg_imm16: begin
-                               `EXEC_INC_PC;
-                               case (cycle)
-                               0:      begin
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               1:      begin
-                                               `EXEC_NEXTADDR_PCINC;
-                                               rd <= 1;
-                                       end
-                               2: begin `EXEC_NEWCYCLE; end
-                               endcase
-                       end
-                       `INSN_LD_SP_HL: begin
-                               case (cycle)
-                               0:      begin
-                                               tmp <= registers[`REG_H];
-                                       end
-                               1:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                               tmp <= registers[`REG_L];
-                                       end
-                               endcase
-                       end
-                       `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
-                               case (cycle)
-                               0:      begin
-                                               wr <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: wdata <= registers[`REG_A];
-                                               `INSN_stack_BC: wdata <= registers[`REG_B];
-                                               `INSN_stack_DE: wdata <= registers[`REG_D];
-                                               `INSN_stack_HL: wdata <= registers[`REG_H];
-                                               endcase
-                                       end
-                               1:      begin
-                                               wr <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]}-1;
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: wdata <= registers[`REG_F];
-                                               `INSN_stack_BC: wdata <= registers[`REG_C];
-                                               `INSN_stack_DE: wdata <= registers[`REG_E];
-                                               `INSN_stack_HL: wdata <= registers[`REG_L];
-                                               endcase
-                                       end
-                               2:      begin /* Twiddle thumbs. */ end
-                               3:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
-                       `INSN_POP_reg: begin    /* POP is 12 cycles! */
-                               case (cycle)
-                               0:      begin
-                                               rd <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
-                                       end
-                               1:      begin
-                                               rd <= 1;
-                                               address <= {registers[`REG_SPH],registers[`REG_SPL]};
-                                       end
-                               2:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
-                       `INSN_LDH_AC: begin
-                               case (cycle)
-                               0:      begin
-                                               address <= {8'hFF,registers[`REG_C]};
-                                               if (opcode[4]) begin    // LD A,(C)
-                                                       rd <= 1;
-                                               end else begin
-                                                       wr <= 1;
-                                                       wdata <= registers[`REG_A];
-                                               end
-                                       end
-                               1:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
-                       `INSN_LDx_AHL: begin
-                               case (cycle)
-                               0:      begin
-                                               address <= {registers[`REG_H],registers[`REG_L]};
-                                               if (opcode[3]) begin    // LDx A, (HL)
-                                                       rd <= 1;
-                                               end else begin
-                                                       wr <= 1;
-                                                       wdata <= registers[`REG_A];
-                                               end
-                                       end
-                               1:      begin
-                                               `EXEC_NEWCYCLE;
-                                               `EXEC_INC_PC;
-                                       end
-                               endcase
-                       end
-                       `INSN_ALU8: begin
-                               if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
-                                       // fffffffff fuck your shit, read from (HL) :(
-                                       rd <= 1;
-                                       address <= {registers[`REG_H], registers[`REG_L]};
-                               end else begin
-                                       `EXEC_NEWCYCLE;
-                                       `EXEC_INC_PC;
-                                       case (opcode[2:0])
-                                       `INSN_reg_A:    tmp <= registers[`REG_A];
-                                       `INSN_reg_B:    tmp <= registers[`REG_B];
-                                       `INSN_reg_C:    tmp <= registers[`REG_C];
-                                       `INSN_reg_D:    tmp <= registers[`REG_D];
-                                       `INSN_reg_E:    tmp <= registers[`REG_E];
-                                       `INSN_reg_H:    tmp <= registers[`REG_H];
-                                       `INSN_reg_L:    tmp <= registers[`REG_L];
-                                       `INSN_reg_dHL:  tmp <= rdata;
-                                       endcase
-                               end
-                       end
-                       `INSN_ALU_A: begin
-                               `EXEC_NEWCYCLE;
-                               `EXEC_INC_PC;
-                       end
-                       `INSN_NOP: begin
-                               `EXEC_NEWCYCLE;
-                               `EXEC_INC_PC;
-                       end
+                       `define EXECUTE
+                       `include "allinsns.v"
+                       `undef EXECUTE
                        `INSN_RST: begin
                                case (cycle)
                                0:      begin
@@ -552,264 +366,41 @@ module GBZ80Core(
                                        end
                                endcase
                        end
-                       default:
-                               $stop;
-                       endcase
-                       state <= `STATE_WRITEBACK;
-               end
-               `STATE_WRITEBACK: begin
-                       casex (opcode)
-                       `INSN_LD_reg_imm8:
-                               case (cycle)
-                               0:      begin end
-                               1:      case (opcode[5:3])
-                                       `INSN_reg_A:    begin registers[`REG_A] <= rdata; end
-                                       `INSN_reg_B:    begin registers[`REG_B] <= rdata; end
-                                       `INSN_reg_C:    begin registers[`REG_C] <= rdata; end
-                                       `INSN_reg_D:    begin registers[`REG_D] <= rdata; end
-                                       `INSN_reg_E:    begin registers[`REG_E] <= rdata; end
-                                       `INSN_reg_H:    begin registers[`REG_H] <= rdata; end
-                                       `INSN_reg_L:    begin registers[`REG_L] <= rdata; end
-                                       `INSN_reg_dHL:  begin /* Go off to cycle 2 */ end
-                                       endcase
-                               2:      begin end
-                               endcase
-                       `INSN_HALT: begin
-                               /* Nothing needs happen here. */
-                               /* XXX Interrupts needed for HALT. */
-                       end
-                       `INSN_LD_HL_reg: begin
-                               /* Nothing of interest here */
-                       end
-                       `INSN_LD_reg_HL: begin
+                       `INSN_VOP_INTR: begin
                                case (cycle)
-                               0:      begin end
-                               1:      begin
-                                               case (opcode[5:3])
-                                               `INSN_reg_A:    registers[`REG_A] <= tmp;
-                                               `INSN_reg_B:    registers[`REG_B] <= tmp;
-                                               `INSN_reg_C:    registers[`REG_C] <= tmp;
-                                               `INSN_reg_D:    registers[`REG_D] <= tmp;
-                                               `INSN_reg_E:    registers[`REG_E] <= tmp;
-                                               `INSN_reg_H:    registers[`REG_H] <= tmp;
-                                               `INSN_reg_L:    registers[`REG_L] <= tmp;
-                                               endcase
+                               0:      begin
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} - 1;
+                                               wdata <= registers[`REG_PCH];
+                                               wr <= 1;
                                        end
-                               endcase
-                       end
-                       `INSN_LD_reg_reg: begin
-                               case (opcode[5:3])
-                               `INSN_reg_A:    registers[`REG_A] <= tmp;
-                               `INSN_reg_B:    registers[`REG_B] <= tmp;
-                               `INSN_reg_C:    registers[`REG_C] <= tmp;
-                               `INSN_reg_D:    registers[`REG_D] <= tmp;
-                               `INSN_reg_E:    registers[`REG_E] <= tmp;
-                               `INSN_reg_H:    registers[`REG_H] <= tmp;
-                               `INSN_reg_L:    registers[`REG_L] <= tmp;
-                               endcase
-                       end
-                       `INSN_LD_reg_imm16: begin
-                               case (cycle)
-                               0:      begin /* */ end
                                1:      begin
-                                               case (opcode[5:4])
-                                               `INSN_reg16_BC: registers[`REG_C] <= rdata;
-                                               `INSN_reg16_DE: registers[`REG_E] <= rdata;
-                                               `INSN_reg16_HL: registers[`REG_L] <= rdata;
-                                               `INSN_reg16_SP: registers[`REG_SPL] <= rdata;
-                                               endcase
-                                       end
-                               2: begin
-                                               case (opcode[5:4])
-                                               `INSN_reg16_BC: registers[`REG_B] <= rdata;
-                                               `INSN_reg16_DE: registers[`REG_D] <= rdata;
-                                               `INSN_reg16_HL: registers[`REG_H] <= rdata;
-                                               `INSN_reg16_SP: registers[`REG_SPH] <= rdata;
-                                               endcase
-                                       end
-                               endcase
-                       end
-                       `INSN_LD_SP_HL: begin
-                               case (cycle)
-                               0:      registers[`REG_SPH] <= tmp;
-                               1: registers[`REG_SPL] <= tmp;
-                               endcase
-                       end
-                       `INSN_PUSH_reg: begin   /* PUSH is 16 cycles! */
-                               case (cycle)
-                               0:      {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                               {registers[`REG_SPH],registers[`REG_SPL]} - 1;
-                               1:      {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                               {registers[`REG_SPH],registers[`REG_SPL]} - 1;
-                               2:      begin /* type F */ end
-                               3:      begin /* type F */ end
-                               endcase
-                       end
-                       `INSN_POP_reg: begin    /* POP is 12 cycles! */
-                               case (cycle)
-                               0:      {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                               {registers[`REG_SPH],registers[`REG_SPL]} + 1;
-                               1:      begin
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: registers[`REG_F] <= rdata;
-                                               `INSN_stack_BC: registers[`REG_C] <= rdata;
-                                               `INSN_stack_DE: registers[`REG_E] <= rdata;
-                                               `INSN_stack_HL: registers[`REG_L] <= rdata;
-                                               endcase
-                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
-                                                       {registers[`REG_SPH],registers[`REG_SPL]} + 1;
+                                               address <= {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+                                               wdata <= registers[`REG_PCL];
+                                               wr <= 1;
                                        end
                                2:      begin
-                                               case (opcode[5:4])
-                                               `INSN_stack_AF: registers[`REG_A] <= rdata;
-                                               `INSN_stack_BC: registers[`REG_B] <= rdata;
-                                               `INSN_stack_DE: registers[`REG_D] <= rdata;
-                                               `INSN_stack_HL: registers[`REG_H] <= rdata;
-                                               endcase
-                                       end
-                               endcase
-                       end
-                       `INSN_LDH_AC: begin
-                               case (cycle)
-                               0:      begin /* Type F */ end
-                               1:      if (opcode[4])
-                                               registers[`REG_A] <= rdata;
-                               endcase
-                       end
-                       `INSN_LDx_AHL: begin
-                               case (cycle)
-                               0:      begin /* Type F */ end
-                               1:      begin
-                                               if (opcode[3])
-                                                       registers[`REG_A] <= rdata;
-                                               {registers[`REG_H],registers[`REG_L]} <=
-                                                       opcode[4] ? // if set, LDD, else LDI
-                                                       ({registers[`REG_H],registers[`REG_L]} - 1) :
-                                                       ({registers[`REG_H],registers[`REG_L]} + 1);
+                                               `EXEC_NEWCYCLE;
                                        end
                                endcase
                        end
-                       `INSN_ALU8: begin
-                               if ((opcode[2:0] == `INSN_reg_dHL) && (cycle == 0)) begin
-                                       /* Sit on our asses. */
-                               end else begin          /* Actually do the computation! */
-                                       case (opcode[5:3])
-                                       `INSN_alu_ADD: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] + tmp;
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] + tmp) == 0) ? 1'b1 : 1'b0,
-                                                         /* N */ 1'b0,
-                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
-                                                         /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_ADC: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]};
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] + tmp + {7'b0,registers[`REG_F][4]}) == 0) ? 1'b1 : 1'b0,
-                                                         /* N */ 1'b0,
-                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} + {1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]}) >> 4 == 1) ? 1'b1 : 1'b0,
-                                                         /* C */ (({1'b0,registers[`REG_A]} + {1'b0,tmp} + {8'b0,registers[`REG_F][4]}) >> 8 == 1) ? 1'b1 : 1'b0,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_SUB: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] - tmp;
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0,
-                                                         /* N */ 1'b1,
-                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
-                                                         /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_SBC: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]});
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] - (tmp + {7'b0,registers[`REG_F][4]})) == 0) ? 1'b1 : 1'b0,
-                                                         /* N */ 1'b1,
-                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} - ({1'b0,tmp[3:0]} + {4'b0,registers[`REG_F][4]})) >> 4 == 1) ? 1'b1 : 1'b0,
-                                                         /* C */ (({1'b0,registers[`REG_A]} - ({1'b0,tmp} + {8'b0,registers[`REG_F][4]})) >> 8 == 1) ? 1'b1 : 1'b0,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_AND: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] & tmp;
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] & tmp) == 0) ? 1'b1 : 1'b0,
-                                                         3'b010,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_OR: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] | tmp;
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] | tmp) == 0) ? 1'b1 : 1'b0,
-                                                         3'b000,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_XOR: begin
-                                               registers[`REG_A] <=
-                                                       registers[`REG_A] ^ tmp;
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] ^ tmp) == 0) ? 1'b1 : 1'b0,
-                                                         3'b000,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       `INSN_alu_CP: begin
-                                               registers[`REG_F] <=
-                                                       { /* Z */ ((registers[`REG_A] - tmp) == 0) ? 1'b1 : 1'b0,
-                                                         /* N */ 1'b1,
-                                                         /* H */ (({1'b0,registers[`REG_A][3:0]} - {1'b0,tmp[3:0]}) >> 4 == 1) ? 1'b1 : 1'b0,
-                                                         /* C */ (({1'b0,registers[`REG_A]} - {1'b0,tmp}) >> 8 == 1) ? 1'b1 : 1'b0,
-                                                         registers[`REG_F][3:0]
-                                                       };
-                                       end
-                                       default:
-                                               $stop;
-                                       endcase
-                               end
+                       `INSN_DI: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
                        end
-                       `INSN_ALU_A: begin
-                               case(opcode[5:3])
-                               `INSN_alu_RLCA: begin
-                                       registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_A][7]};
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]};
-                               end
-                               `INSN_alu_RRCA: begin
-                                       registers[`REG_A] <= {registers[`REG_A][0],registers[`REG_A][7:1]};
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]};
-                               end
-                               `INSN_alu_RLA: begin
-                                       registers[`REG_A] <= {registers[`REG_A][6:0],registers[`REG_F][4]};
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][7],registers[`REG_F][3:0]};
-                               end
-                               `INSN_alu_RRA: begin
-                                       registers[`REG_A] <= {registers[`REG_A][4],registers[`REG_A][7:1]};
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],registers[`REG_A][0],registers[`REG_F][3:0]};
-                               end
-                               `INSN_alu_CPL: begin
-                                       registers[`REG_A] <= ~registers[`REG_A];
-                                       registers[`REG_F] <= {registers[`REG_F][7],1'b1,1'b1,registers[`REG_F][4:0]};
-                               end
-                               `INSN_alu_SCF: begin
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],1,registers[`REG_F][3:0]};
-                               end
-                               `INSN_alu_CCF: begin
-                                       registers[`REG_F] <= {registers[`REG_F][7:5],~registers[`REG_F][4],registers[`REG_F][3:0]};
-                               end
-                               endcase
+                       `INSN_EI: begin
+                               `EXEC_NEWCYCLE;
+                               `EXEC_INC_PC;
                        end
-                       `INSN_NOP: begin /* NOP! */ end
+                       default:
+                               $stop;
+                       endcase
+                       state <= `STATE_WRITEBACK;
+               end
+               `STATE_WRITEBACK: begin
+                       casex (opcode)
+                       `define WRITEBACK
+                       `include "allinsns.v"
+                       `undef WRITEBACK
                        `INSN_RST: begin
                                case (cycle)
                                0:      begin /* type F */ end
@@ -896,6 +487,21 @@ module GBZ80Core(
                                        end
                                endcase
                        end
+                       `INSN_VOP_INTR: begin
+                               case (cycle)
+                               0:      begin end
+                               1:      begin end
+                               2:      begin
+                                               ie <= 0;
+                                               {registers[`REG_PCH],registers[`REG_PCL]} <=
+                                                       {8'b0,jaddr};
+                                               {registers[`REG_SPH],registers[`REG_SPL]} <=
+                                                       {registers[`REG_SPH],registers[`REG_SPL]} - 2;
+                                       end
+                               endcase
+                       end
+                       `INSN_DI: ie <= 0;
+                       `INSN_EI: iedelay <= 1;
                        default:
                                $stop;
                        endcase
This page took 0.04708 seconds and 4 git commands to generate.